Abstract:This work introduces the capacitively coupled contactless conductivity detection ( $\text{C}^{{4}}\text{D}$ ) technique into nondestructive testing (NDT) of carbon fiber-reinforced polymer (CFRP) and proposes a new resistance measurement method of CFRP tubes. The proposed method does not require direct contact between the electrodes and the carbon fiber. Therefore, the electrical resistance of CFRP can be measured without the treatments required by traditional electrical methods that may lead to surface or structural damage. The equivalent circuit model of the new method is established, and the challenges are analyzed. Simulation and experiment are conducted with woven fabric CFRP tubes to verify the feasibility of the proposed method, including the range of workable frequency, the effectiveness of the circuit model, and the capability of damage detection. Research results show that a relatively high working frequency is required to accurately measure the interested resistance and sense the resistance change. By selecting a workable frequency, the effectiveness of the circuit model is verified. Research results indicate that the stray capacitance between the electrodes has little effect on resistance measurement, and the capacitor–resistor–capacitor model is still applicable. Research results also verify the feasibility of the proposed method for damage detection. It is able to sense the resistance change resulted from the damage of CFRP, either the conductivity changes in simulation or actual cutting damage in experiment.

Researches on NDT of Metallic Foam with Direct Current Potential Drop Method

Development of A Novel Fast Solver for the Direct Current Potential Drop Method and Its Verification with Nondestructive Testing of Metallic Foam

A Fast Forward Scheme for Numerical Simulation of NDT Signals of DC Potential Drop Method

Quantitative NDT of Metallic Foam Based on Direct Current Potential Drop

Quantitative Non-Destructive Testing of Metallic Foam Based on Direct Current Potential Drop Method

Direct Current Potential Drop Inspection Technique for Metallic Foam

Efficient Numerical Simulation of Dc Potential Drop Signals for Application to Ndt of Metallic Foam

Numerical Dispersion Optimized Leapfrog Adi-Fdtd Method And Its Application For Capturing Surface Current Distributions Of Complex Objects Illuminated By An Electromagnetic Pulse (Emp)

A New Electrical Resistance Measurement Method of Carbon Fiber-Reinforced Polymer Tubes Based on C⁴D Technique

Discontinuous Galerkin Time Domain Electric Field Integral Equation Method For Solving Non-Conformal Structures

An Efficient Numerical Scheme for Sizing of Cavity Defect in Metallic Foam from Signals of Dc Potential Drop Method

A Numerical Simulation Method for High-Frequency Eddy Current Testing Considering Displacement Current Effect

A Fast Forward Simulation Scheme for Eddy Current Testing of Crack in a Structure of Carbon Fiber Reinforced Polymer Laminate

Sizing of Metallic Foam Bubble Flaws Using Direct Current Potential Drop Signals with the Help of the Neural Network Method

NDT of Lattice Sandwich Metal Plate by Using DC Potential Drop Method

NDT of Cavity Defect in Metallic Plate Using Dc Potential Drop Method

Finite Element Research of Defects Detection in Pipeline Based on Remote Field Eddy Current

General Rule of Method for Measurement of Thickness and Crack Size by Electric Potential Drop Technique: Outline of the NDIS3426:2008

Reconstruction of Multiple Cavity Defects in Metallic Foam from DC Potential Drop Signals

Numerical Study of Dynamic Compression Process of Aluminum Foam with Material Point Method

Quantitative NDE of Welding Defects in Lattice Sandwich Metallic Plate by Using DC Potential Drop Method