Abstract:Deformation-induced martensite transformation from metastable retained austenite is one of the most efficient strain-hardening mechanisms contributing to the enhancement of strength-ductility synergy in advanced high-strength steels. However, the hard transformation product (often -martensite) and the H redistribution associated with phase transformation essentially decrease materials' resistance to hydrogen embrittlement. To solve this fundamental conflict, we introduce a new microstructure architecting strategy based on an accurately design of core–shell compositional distribution inside the austenite phase. We employed this approach in a typical medium Mn steel (8 wt.% Mn) with an ultrafine grained austenite-ferrite microstructure. We produced a high Mn content (15–16 wt.%) in the austenite shell region and a low Mn content (~ 12 wt.%) in the core region, through a thermodynamics-guided two-step austenite reversion treatment. During room-temperature deformation, the austenite core transforms continuously starting from a low strain, providing a high and persistent strain-hardening rate. The transformation of Mn-rich austenite shell, on the other hand, occurs only at the latest regime of the deformation, thus effectively inhibiting the nucleation of H-induced cracks at ferrite/deformation-induced martensite interfaces as well as suppressing their growth and percolation. This step-wise transformation, tailored directly targeted to protect the hydrogen-sensitive microstructure defects (interfaces), results in a significantly enhanced hydrogen embrittlement resistance without sacrificing the mechanical performance in hydrogen-free condition. The design of compositional core–shell structure is expected to be applicable to, at least, other multiphase advanced high-strength steels containing metastable austenite.

Nanoparticle enabled high performance high modulus steels

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Synergistic optimization in microstructure and mechanical properties of low carbon steel via trace amount of nano-sized TiC-TiB2

Role and mechanism of innovative addition process of trace nano-TiC p in microstructure manipulation and significant mechanical properties enhancement of H13 steels

Additive manufacturing of titanium alloys with enhanced strength and uniform ductility via multi-element alloying

Electron Beam Welding and Post Heat Treatment of a New Near-Beta High-Strength Ti-4Al-5Mo-5V-5Cr-1Nb Alloy

An ultra-high-strength 12Mn maraging steel realized via nanoscale heterostructure engineering

Simultaneous enhancements of strength and ductility of a selective laser melted H13 steel through inoculation treatment

Simultaneously enhanced strength and toughness of cast medium carbon steels matrix composites by trace nano-sized TiC particles

Enhancing the Hydrogen Embrittlement Resistance of Medium Mn Steels by Designing Metastable Austenite with a Compositional Core–shell Structure

Porous NiTiNb alloys with superior strength and ductility induced by modulating eutectic microregion

Achieving Unexpected Strength and Ductility Synergies in Heterogeneous Metastable Lamellar Steels

Enhanced mechanical performance of duplex stainless steels via dense core-shell nano-inclusions in-situ formed upon selective laser melting

A Novel Additive Manufactured Reduced Activation Ferritic/martensitic Steel Enhanced by In-Situ Nanoparticles Benefiting from Oxygen Addition

Tailoring the metastable reversed austenite from metastable Mn-rich carbides

Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys

Hot-work die steel with superior mechanical properties at room and high temperatures prepared via a combined approach of composition design and nanoparticle modification

The Fabrication of Ultrahigh-Strength Steel with a Nanolath Structure via Quenching-Partitioning-Tempering

Enhanced High‐Temperature Strength of a Low‐Density Dispersion‐Strengthened Fe–Mn–Al–C Steel

Microstructure Characteristics, Mechanical Properties and Strain Hardening Behavior of B2 Intermetallic Compound-Strengthening Fe-16Mn-9Al-0.8C-3Ni Steel Fabricated by Twin-Roll Strip Casting, Cold Rolling and Annealing

Study on the Dissolution and Precipitation Behavior of Self-Designed (NbTi)C Nanoparticles Addition in 1045 Steel