Abstract:This work introduces the capacitively coupled contactless conductivity detection ( $\text{C}^{{4}}\text{D}$ ) technique into nondestructive testing (NDT) of carbon fiber-reinforced polymer (CFRP) and proposes a new resistance measurement method of CFRP tubes. The proposed method does not require direct contact between the electrodes and the carbon fiber. Therefore, the electrical resistance of CFRP can be measured without the treatments required by traditional electrical methods that may lead to surface or structural damage. The equivalent circuit model of the new method is established, and the challenges are analyzed. Simulation and experiment are conducted with woven fabric CFRP tubes to verify the feasibility of the proposed method, including the range of workable frequency, the effectiveness of the circuit model, and the capability of damage detection. Research results show that a relatively high working frequency is required to accurately measure the interested resistance and sense the resistance change. By selecting a workable frequency, the effectiveness of the circuit model is verified. Research results indicate that the stray capacitance between the electrodes has little effect on resistance measurement, and the capacitor–resistor–capacitor model is still applicable. Research results also verify the feasibility of the proposed method for damage detection. It is able to sense the resistance change resulted from the damage of CFRP, either the conductivity changes in simulation or actual cutting damage in experiment.

Quantitative Non-Destructive Testing of Metallic Foam Based on Direct Current Potential Drop Method

Quantitative NDT of Metallic Foam Based on Direct Current Potential Drop

Direct Current Potential Drop Inspection Technique for Metallic Foam

Researches on NDT of Metallic Foam with Direct Current Potential Drop Method

NDT of Cavity Defect in Metallic Plate Using Dc Potential Drop Method

Feasibility of non-destructive testing for aluminium sheaths of HV cables using ultrasonic guided waves

Efficient Numerical Simulation of Dc Potential Drop Signals for Application to Ndt of Metallic Foam

An Efficient Numerical Scheme for Sizing of Cavity Defect in Metallic Foam from Signals of Dc Potential Drop Method

Reconstruction of Multiple Cavity Defects in Metallic Foam from DC Potential Drop Signals

Development of A Novel Fast Solver for the Direct Current Potential Drop Method and Its Verification with Nondestructive Testing of Metallic Foam

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

A New Electrical Resistance Measurement Method of Carbon Fiber-Reinforced Polymer Tubes Based on C⁴D Technique

Sizing of Metallic Foam Bubble Flaws Using Direct Current Potential Drop Signals with the Help of the Neural Network Method

Sizing of cavity defect in metallic foam from DC potential drop signals with stochastic inversion methods

Quantitative NDE of Welding Defects in Lattice Sandwich Metallic Plate by Using DC Potential Drop Method

NDT of Lattice Sandwich Metal Plate by Using DC Potential Drop Method

Quantitative Nondestructive Estimation of Deep Defects in Conductive Structures

Local deformation on damping performance of integral-forming aluminum foam sandwich

Pulsed Eddy Current Nondestructive Testing for Defect Evaluation and Imaging of Automotive Lightweight Alloy Materials

Quantitative non-destructive evaluation method for impact damage using eddy current pulsed thermography

Energy Transfer Efficiency Based Nonlinear Ultrasonic Testing Technique for Debonding Defects of Aluminum Alloy Foam Sandwich Panels