Abstract:Utilizing a 2D MXene nanocoating on titanium surfaces grooved by laser surface texturing (LST) achieves a significant 70% reduction in the friction coefficient and minimal substrate wear. This strategic integration of LST with lubricative 2D material nanocoating delineates a groundbreaking methodology for substantially improving the tribological performance of metals, showcasing a cutting‐edge advancement in materials science applications. The inferior tribological properties of titanium (Ti) and its alloys, due to their limited work hardening capability and the mechanical instability of their oxide scale, pose substantive challenges in practical applications. Surface texturing and the application of 2D material coatings are acknowledged as efficacious strategies for enhancing these properties. Nevertheless, the rapid loss of effectiveness when employing these methods in isolation highlights a significant limitation. Herein, a 50‐nm‐thick MXene nanocoating is deposited onto groove‐textured pure Ti surface, effectuating a reduction in the coefficient of friction (COF) from ≈0.57 to 0.17, thereby substantially mitigating wear on the Ti substrate. The grooved surface architecture plays a vital role in storing MXenes and facilitating lubricant replenishment through the stirring effect of frictional stress during subsequent friction process. Further, the continuous decomposition and reorganization of MXene coating results in the formation of a robust tribofilm that resists oxidation and plastic deformation in the subsurface layer, markedly enhancing the friction and wear resistance. These findings are crucial for improving tribological performance in Ti and its alloys and provide a straightforward yet effective strategy for tailoring their tribological properties by integrating LST with 2D material nanocoating.

Nanotribological Properties of Nanotextured Ni-Co Coating Surface Measured with Afm Colloidal Probe Technique

Friction-reducing Micro/nanoprotrusions on Electrodeposited Ni–Co Alloy Coating Surface Fabricated by Laser Direct Writing

Electronic Controlling on Nanotribological Properties of a Textured Surface by Laser Processing

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Nanocoatings Tribology

Microtextures Induced by Nanosecond Laser on Ni–Co Alloy Coatings

Microstructure, Mechanical and Tribological Properties of NbN/Ni Coatings

Optimizing mechanical and tribological properties of electrodeposited NiCo alloy coatings by tailoring hierarchical nanostructures

Triobological Properties of Nanocrystalline Co-Ni Coating Produced by Pulse Electrodeposition

Alumina/GNPs coating on textured WC/Co substrate: microstructure and tribology

Tribological Properties of Nanocomposite Electroplated Coating of Nickel

Study on Preparation and Tribology Behaviors of Ni-P Electroless Deposited Nanocrystalline Coating

High-temperature tribological properties of AlCrN coatings deposited on textured surfaces under dry friction

A Comparative Study on the Tribological Behavior of Nanocrystalline Nickel and Cobalt Coatings Correlated with Grain Size and Phase Structure

Tailoring Tribological Characteristics in Titanium Alloys by Laser Surface Texturing and 2D Ti3C2Tx MXene Nanocoating

Fabrication And Tribological Behavior Of Ni-Zro(2) Nanocomposite Coatings Prepared By Electrodeposition In Ultrasonic Field

Study on the Adhesion and Tribological Behavior of PVD TiAlN Coatings with a Multi-Scale Textured Substrate Surface

On the Adhesive Strength Quantification and Tribological Performance of the Multilayered Fe–Ni Coating Fabricated by Electroplating

Tribological-behavior of electroless Ni-P-carbon nanotube comoposite coating

Surface textures fabricated by laser and ultrasonic rolling for improving tribological properties of TiAlSiN coatings

Effect of Number of Laser Pulses on Tribological Property of Textured-Coating