Abstract:It is difficult to simultaneously increase strength and toughness of austenitic stainless steels through traditional heat treatment and alloying. However, adding nano-sized ceramic particles is a potential method to manipulate the microstructure and mechanical properties of austenitic stainless steels. In this study, TiC-TiB2 nanoparticles were introduced into austenitic stainless steel using an aluminum master alloy. Adding 0.02wt% nanoparticles effectively refined the substrates including the dendritic ferrite and austenite and reduced the grain size from 23.7 μm to 18.4 μm. The edge-to-edge model indicated that the nanoparticles act as heterogeneous cores to facilitate the nucleation rates. For mechanical properties, the addition of nanoparticles simultaneously enhanced the hardness, yield strength, tensile strength and impact toughness of the austenitic stainless steels without sacrificing the ductility. The yield strength and tensile strength of as-cast austenitic stainless steels were enhanced by 4.8% and 2.1%, 7.2% and 3.9%, 10.0% and 5.7% at the temperatures of 20 °C, 200 °C, and 400 °C, respectively. The impact toughness was improved by 4.2%, 5.9%, and 4.3% at the temperatures of -20 °C, 0 °C, and 20 °C. Also, the presence of nanoparticles increased the yield strength and tensile strength of forged austenitic stainless steels by 16.6% and 5.9%, 17.7% and 7.7%, 18.5% and 12.2% at the temperatures of 20 °C, 200 °C, and 400 °C, respectively. The impact toughness was increased by 11.6%, 8.6% and 11.3% at the temperatures of -20 °C, 0 °C, and 20 °C. The nanoparticles refined the grains, inhibited dislocation movement, scattered large cracks and distributed the external loads more uniformly to strengthen and toughen the austenitic stainless steels. In wear tests, the nanoparticle reinforced austenitic stainless steels showed higher wear resistance against adhesive wear and abrasive wear by impeding the nucleation and growth of cracks, retarding the dislocation migration and plastic deformation and bearing the external loads. The wear volumes of as-cast and forged austenitic stainless steels were reduce by 15.7% and 21.5%. This innovative approach provided a promising strategy to produce high-performance austenitic stainless steels and serve as a reference in the development of other nanoparticle reinforced ferrous materials.

In-Situ Nanoparticles: A New Strengthening Method for Metallic Structural Material

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Application of Nanoparticles in Cast Steel: an Overview

A nanodispersion-in-nanograins strategy for ultra-strong, ductile and stable metal nanocomposites

Nanostructural Metallic Materials: Structures and Mechanical Properties

Ultrafine grained metals and metal matrix nanocomposites fabricated by powder processing and thermomechanical powder consolidation

Simultaneous Enhancement of Strength and Ductility with Nano Dispersoids in Nano and Ultrafine Grain Metals: a Brief Review

Nanoparticle enabled high performance high modulus steels

Simultaneous enhancement of strength and ductility by combining heterogeneous microstructure and nanoprecipitates

Synergistic optimization in microstructure and mechanical properties of low carbon steel via trace amount of nano-sized TiC-TiB2

Micromechanism involved in ultrafine grained ferrite/martensite dual phase steels strengthened by nanoscale Cu-rich precipitates

Regain Strain-Hardening in High-Strength Metals by Nanofiller Incorporation at Grain Boundaries.

Manufacture of Nano-Sized Particle-Reinforced Metal Matrix Composites: A Review

Clustering, nano-scale precipitation and strengthening of steels

Microstructure and Mechanical Properties of Austenitic Stainless Steels Manipulated by Trace TiC-TiB2 Nanoparticles

Nanoscale Interface Engineering in a High Cr-Co Martensitic Steel

Strengthening Steels by Inducing Residual Stresses Via Mechanical Attrition

Make Nanostructured Metal Exceptionally Tough by Introducing Non-Localized Fracture Behaviors

A novel dual-strengthening technology combining external second phase nanoparticle method and hot compression deformation process in micro-alloyed medium carbon steel

Enhancing Strength-Ductility Balance in Fe-Mn-Al-C-Ni Austenitic Low-Density Steel Via Intragranular Dual-Nanoprecipitation

Manipulating the interfacial structure of nanomaterials to achieve a unique combination of strength and ductility