Abstract:The interdigital transducer (IDT) of the traditional Mach-Zehnder (MZ) acousto-optic modulator on a silicon-oninsulator (SOI) platform is located outside its two arms. The crest and trough of the surface acoustic wave (SAW) are used to modulate the two arms of the MZ interferometer so as to achieve a high modulation efficiency. Therefore, the distance between the two arms must be odd multiples of half acoustic wavelength. However, since the substrate is usually not uniform, the wavelength of the SAW changes as it transmits through the surface of the device. As a result, the exact distance between the two arms is difficult to choose. On the other hand, the SAW losses a portion of energy after passing through the first arm of the MZ interferometer, so the modulation of the second arm becomes much weaker. To solve these problems, we propose a new structure where its IDT is situated in the middle of the two arms of the MZ interferometer. With this scheme, the two arms of the MZ interferometer are located exactly at the crest and the trough of the SAW, while they are modulated with equal strength. In this paper, we first use the finite element method to simulate the acoustic frequency and the surface displacement of the excited SAW. Then we deduce the refractive index variations of all layers according to their acousto-optic effects. After that, we analyze the influences of different factors on the acousto-optic modulation efficiency, including the type and size of waveguide, the thickness of zinc oxide (ZnO) layer, and the area it covers, the number of electrodes, etc. These parameters are accordingly optimized to enhance the modulation efficiency. Modeling result based on COMSOL Multiphysics indicates that when the width of the strip waveguide is 6 mu m, the ZnO layer covers only the area under the IDT and has a thickness of 2.2 mu m, and the number of the electrodes is 50, the effective refractive index variation of the waveguide reaches 4.08 x 10(-4) provided that the amplitude of the driving voltage is 1 V. This value is 12% higher than that of the traditional structure.

Superconducting Acousto-optic Phase Modulator

An improved Mach-Zehnder acousto-optic modulator on a silicon-on-insulator platform

Highly efficient acousto-optic modulation using nonsuspended thin-film lithium niobate-chalcogenide hybrid waveguides

On-chip 7 GHz acousto-optic modulators for visible wavelengths

Hybrid thin-film lithium niobate micro-ring acousto-optic modulator for microwave-to-optical conversion

Ultra-high Efficiency Electro-optic Modulator on Thin-film Lithium Niobate

Cryogenic electro-optic modulation in titanium in-diffused lithium niobate waveguides

Ultra-compact Thin Film Lithium Niobate Electro-optic Modulator with Metal-filled Photonic Crystal Waveguide

Ultracompact Electrooptic Silicon Modulator With Horizontal Photonic Crystal Slotted Slab

High Efficiency Single-Sideband Modulator Using Coupled Bragg Grating Resonators on Thin-Film Lithium Niobate

High-efficiency Thin-Film Lithium Niobate Modulator with Highly Confined Optical Modes

Wideband Thin-Film Lithium Niobate Modulator with Low Half-Wave-voltage Length Product

Analysis of Electrooptic Modulator With 1-D Slotted Photonic Crystal Nanobeam Cavity

High-efficiency Electro-Optic Modulators in Lithium Niobate on Insulator

Y-Z cut lithium niobate longitudinal piezoelectric resonant photoelastic modulator

Integrated lithium niobate intensity modulator on a silicon handle with slow-wave electrodes

Ultra-high extinction dual-output thin-film lithium niobate intensity modulator

Compact low-half-wave-voltage thin film lithium niobate electro-optic phase modulator fabricated by photolithography assisted chemo-mechanical etching

Integrated microwave acousto-optic frequency shifter on thin-film lithium niobate

Integrated waveguide-based acousto-optic modulation with near-unity conversion efficiency

Submilliwatt Silicon Nitride Thermo-Optic Modulator Operating at 532 nm