Abstract:Solid oxide fuel cell (SOFC) has experienced a growing interest in the last few decades because of generating energy more efficiently than the conventional combustion of fossil fuels. By using the same material as anode and cathode of symmetric solid oxide fuel cell (SSOFC), the production of reliable and repeatable cells would be simpler. In this work, La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN) has been investigated firstly as potential cathode material for SOFC. The cathode polarization resistances are only 0.1 Ω cm2 at 800 oC. The stability of phase structure, electrode microstructure and polarization resistances for the LSCFN in the atmosphere of air have been studied. Then, LSCFN have been investigated as potential anode material for SOFC. The results show that LSCFN have high catalytic activity in methane catalytic combustion reaction, the total conversion temperature of 1% CH4 using LSCFN as catalyst was as low as 650 oC. The performance of carbon-resistance and sulfur-tolerance in SOFC were studied using LSCFN ceramic anode with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) electrolyte. Long-term operation of such single cell under methane lasted for 120 hours without degradation. The output power density fueled with H2-50 ppm H2S was stable enough in 120 hours’ operation which indicated a good sulfur-tolerant performance. Finally, the maximum power densities generated by the SSOFC cell with LSCFN electrode are 650 mW cm-2 in H2, and the cell maximum power output has demonstrated to be not affected by the redox cycling of the anode during a total of 21 cyclic testing, indicating that the LSCFN has excellent redox stability. All of these results indicate that LSCFN can potentially be a promising candidate for the electrode material of SSOFC.

Investigation of novel anode NiO-La0.3Ce0.7O2-delta of IT-SOFC with LSGM-based electrolyte

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Investigation of NiO-La0.30Ce0.70O2-δ novel anode of IT-SOFC with LaGaO3-based electrolyte

A Novel La2NiO4+δ-La3Ni2O7-δ-Ce0.55La0.45O2-δ Ternary Composite Cathode Prepared by the Co-Synthesis Method for IT-SOFCs

Improved Electrochemical Performance of NiO–La0.45Ce0.55O2−δ Composite Anodes for IT-SOFC Through the Introduction of a La0.45Ce0.55O2−δ Interlayer

Thermochemical Compatibility and Polarization Behaviors of La0.8Sr0.2Co0.8Ni0.2O3−δ As a Cathode Material for Solid Oxide Fuel Cell

Preparation of La0.45Ce0.55O2-δ Anode Interlayer Film for IT-SOFC

Preparation of La0.45Ce0.55O2-delta,5 anode interlayer film for IT-SOFC

Electrochemical performance of La2NiO4+δ-Ce0.55La0.45O2−δ as a promising bifunctional oxygen electrode for reversible solid oxide cells

Preparation and electrochemical characterization of Sr- and Mn-doped LaGaO 3 as anode materials for LSGM-based SOFCs

Enhanced Electrochemical Performance of Solution Impregnated La0.8Sr0.2Co0.8Ni0.2O3−δ Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Study on the properties of NiO/Ce0.7La0.3O1.85 composite anode material for IT-SOFC

Enhanced Electrochemical Performance of Co-Synthesized La2NiO4+δ-Ce0.55La0.45O2-δ Composite Cathode for IT-SOFCs

Nb-doped La0.6Sr0.4FeO3−δ as an electrolyte for intermediate-temperature solid oxide fuel cells

Coking-Resistance and Sulfur-Tolerance Study of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ Anode

Conducting Property and Performance Evaluation of LNF As Cathode Current Contact Layer in Solid Oxide Fuel Cell

Electrical and Electrochemical Performances Evaluation of LaNi<sub>0.6</sub>Fe<sub>0.4</sub>O<sub>3</sub> Cathode Contact and Current Collecting Layer in SOFCs

Preparation and Performance of Anode-supported LaGaO<SUB>3</SUB>-based Electrolyte Solid Oxide Fuel Cells with Sm-doped CeO<SUB>2</SUB> Buffer Layers

High Performance Ferrite–based Anode La0.5Sr0.5Fe0.9Mo0.1O3–δ for Intermediate–temperature Solid Oxide Fuel Cell

La0.8Sr1.2CoO4+δ–CGO Composite As Cathode on La0.9Sr0.1Ga0.8Mg0.2O3−δ Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte