Abstract:Compared with the integral imaging (Ⅱ) display based on the micro-lens array,the Ⅱ display based on the pinhole array has lower cost,lower weight,and thinner thickness.Moreover,the Ⅱ display based on the pinhole array is easy to realize a 3D/2D convertible display.The parameter design of pinhole array is one of the most important keys to design the Ⅱ display based on the pinhole array.The 3D viewing angle is also one of the most important parameters in the Ⅱ display based on the pinhole array.The effect of thickness of pinhole array on 3D viewing angle in the Ⅱ display was analyzed.According to the relationships between the aperture width and the thickness of the pinhole array,three imaging models of the Ⅱ display were established firstly.Then,three calculation formulas of the 3D viewing angle of the Ⅱ display were obtained through geometrical optics.Lately,a testing equipment of the Ⅱ display based on the pinhole array was developed.The experiment results proved the optimal thickness of the pinhole array was related to the pitch of the elemental image,the width of the pinhole and the distance between the pinhole array and the display panel.When the thickness of the pinhole array was equal to the optimal value,lights emitted from all pixels of each elemental image on the display panel were only modulated by the assigned pinhole.Thus,the maximum 3D viewing angle was obtained without crosstalk.When the thickness of the pinhole array was smaller than the optimal value,lights emitted from all pixels of each elemental image on the display panel were modulated by the assigned pinhole,and lights emitted from parts of pixels of each elemental image on the display panelwere also modulated by the other pinholes.Thus,the maximum 3D viewing angle was obtained with crosstalk.When the thickness was larger than the optimal value,lights emitted from parts of pixels of each elemental image on the display panel were modulated by the assigned pinhole.Accordingly,the 3D viewing angle was decreased and inversely proportional to the thickness of the pinhole array.

The Effect of Slit Aperture Width on the Performance of Integral Imaging Based on Parallax Barrier

Effect of Aperture Width on Performance Parameters in One-dimensional Integral Imaging 3D Display Based on Parallax Barrier

One-dimensional Integral Imaging Display Using a Variable Parallax Barrier

Effect of thickness of parallax barrier on viewing angle of one-dimensional integral imaging display

One-Dimensional Dual-View Integral Imaging Three-Dimensional Display Based on Parallax Barrier

Dual‐view one‐dimensional integral imaging display using parallax barrier

One-dimensional integral imaging based on parallax barrier

Analysis Of The Diffraction Effects For A Multi-View Autostereoscopic Three-Dimensional Display System Based On Shutter Parallax Barriers With Full Resolution

High Optical-Efficiency Integral Imaging Display with a Gradient-Aperture Parallax Barrier

Viewing Angle Enhancement for Integral Imaging Display Using Two Overlapped Panels

Effect of the Vertical /slanted Staggered Barrier on Autostereoscopic Displays

Dual-viewing-zone three-dimensional display using parallax barrier and barrier array

One-dimensional integral imaging displays using parallax barrier and lenticular lens array

3D Display Based on Parallax Barrier with Multiview Zones.

Effect of Thickness of Pinhole Array on Viewing Angle of Integral Imaging 3D Display

Integral Imaging 3D Display Based on Variable-Aperture Pinhole Array

Dual-View Integral Imaging 3d Display Using Polarizer Parallax Barriers

Multi-View 3d Display with High Brightness Based on A Parallax Barrier

Effect of Viewpoints on the Accommodation Response in Integral Imaging 3D Display

Full Screen 3d Visual Uniformity Design For The Multi-View Slant Lc Barrier Autostereoscopic Display

Viewing angle analysis of integral imaging1