Abstract:Polyether ether ketone (PEEK) is a semi-crystalline thermoplastic polymer with excellent thermo-mechanical properties, bio-compatibility, corrosion resistance, and 3D printability. Due to these merits, it has wide applications in aeronautics and biomedical devices. However, PEEK's excellent thermo-mechanical properties come from its complicated crystalline domains, making it hard to predict and to design PEEK structures under complex service conditions. In this paper, we studied the thermomechanical behaviors of PEEK with stretch-induced anisotropy and developed a constitutive model to incorporate the influence of the complex loading history along different loading axes. From the experiments, it was found that when it is stretched, PEEK demonstrates viscoplastic behaviors with reduced transversal modulus and yield stress in the subsequent loading, due to the initiation and growth of voids during stretching. The tensile sample also shows a necking behavior at relatively low temperature. To capture these behaviors, the constitutive model consists of two main parts. The undamaged part has three branches, one hyperelastic branch for the nonlinear elastic behavior, one viscoelastic branch for glass transition and relaxation in the amorphous domains, and one plastic branch for yielding and hardening in the crystalline domains. The damaged loose-chain part with history-dependent reduced relaxation time is used to capture the microscopic interface debonding between the crystallites and the amorphous domains. Compared with the experimental results, this model captures the stretch-induced volume expansion and the anisotropic evolution of material properties. This developed model is also able to capture the temperature-dependent necking phenomenon and the corresponding nominal stress-strain behaviors in the uniaxial tensile tests at different strain rates and temperatures. The developed model can be used to facilitate the design of PEEK-based structures under complicated loading conditions.

Micromorphology and Thermostability of Peek/Pei/Pes Plastics Alloys

Thermal, Crystalline, and Tribological Properties of PEEK/PEI/PES Plastics Alloys

Structures and Mechanical Properties of PEEK/PEI/PES Plastics Alloys Blent by Extrusion Molding Used for Cable Insulating Jacketing

Research on Friction and Wear Behaviors of Peek/Pei/Pes Plastics Alloys under Sliding Contact Condition

Microstructure, mechanical properties and heat-resistance properties of bismaleimide composites modified synergistically by alumina and two kinds of thermoplastic resins

Fabrication and Characterization of PEEK/PEI Multilayer Composites

Study on the Overmolding Process of Carbon-Fiber-Reinforced Poly (Aryl Ether Ketone) (PAEK)/Poly (Ether Ether Ketone) (PEEK) Thermoplastic Composites

Influence of Thermal Processing Conditions on Mechanical and Material Properties of 3D Printed Thin-Structures Using PEEK Material

Thermomechanical Behaviors of Polyether Ether Ketone (PEEK) with Stretch-Induced Anisotropy

Effects of processing parameters and annealing on the mechanical properties of polyether ether ketone(PEEK) via fused deposition modeling(FDM)

Effect of molecular weight on mechanical properties and microstructure of 3D printed poly(ether ether ketone)

Morphology and Properties of Injection Molded Microcellular Poly(Ether Imide) (pei)/polypropylene (pp) Foams

Machinability of the Thermoplastic Polymers: PEEK, PI, and PMMA

Bi-directional regulatable mechanical properties of 3D braided polyetheretherketone (PEEK)

Effect of PEEK Fused Deposition Modeling Temperature on Tensile Properties of Parts

A STUDY ON THERMAL AND DYNAMIC MECHANICAL PROPERTIES OF PPESK/PES BLENDS

An experimental investigation on the tensile properties of PEEK-PEI sandwich structures prepared via fused filament fabrication

Effect of 3D Printing Process Parameters and Heat Treatment Conditions on the Mechanical Properties and Microstructure of PEEK Parts

Achieving injection molding interlayer strength via powder assisted hot isostatic pressing in material extrusion polyetheretherketone

Molding of polyether ether ketone (PEEK) and its composites: a review

Effects of FDM parameters and annealing on the mechanical and tribological properties of PEEK