Abstract:Digital holography is a versatile three-dimensional imaging technique that has the ability to record the complex wave-front of an imaged object in two-dimensions and retrieve it in three-dimensions. Several technical challenges of digital holographic systems have been overcome by proposing single-shot acquisition and common-path configurations. However, the limited fiel-of-view (FOV) of digital holography is the most fundamental and technically challenging aspect of this technology. With this in mind, we have developed a digital holographic microscope (DHM) with a doubled FOV together with it leverages single-shot acquisition, common-path, and off-axis configuration and operates in the reflection mode. The double FOV is achieved by spatial frequency multiplexing of two different areas of the object beam by the use of a cube beam splitter. The common-path and off-axis configuration are obtained by employing a plate beam splitter just before the microscope objective. Several experiments are carried out, and the results are presented to demonstrate the validity and effectiveness of the proposed DHM for quantitative phase imaging of (semi) transparent and reflective objects. Based on the experimental results, the proposed microscope shows advanced performance in biomedical imaging as well as inspection of engineered surfaces with its simplicity, higher stability (temporal and mechanical), compactness, low cost, and most importantly double FOV capabilities.

Improvement of Measurement Accuracy in Digital Holographic Microscopy by Using Dual-Wavelength Technique

Low Noisy Dual Wavelength Digital Holography and Application in the Ultra-precision Machining Surface Measurement

Single-exposure cepstrum phase-shifting in-line digital holography based on dual-CCD

Optical Acceleration Measurement Method with Large Non-ambiguity Range and High Resolution Via Synthetic Wavelength and Single Wavelength Superheterodyne Interferometry

Extension of Refocus Depth Range in Digital Holographic Microscopy.

Correction of Phase-Shifting Error in Wavelength Scanning Digital Holographic Microscopy

Analysis of Wavelength Error in Spectral Phase Shifting of Digital Holographic Microscopy

Phase unwrapping and range enlargement in phase-shifting dual wavelength digital holography

Method of Heterodyne Confocal Microscopy Measuring Big Step Height

Single-Shot 3D Topography of Transmissive and Reflective Samples with a Dual-Mode Telecentric-Based Digital Holographic Microscope

Layered phase restoration method for dual-wavelength digital holographic microscopy based on linear programming

Micro-vibration measuring technology based on heterodyne interference

A Novel Approach for Measurement of Free-Form Optical Elements with Digital Holographic Microscopy

Single-shot two-wavelength slightly-off-axis flipping digital holography using polarization-splitting modulation

Accurate Reconstruction in Measurement of Micro-Structures Using Digital Holographic Microscopy

Improving the Signal-to-Noise Ratio of Axial Displacement Measurements of Microspheres Based on Compound Digital Holography Microscopy Combined with the Reconstruction Centering Method

Step-height Measurement by Means of a Dual-Frequency Interferometric Confocal Microscope.

Dual Field-of-View Off-Axis Spatially Multiplexed Digital Holography Using Fresnel's Bi-Mirror

Double field-of-view single-shot common-path off-axis reflective digital holographic microscope

Equivalent Measurement and Real-Time Compensation of Error Caused by Intensity Change in Deep Sub-Nanometer Displacement Measuring Interferometry

Development of a Spatial Resolution-Enhanced Digital-Hologram Microscope With a Liquid Crystal Phase Modulator