Abstract:The separation flow pattern in compressor corners is well known but its nature is not fully understood. In this paper, the numerical simulation based on hybrid LES/RANS was performed to improve our understanding about the unsteady separation structure and its dynamic mechanisms of compressor corner flows, subject to a range of incoming flow incidences. In the simulation, the attached boundary layer near the walls was modeled by RANS, while the large separated flows in the corner were resolved by LES. The simulation was carefully validated by the experimental data before flow physics investigation. The unsteady separation structures and its effects were then investigated step by step, from phenomena observation to mechanisms analysis. First, the overall separation behavior and its associated flow physics was visualized and analyzed. It was found that the unsteady separation structure was distinct from the steady view. Some additional vortex structures, normally smeared out in the steady averaging process, were crucial in the unsteady dynamic process. These small but critical vortices corresponded to large intermittency in the separation size and strength. As the incidences increased, the vortex structure became much more complex due to the enhanced interaction of these vortices. Second, the turbulence behavior was examined in the separated regions. Anisotropy and non-equilibrium of turbulence were found to be dominant in the separation region due to non-homogenous shear of the separated flow. It posed a big challenge for conventional RANS prediction. Finally, the unsteadiness of corner separated flows was fully analyzed over a range of incidences. It was found that the unsteadiness came from two sources: the suction side separation and the wake shedding. The unsteadiness increased with the incidences. The two unsteady sources interacted with each other at high incidences, which led to a big unsteady resonance structure near the blade trailing edge. The resonance was responsible for a large pressure variation, implying the enhanced noise generation near the blade trailing edge.

A Study of Corner Separation in a Linear Compressor Cascade Based on SBES Model

Numerical Investigation of Intermittent Corner Separation in a Linear Compressor Cascade

Unsteady Flow Structure of Corner Separation in a Highly Loaded Compressor Cascade

Flow mechanism of bimodal phenomenon in intermittent corner separation in a linear compressor cascade using a hybrid RANS/LES method

Unsteady Mechanisms Of Compressor Corner Separation Over A Range Of Incidences Based On Hybrid Les/Rans

Large-eddy Simulation of 3-D Corner Separation in a Linear Compressor Cascade

Investigation of Vortical Structures and Turbulence Characteristics in Corner Separation in a Linear Compressor Cascade Using DDES

Turbulence characteristics in corner separation in a highly loaded linear compressor cascade

Effect on corner separation control for high load compressor cascade with different end-wall BLS position

Numerical Analysis of Three-Dimensional Corner Separation in A Linear Compressor Cascade

Numerical Study of Corner Separation in a Linear Compressor Cascade Using Various Turbulence Models

Vortical Characteristics of the Corner Separation Flow in a High-Speed Compressor Cascade

Numerical Investigation Of Corner Separation On Compressor Cascade

Investigation of Corner Separation in A Linear Compressor Cascade Using Ddes

Research progress of corner separation in axial-flow compressor

Numerical Investigation on Corner Separation Control in a Linear Compressor Cascade by Synthetic Jet

Numerical Study of the Effect of Secondary Vortex on Three-Dimensional Corner Separation in a Compressor Cascade

Numerical Investigation of Corner Separation Flow Using Spalart-Allmaras Model with Various Modifications

Unsteady Flow Mechanism of Corner Separation Control Using Blade End Slots in a Highly Loaded Compressor Cascade

Investigation on corner stall prediction and flow control by blended blade and endwall technology in a compressor cascade based on modified Spalart-Allmaras model

Corner Separation Control by Boundary Layer Suction Applied to a Highly Loaded Axial Compressor Cascade