Abstract:In reinforced concrete design, seismic provisions outline three types of moment resisting frames for use in high, moderate, and low seismic regions. However, there has been no methodology for assessing the performance of these structures other than through observations from actual seismic events or physical testing. The Applied Technology Counsel (ATC) has developed the ATC-63 Methodology (now FEMA P695) for assessing the seismic performance of structures through mathematical simulation, which may be used to assess the performance of reinforced concrete frames. This study investigates the performance of reinforced-concrete intermediate moment frames (IMF) used in moderate seismic zones. In this study, a four-story and six-story IMF were designed; once using current American Concrete Institute (ACI) seismic provisions and again with the addition of a strong-column weak-beam ratio. The earthquake simulation and dynamic analysis software OpenSees was then used to model the frames and analyze their structural performance. The ATC-63 Methodology as outlined in FEMA P695: Quantification of Building Seismic Performance Factors was used to assess the performance, focusing namely on the IMF's median collapse capacity, in terms of spectral acceleration. Three major findings applicable to IMFs of the type and height modeled were produced from the study. First, the results indicate that the current IMF provisions of ACI-318 2008 do provide acceptable seismic performance. Second, the addition of a strong-column weak-beam ratio did not offer significant improvement over current provisions. Third, the study indicates a potential concern for shear failure occurring that the models would not detect. Further investigation is needed to address this concern. These results add insight into the design provisions for intermediate moment frames and contribute to the technical base for future criteria and study.

SIMPLIFIED SEISMIC PERFORMANCE EVALUATION OF REINFORCED CONCRETE FRAME BASED ON MODAL INCREMENTAL DYNAMIC ANALYSIS

Approximate MPA-based method for performing incremental dynamic analysis

Static and dynamic inelastic P -Δ effect for seismic design

SIMPLIFIED INCREMENTAL DYNAMIC ANALYSIS METHOD FOR UNIAXIAL PLAN-ASYMMETRIC STRUCTURES

Stochastic incremental dynamic analysis considering random system properties

An efficient framework for structural seismic collapse capacity assessment based on an equivalent SDOF system

Case Study on the Seismic Performance of Reinforced Concrete Intermediate Moment Frames Using ACI Design Provisions

Incremental Dynamic Analysis for Multi-storey Asymmetric Structures Subjected to Bi-directional Earthquake Motions

Incremental dynamic analysis and FEMA P695 seismic performance evaluation of a cold‐formed steel–framed building with gravity framing and architectural sheathing

Structural modal identification and MCMC-based model updating by a Bayesian approach

New method for solving capacity curve of rc structure based on simplified incremental dynamic analysis

Efficient Structural Seismic Performance Evaluation Method Using Improved Endurance Time Analysis

A Critical Evaluation of the Coefficient Method, Capacity Spectrum Method and Modal Pushover Analysis for Irregular Steel Buildings in Seismic Zones

Assessing the seismic behavior of steel moment frames equipped by elliptical brace through incremental dynamic analysis (IDA)

Seismic Performance Factors of RC Frames with Infilled Walls Based on APOA and IDA

OPTIMIZATION OF FAILURE MODES FOR REINFORCED CONCRETE BUILDINGS BASED ON IDA METHOD

A multi-modal-analysis-based simplified seismic design method for high-rise frame-steel plate shear wall dual structures

Evaluation of Performance and Storey Drift Ratio Limits of High-Rise Structural Systems with Separated Gravity and Lateral Load Resisting Systems Using Time History Analysis and Incremental Dynamic Analysis

Assessing seismic fragility on direct displacement-based designed RC frame considering SSI effect

Assessment of modal pushover analysis for mid-rise concrete buildings with and without viscous dampers

Assessing Seismic Fragility of Low-Rise RC Buildings by means of Incremental Dynamic Analysis (IDA)