Abstract:Background Integral imaging is considered one of the most promising three-dimensional display technologies, while the limited viewing angle is regarded as a primary disadvantage of integral imaging display to reach a commercial level. This paper proposes a viewing angle enhancement method for both liquid crystal display (LCD) and the projection-type three-dimensional integral imaging system. Methods The proposed wide-viewing integral imaging system is established by using the lenslet array coupling with the polarizers, light barriers, and enlarged elemental images array. The size of light barrier and polarizer is equal to the pitch of each lenslet, the light barrier prevents light rays from passing through, and the polarizer controls the passage of light ray in the specific polarization direction. In the projection-type integral imaging system, two orthogonal elemental images arrays (EIA) are projected onto the projection screen simultaneously by the corresponding projectors. In LCD integral imaging system, two orthogonal EIAs are displayed by use of an LCD screen which can switch the polarization direction of the EIA by time-multiplexed technology within the time constant of the eyes’ response time. Results The viewing angle can be enlarged dramatically by the improvement of the size of each elemental image according to the integral imaging principles. The experimental result shows that the proposed method exhibits approximately four times the viewing angle of conventional integral imaging with the same lens array. Conclusions The increment of viewing angle can be determined by the number of light barriers between two adjacently orthogonal polarizers, the more the light barrier, the larger the viewing angle.

One-dimensional integral imaging based on parallax barrier

One-dimensional integral imaging displays using parallax barrier and lenticular lens array

One-dimensional Integral Imaging Display Using a Variable Parallax Barrier

One-Dimensional Dual-View Integral Imaging Three-Dimensional Display Based on Parallax Barrier

High Optical-Efficiency Integral Imaging Display with a Gradient-Aperture Parallax Barrier

Dual‐view one‐dimensional integral imaging display using parallax barrier

Effect of thickness of parallax barrier on viewing angle of one-dimensional integral imaging display

Effect of Aperture Width on Performance Parameters in One-dimensional Integral Imaging 3D Display Based on Parallax Barrier

Dual-View Integral Imaging 3d Display Using Polarizer Parallax Barriers

1D Integral Imaging Based on Parallax Images' Virtual Reconstruction

The Effect of Slit Aperture Width on the Performance of Integral Imaging Based on Parallax Barrier

Dual-view 3D displays based on integral imaging

Wide-viewing integral imaging system using polarizers and light barriers array

Double‐viewing‐zone Integral Imaging 3D Display Without Crosstalk Based on a Tilted Barrier Array

Three-Dimensional Display Based on Dual Parallax Barriers with Uniform Resolution

3D Display Based on Parallax Barrier with Multiview Zones.

3D Display with Uniform Resolution and Low Crosstalk Based on Two Parallax Interleaved Barriers

Viewing-Angle-Enhanced and Dual-View Compatible Integral Imaging 3D Display Based on a Dual Pinhole Array

Integral Imaging Tabletop 3d Display System

Viewing angle analysis of integral imaging1

Dual-view Integral Imaging Three-Dimensional Display Using Polarized Glasses