Abstract:The reactive extrusion of maleic anhydride grafted polypropylene (PP-g-MAH) with ethylenediamine (EDA) as coupling agent was carried out in a co-rotating twin-screw extruder to produce long chain branched polypropylene (LCBPP). Part of PP-g-MAH was replaced by maleic anhydride grafted high-density polyethylene (HDPE-g-MAH) or linear low-density polyethylene (LLDPE-g-MAH) to obtain hybrid long chain branched (LCB) polymers. Compared with the linear PP, PE and their blends, the LCB polyolefins exhibit excellent dynamic shear and transient extensional rheological characteristics such as increased dynamic modulus, higher low-frequency complex viscosity, significantly enhanced melt strength and strain-hardening behaviors. LCB polymers also have higher tensile strength, tensile modulus, impact strength and lower elongation at break than linear polymer and their blends. Supercritical carbon dioxide (scCO2) was introduced in the reactive extrusion process. With the presence of scCO 2, the motor current of twin extruder was decreased and LCB polyolefins with lower MFR, higher complex viscosity and increased tensile strength and modulus were obtained. This indicates that the application of scCO2 can reduce the viscosity of melt in extruder, enhance the diffusion of reactive species, facilitate the reaction between functional groups, and increase the LCB density. The foaming behavior of both linear and LCB polyolefins were studied. The results show that cellular materials produced from the LCB polyolefins have higher weight reduction, smaller cell size and better mechanical properties than those produced from the linear polymers.

Novel Method for Preparation of Polypropylene Blends with High Melt Strength by Reactive Compounding

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

Improved melting strength of polypropylene by reactive compounding with ultrafine full-vulcanized polybutadiene rubber (UFBR) particles

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Preparation, structure and properties of dynamically vulcanized polypropylene/acrylonitrile butadiene rubber/zinc dimethacrylate ternary blend composites containing maleic anhydride grafted polypropylene

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Effect Of Interfacial Enhancing On Morphology, Mechanical, And Rheological Properties Of Polypropylene-Ground Tire Rubber Powder Blends

A New Method for Preparing Anhydride Grafted Polypropylene with High Grafting Ratio by Combining Microwave Reaction and Reactive Extrusion

Study on NBR/PP Blend Compatiblized by TETA/MP/XNBR

Study of polypropylene/polyethylene terephthalate blends compatibilized with polypropylene double‐grafted maleic anhydride and epoxy resin

Polyamide Reinforced Epdm Compatibilized with Maleic Anhydride Grafted Ethylene-Propylene-Diene Rubber

Polymer Blends of Pbt and Pp Compatibilized by Epoxidized Ethylene Propylene Diene Rubber

A Novel Strategy for the Preparation of Reactively Compatibilized Polymer Blends with Oligomers Containing Α‐methyl Styrene Units

Blending In Situ Polyurethane-Urea With Different Kinds Of Rubber: Performance And Compatibility Aspects

Dynamic rheological behavior, crystallization and friction performance of ultrahigh molecular weight polyethylene/polypropylene blends by multi-step melt processing strategy

Preparation and Characterization of Nitrile Butadiene Rubber (NBR)/Polyoxymethlene (POM) Blends Compatibilized by Maleic Anhydride Grafted POM (MAH-g-POM)

Novel Rubber Blends Made from Ultra-Fine Full-Vulcanized Powdered Rubber (UFPR)

Improvement of the mechanical property and thermal stability of polypropylene/recycled rubber composite by chemical modification and physical blending

Preparation and Properties of LLDPE/PMVS Blends

Compatibilization And Toughening Of Immiscible Ternary Blends Of Polyamide 6, Polypropylene (Or A Propylene-Ethylene Copolymer), And Polystyrene

Compatibilization Effect of PP-g-(MAH/VAc) on Polypropylene/Polyamide 6 Blends