Abstract:The formation process of surface coatings fabricated with laser cladding is very complicated and coating quality is closely related to laser cladding process parameters. Generally, the optimization and control of process parameters play key roles when preparing high-quality ceramic coating. In this paper, three reasonable parameters were selected for each process parameter based on the preliminary experiment. The experiment of Ti(C, N) ceramic coating prepared with laser cladding was designed via the Taguchi method. The laser power, spot diameter, overlapping ratio, and scanning velocity were selected as the main process parameters, and their effects on coating micro-hardness were analyzed using the signal-to-noise (S/N) ratio and analysis of variance (ANOVA). Then, based on the back-propagation neural network (BPNN) and quantum-behaved particle swarm optimization (QPSO) algorithm, we created the prediction model of BPNN-QPSO neural network for laser cladding Ti(C, N) ceramic coating. The mapping of process parameters to the micro-hardness of the coating was obtained according to the model and we analyzed the influence of process parameters that interacted with the coating’s micro-hardness. The results showed that the interaction of laser cladding process parameters had a significant effect on the micro-hardness of the coating. The established BPNN-QPSO neural network model was able to map the relationship between laser cladding process parameters and coating micro-hardness. The process parameters optimized by this model had similar results with ANOVA. This research provides guidance for the selection and control of ceramic coating process parameters Ti(C, N) prepared via laser cladding.

Process Parameter Optimization of Plasma Sprayed Nanostructured Al2o3-13 % Tio2 Coating Based on Genetic Algorithm

Optimization of the Process Parameters of Nanostructured AT13 Coatings Prepared by Micro-plasma Spraying

Optimization of Atmospheric Plasma Spray Process Parameters by Orthogonal Experimental Design for Al2O3-13wt.％TiO2 Coating

Plasma Spray Process Operating Parameters Optimization Based on Artificial Intelligence

Process Optimization of Supersonic Plasma Transfer Arc Spraying Aluminum Coating by Response Surface Method

Process Parameter Optimization When Preparing Ti(C, N) Ceramic Coatings Using Laser Cladding Based on a Neural Network and Quantum-Behaved Particle Swarm Optimization Algorithm

Mechanical Properties Evaluation and Parametric Optimization of Atmospheric Plasma Spray NiTi Coating

Parameters Optimization of Plasma Hardening Process Using Genetic Algorithm and Neural Network

Effect of Spraying Parameters on the Microstructure and Mechanical Properties of Micro-Plasma Sprayed Alumina-Titania Coatings

Optimization of Plasma Spray Parameters for Ni-Cr-B-Si/Al2O3-TiO2 Coating

Prediction and Analysis of the Grit Blasting Process on the Corrosion Resistance of Thermal Spray Coatings Using a Hybrid Artificial Neural Network

Optimization of Plasma Deposition Manufacturing Parameters Using a Hybrid ANN-GAs Method

Fabrication and Evaluation of Plasma Sprayed Nanostructured Alumina–titania Coatings with Superior Properties

Process Optimization and Influencing Factors of Supersonic High-Energy Plasma Spraying of Al2O3-PF Composite Coatings on Polymer Matrix Composite Surface

Multi-Objective Optimization of Laser Cladding Parameters Based on BP Neural Network

Dilution Optimization of Laser Cladding Assisted by Pulsed Current Based on Genetic Algorithm and Neural Network

The dependency of microstructure and properties of nanostructured coatings on plasma spray conditions

Parameters Optimization of Arc Spray Process for Aluminum Based Cored Wire

Microstructure and Property of Nanostructured Al2O3-13 Wt% TiO2 Coatings Prepared by Plasma Spraying

The Effect of Plasma Spray Parameters on the Quality of Al-Ni Coatings

Process Optimization for Aluminum Wire Bonding Based on DOE and BP Neural Network