Abstract:The interdigital transducer (IDT) of the traditional Mach-Zehnder (MZ) acousto-optic modulator on a silicon-oninsulator (SOI) platform is located outside its two arms. The crest and trough of the surface acoustic wave (SAW) are used to modulate the two arms of the MZ interferometer so as to achieve a high modulation efficiency. Therefore, the distance between the two arms must be odd multiples of half acoustic wavelength. However, since the substrate is usually not uniform, the wavelength of the SAW changes as it transmits through the surface of the device. As a result, the exact distance between the two arms is difficult to choose. On the other hand, the SAW losses a portion of energy after passing through the first arm of the MZ interferometer, so the modulation of the second arm becomes much weaker. To solve these problems, we propose a new structure where its IDT is situated in the middle of the two arms of the MZ interferometer. With this scheme, the two arms of the MZ interferometer are located exactly at the crest and the trough of the SAW, while they are modulated with equal strength. In this paper, we first use the finite element method to simulate the acoustic frequency and the surface displacement of the excited SAW. Then we deduce the refractive index variations of all layers according to their acousto-optic effects. After that, we analyze the influences of different factors on the acousto-optic modulation efficiency, including the type and size of waveguide, the thickness of zinc oxide (ZnO) layer, and the area it covers, the number of electrodes, etc. These parameters are accordingly optimized to enhance the modulation efficiency. Modeling result based on COMSOL Multiphysics indicates that when the width of the strip waveguide is 6 mu m, the ZnO layer covers only the area under the IDT and has a thickness of 2.2 mu m, and the number of the electrodes is 50, the effective refractive index variation of the waveguide reaches 4.08 x 10(-4) provided that the amplitude of the driving voltage is 1 V. This value is 12% higher than that of the traditional structure.

Studies on the Operating Characteristics of Anisotropic Acousto-Optic Device with Multi-Transducers

An improved Mach-Zehnder acousto-optic modulator on a silicon-on-insulator platform

Research of the Beam Steering Theory Based on Acousto-optic Effect

Improving Diffraction Efficiency of DOE in Wide Waveband Application by Multilayer Micro-Structure

Research on the Broadband Operating Mode of Anisotropic Acousto-Optic Deflector Using Tellurium Dioxide Crystal

The Wideband Design of Anisotropic Acousto-Optic Deflector under Different Frequency Bands

Broadband Controllable Acoustic Focusing and Asymmetric Focusing by Acoustic Metamaterials

Investigation of acousto-optic interaction with momentum mismatching considering acoustic anisotropy in birefringent crystal

Optimization of Asymmetric Orthomode Transducer at Terahertz Frequency

Numerical investigation on the effect of structure parameter of acoustic field rotator on its operating bandwidth

Aluminum Nitride Thin Film Acousto-Optic Modulator based on Single-Phase Unidirectional Transducers

Optical Routing via High Efficiency Composite Acoustic Diffraction

Anisotropic Acoustodynamics in Gigahertz Piezoelectric Ultrasonic Transducers

The research of acousto-optic switch device for telecommunication

3D focusing acoustic lens optimization method using multi-factor and multi-level orthogonal test designing theory

Spatial-Dependent Spectral Response of Acousto-Optic Tunable Filters with Inhomogeneous Acoustic Distribution

DIFFRACTION CHARACTERISTIC OF ACOUSTO-OPTIC Q-SWITCH IN DPL

The experimental study on characteristics of the 2.05 μm all-fiber acousto-optic frequency shifter

Feasibility of Non-Collinear TeO 2 Acoustic-Optic Tunable Filters Used in the Optical Communication

Investigation of a Multi-Element Focused Air-Coupled Transducer

Collaborative optimization of phase and amplitude of composite signals for acousto-optic beam splitting technology