Abstract:Objective:Montmorillonite has a good property of cation exchanging and adsorbing.According to purified montmorillonite properties,modified samples were prepared by using NH4 Cl and Hexadecyl trimethyl ammonium Bromide (CTAB)to exchanging the interlayer cation,respectively.Subsequently,the modified montmorillonites were used to adsorb Cr3+ ions in the chromium sulfate solution. Then,the obtained chromium bearing montmorillonites were analyzed and tested.The techniques of testing include powder X-ray diffractometry (XRD), Electron Paramagnetic Resonance (EPR)spectrometry and Frourie Transform Infrared (FTIR)spectrometry.The chemical analysis of residual solution show that the CTAB effectively closed the interlayer region of montmorillonite and hindered the Cr3+to occupy this region.However,the Cr3+exchange occurred in NH+4 -montmorillonite and purified montmorillonite.Samples before and after the adsorption of FTIR spectra had significant changes occurred, These suggested that extending to the lower bands in the region of silanol and aluminols in the FTIR spectra resulted from the adsorption mainly occurred in hexagonal cavities of TOT sheets.EPR results also suggested that even a small amount of octahedrons or tetrahedrons. Methods:We used purified montmorillonites and modified montmorillonites to adsorb Cr3++ions in the chromium sulfate solution(0.1mol/L),modified samples were prepared by using NH4Cl and Hexadecyl trimethyl ammonium Bromide (CTAB)to exchanging the interlayer cation.The techniques of testing include powder X-ray diffractometry (XRD),Electron Paramagnetic Resonance (EPR)spectrometry and Frourie Transform Infrared (FTIR)spectrometry were used to study the obtained chromium bearing montmorillonites. Results:The results show before Cr-adorbsorption,the CTAB and NH+4 ions were used to exchange the interlayer cations and the 001 diffraction line shifts from 1.54nm to 2.28 and 1.25nm,respectively.After Cr-absorption,001 reflection of no exchanged and NH4+-exchanged to 1.55nm,the one of CTAB-exchanged kept stead at 2.28 nm.These may suggest that the Cr3+can not exchange the CTAB and may be present the surface of the montmorillonite grains or into the hexagonal cavities of TOT sheets.In first derivative EPR spectra,the intensity of peak centered at g=2.00 increased with the amount of Cr-adsorbed at room temperature.Very slight increase for Cr—CTAB-M and one weak peak at g=1 .98 in second derivative spectra,huge increase for Cr-M and Cr—NH+4 -M.It may suggest that the g =1.97 peak resulted from the [Cr(6H2O)]3+ions in interlayer space or Cr3+in octahedral sheets. Conclusions:Heating can impulse the Cr3+entering the hexagonal cavities and then octahedral sites.Cr3+can exchange the interlayer NH+4 ions,but cannot exchange the CTAB ions.Hence,the CTAB cations protected the interlay regions when the Cr3+adsorbing.It encouraged the Cr3+enter into either hexagonal cavities or octahedral sites.

Adsorption of Cr(Vi) from Aqueous Solutions on Organic Modified Laponite

Cetyltrimethylammonium Bromide-Modified Laponite@Diatomite Composites for Enhanced Adsorption Performance of Organic Pollutants

Comparison and discussion on the adsorption capacity of several compounds with layered structure

CTAB-surface-functionalized magnetic MOF@MOF composite adsorbent for Cr(VI) efficient removal from aqueous solution

Highly efficient adsorption of Cr(VI) from aqueous solutions by amino-functionalized titanate nanotubes

Adsorptive Removal of Cr(VI) from Aqueous Solutions with an Effective Adsorbent: Cross-Linked Chitosan/montmorillonite Nanocomposites in the Presence of Hydroxy-Aluminum Oligomeric Cations.

The Study of Adsorbing Site in Cr3+-bearing Montmorillonite---Based on the Purified,CTAB-and NH+4 -Exchanging the Interlayer Cation Ones

Facile synthesis of poly(tannic acid-1,4-butanediamine) microsphere based on the "self-assembly to polymerization" mechanism and its fast removal feature toward Cr(VI) ions

Removal of Cr(III) Using Humic Acid–Modified Attapulgite

Cr(VI) Adsorption by Montmorillonite Nanocomposites

Preparation, Characterization, Adsorption Kinetics and Thermodynamics of Chitosan Adsorbent Grafted with a Hyperbranched Polymer Designed for Cr(VI) Removal

Synthesis of Ordered Large-Pore Mesoporous Carbon for Cr(Vi) Adsorption

Removal of Arsenate and Chromate by Lanthanum-modified Granular Ceramic Material: The Critical Role of Coating Temperature

Novel montmorillonite/jute composites functionalized with polyethyleneimine and cetyltrimethylammonium bromide for Cr(VI) adsorption

Removal of Cr(VI) from aqueous solution by macroporous resin adsorption

Simultaneous Removal of Cr(Ⅵ) and Cr(Ⅲ) by Titanate Nanosheets Through Photocatalysis Combined with Adsorption

Absorption of Cr(VI) onto amino-modified titanate nanotubes using 2-bromoethylamine hydrobromide through SN2 reaction.

Investigation of Chromium (III) Adsorption on Acid-Treated Bentonite Evaluation of Kinetic/Thermodynamic Data

Synthesis of Amino-protected Chitosan by Tripolyphosphate and Epichlorohydrin Modification: Cr(VI) Adsorption and Reaction Mechanism

The Preparation of a Lignosulfonate/Chitosan–Graphene Oxide Hydrogel Biosorbent to Effectively Remove Cr(VI) from Wastewater: Adsorption Performance and Mechanisms

Study on adsorption of chromium(VI) from aqueous solutions by poly(aniline-co-2,4-diaminophenol)