Abstract:The interdigital transducer (IDT) of the traditional Mach-Zehnder (MZ) acousto-optic modulator on a silicon-oninsulator (SOI) platform is located outside its two arms. The crest and trough of the surface acoustic wave (SAW) are used to modulate the two arms of the MZ interferometer so as to achieve a high modulation efficiency. Therefore, the distance between the two arms must be odd multiples of half acoustic wavelength. However, since the substrate is usually not uniform, the wavelength of the SAW changes as it transmits through the surface of the device. As a result, the exact distance between the two arms is difficult to choose. On the other hand, the SAW losses a portion of energy after passing through the first arm of the MZ interferometer, so the modulation of the second arm becomes much weaker. To solve these problems, we propose a new structure where its IDT is situated in the middle of the two arms of the MZ interferometer. With this scheme, the two arms of the MZ interferometer are located exactly at the crest and the trough of the SAW, while they are modulated with equal strength. In this paper, we first use the finite element method to simulate the acoustic frequency and the surface displacement of the excited SAW. Then we deduce the refractive index variations of all layers according to their acousto-optic effects. After that, we analyze the influences of different factors on the acousto-optic modulation efficiency, including the type and size of waveguide, the thickness of zinc oxide (ZnO) layer, and the area it covers, the number of electrodes, etc. These parameters are accordingly optimized to enhance the modulation efficiency. Modeling result based on COMSOL Multiphysics indicates that when the width of the strip waveguide is 6 mu m, the ZnO layer covers only the area under the IDT and has a thickness of 2.2 mu m, and the number of the electrodes is 50, the effective refractive index variation of the waveguide reaches 4.08 x 10(-4) provided that the amplitude of the driving voltage is 1 V. This value is 12% higher than that of the traditional structure.

Aluminum Nitride Thin Film Acousto-Optic Modulator based on Single-Phase Unidirectional Transducers

High-Performance Electro-Optic Modulator on Silicon Nitride Platform with Heterogeneous Integration of Lithium Niobate

An improved Mach-Zehnder acousto-optic modulator on a silicon-on-insulator platform

Wideband, Efficient AlScN-Si Acousto-Optic Modulator in a Commercially Available Silicon Photonics Process

Highly efficient acousto-optic modulation using nonsuspended thin-film lithium niobate-chalcogenide hybrid waveguides

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Hybrid thin-film lithium niobate micro-ring acousto-optic modulator for microwave-to-optical conversion

Acousto‐Optic Modulation in Silicon Waveguides Based on Piezoelectric Aluminum Scandium Nitride Film

Integrated waveguide-based acousto-optic modulation with near-unity conversion efficiency

Design of Mid-Infrared Electro-Optic Modulators Based on Aluminum Nitride Waveguides

Cavity-enhanced acousto-optic modulators on polymer-loaded lithium niobate integrated platform

High Efficiency Single-Sideband Modulator Using Coupled Bragg Grating Resonators on Thin-Film Lithium Niobate

Ultra-high Efficiency Electro-optic Modulator on Thin-film Lithium Niobate

Composite Acousto-Optical Modulation

Acousto-optic modulation based on an AlScN microring resonator for microwave-to-optical conversion

Optical Routing via High Efficiency Composite Acoustic Diffraction

Silicon-integrated scandium-doped aluminum nitride electro-optic modulator

Superconducting Acousto-optic Phase Modulator

Progress of Thin-Film Lithium Niobate Acousto-Optic Modulators(Invited)

On-chip silicon electro-optical modulator with ultra-high extinction ratio for fiber-optic distributed acoustic sensing

Aluminum Nitride Electro-optic Modulator at Mid-IR Wavelengths