Abstract:Under the influence of a strong adverse pressure gradient, secondary flow, and other factors, compressor cascades are prone to corner separation and even to corner stall, which seriously affects aerodynamic performance. In this paper, large eddy simulation is used to investigate the effects and mechanisms of corner stall controlled by the blended blade and end wall (BBEW) technique. Based on this technique, three BBEW control schemes with different chord-direction positions of the maximum BBEW width are designed for the suction side root of a modified NACA (National Advisory Committee for Aeronautics) 65 blade. The influence of the chord-direction position of the maximum BBEW width on control corner stall and the differences of physical mechanisms are deeply explored. The numerical results show that the BBEW technique can improve the flow field structure and aerodynamic performance of a compressor cascade under corner stall conditions to a certain extent. When the maximum BBEW width is located near the leading edge, it provides the most significant reduction in the spanwise height of corner separation and effectively weakens the intersection of boundary layers, so that the boundary layer losses are reduced by 6.27%, and the overall performance is improved. These effects can be attributed to the axial and spanwise forces generated near the maximum BBEW width, with the former increasing the kinetic energy of the surrounding fluid, while the latter transports low-energy fluid upward to reduce accumulation on the end wall. In addition, the increased dihedral angle weakens the intersection of boundary layers and restrains the development of the corner vortex, which is also one of the underlying physical mechanisms. When the maximum BBEW width is located in the middle of the chord, it most effectively delays the corner stall. When it is located near the trailing edge, it is most effective at controlling the development of corner separation, reducing the accumulation of low-energy fluid in the three-dimensional corner region, and reducing corner separation losses by 4.73%. The effect of the increased dihedral angle in weakening the intersection of boundary layers and the corner vortex is the main reason why these two design schemes can improve the aerodynamic performance of the compressor cascade.

Control of Corner Separation to Enhance Stability in a Linear Compressor Cascade by Boundary Layer Suction

Corner Stall Control in Linear Compressor Cascade by Blended Blade and Endwall Technique Based on Large Eddy Simulation

Combined Control Method and Mechanism Analysis for Corner Separation in a Compressor Cascade

Large Eddy Simulation and Combined Control of Corner Separation in a Compressor Cascade

Numerical Investigation on Corner Separation Control in a Linear Compressor Cascade by Synthetic Jet

Control Of Flow Separations In Compressor Cascade By Boundary Layer Suction Holes In Suction Surface

Experimental Study and Vortex Analysis in A Linear Compressor Cascade with Active Flow Control

Experimental Investigations Of Corner Stall In A Linear Compressor Cascade

Investigation on corner stall prediction and flow control by blended blade and end wall technology in a compressor cascade based on modified Spalart-Allmaras model

Experimental Study of Corner Stall in a Linear Compressor Cascade

A Study of Corner Separation in a Linear Compressor Cascade Based on SBES Model

Investigation on corner stall prediction and flow control by blended blade and endwall technology in a compressor cascade based on modified Spalart-Allmaras model

An Evaluation Strategy of Control Method for Corner Separation/Stall in Compressor Cascades

Numerical Investigation Of Corner Separation On Compressor Cascade

Effects of Boundary Layer Suction on the Flow Characteristic in a Highly-Loaded Compressor Cascade With Clearance

An Experimental Investigation of the Corner Separation Control in a Compressor Cascade Using Spatially Oscillating Jet

Effect of Combined Boundary Layer Suction on the Separation Control in a Highly Loaded Transonic Compressor Cascade

Effect investigation of single-slotted and double-slotted configurations on the corner separation and aerodynamic performance in a high-load compressor cascade

Control of Corner Separation with Plasma Actuation in A High-Speed Compressor Cascade

Numerical Study of Dual Sweeping Jet Actuators for Corner Separation Control in Compressor Cascade

An Investigation on Separation Configurations in Compressor Cascades with Boundary Layer Suction (BLS)