Abstract:A lithium metaborate (LBO) surface modification is developed on high‐voltage spinel lithium nickel manganese oxide via a dry mixing method, significantly improving the cycling stability in full cells with a practical 3 mAh cm−2 capacity. Detailed characterizations reveal LBO's impact on the cathode, electrolyte, and anode, offering insights into surface modification for other high‐voltage cathode materials and related electrolyte additive designs. The high‐voltage spinel lithium nickel manganese oxide (LNMO) with an operating voltage of 4.8 V is a promising cathode material for next‐generation lithium‐ion batteries (LIBs). However, LNMO/graphite (LNMO/Gr) full cells suffer capacity fading, which limits their practical applications. In this study, lithium metaborate (LBO) is applied on the LNMO surface to improve the full cell performance via a dry mixing method. The LBO‐coated LNMO delivers much better cycling stability than the uncoated LNMO in full cells with a practical 3 mAh cm−2 areal capacity. Different characterizations are performed to understand the coating effect to track the boron and its impact on the cathode, electrolyte, and anode. The LBO‐coated LNMO owns a 5 nm cathode electrolyte interphase (CEI) with mitigated phase change after long‐term cycling. The uncoated LNMO has negligible CEI with obvious phase change. However, no boron can be detected on the surface of the coated sample. Electrolyte and anode analyses indicate that the coating acts as an additive reservoir, gradually dissolves into the electrolyte, and generates BF4− species. As a result, Nickel/Manganese (Ni/Mn) dissolution from LNMO and the extensive generation of solid electrolyte interphase (SEI) on the anode side is mitigated, thus improving the full‐cell cycling stability to a great extent.

Insight into the High-Temperature Cycling Stability of a Micro-nanostructured LiNi<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub>/Graphene Composite Cathode for High-Voltage Lithium-Ion Batteries

Cycling Stability of 5V LiMn1.5Ni0.5O4 Spinel Particles Coated with a Thin Film Mixed Conductor

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

Impact of synergistic interfacial modification on the electrochemical performance of LiNi0.5Mn1.5O4 cathode materials

The role of graphene in nano-layered structure and long-term cycling stability of MnxCoyNizCO3 as an anode material for lithium-ion batteries

High Rate Cycling Performance of Nanosized Li4Ti5O12/graphene Composites for Lithium Ion Batteries

Stabilizing a high-voltage LiNi0.5Mn1.5O4 cathode towards all solid state batteries: a Li-Al-Ti-P-O solid electrolyte nano-shell with a host material

N-doped engineering of a high-voltage LiNi0.5Mn1.5O4 cathode with superior cycling capability for wide temperature lithium-ion batteries

Effect of Single-Walled Carbon Nanotube Sub-carbon Additives and Graphene Oxide Coating for Enhancing the 5 V LiNi 0.5 Mn 1.5 O 4 Cathode Material Performance in Lithium-Ion Batteries

Synthesis of High-Voltage Spinel Lini0.5mn1.5o4 by Mn2o3 Nanosheets for Lithium-Ion Batteries with Superior Cycle Life Span

Aligned Li+ Tunnels in Core-shell Li(NixMnyCoz)O2@LiFePO4 Enhances Its High Voltage Cycling Stability as Li-ion Battery Cathode.

Inverse Spinel-Structured Mg2MnO4 Coating to Enable Superior Thermal Stability of LiNi0.83Co0.12Mn0.05O2 Cathodes for Lithium-Ion Batteries

High-voltage LiNi0.5Mn1.5O4 Thin Film Cathodes Stabilized by LiPON Solid Electrolyte Coating to Enhance Cyclic Stability and Rate Capability

A Novel Perovskite Electron-Ion Conductive Coating to Simultaneously Enhance Cycling Stability and Rate Capability of Li1.2Ni0.13Co0.13Mn0.54O2 Cathode Material for Lithium-Ion Batteries

The role of graphene in nano-layered structure and long-term cycling stability of Mn<sub>x</sub>Co<sub>y</sub>Ni<sub>z</sub>CO<sub>3</sub> as an anode material for lithium-ion batteries

Understanding the Role of Lithium Borate as the Surface Coating on High Voltage Single Crystal LiNi0.5Mn1.5O4

Improving Fast-Charging Capability of High-Voltage Spinel LiNi0.5Mn1.5O4 Cathode under Long-Term Cyclability Through Co-Doping Strategy

Improvement of the cyclic deterioration and structural evolution of Li[Li0.2Ni0.2Mn0.6]O2 cathode material by controlling initial charging voltages

Enhanced high-temperature cycling stability of LiNi1/3Co1/3Mn1/3O2-coated LiMn2O4 as cathode material for lithium ion batteries

Design and Synthesis of the Composites of Multiporous NiMnO3 Micro-Nano Structure Spheres and Graphene with Alleviated Side Reaction and Enhanced Performances As Anode Materials for Lithium Ion Batteries

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries