Abstract:Objective:Montmorillonite has a good property of cation exchanging and adsorbing.According to purified montmorillonite properties,modified samples were prepared by using NH4 Cl and Hexadecyl trimethyl ammonium Bromide (CTAB)to exchanging the interlayer cation,respectively.Subsequently,the modified montmorillonites were used to adsorb Cr3+ ions in the chromium sulfate solution. Then,the obtained chromium bearing montmorillonites were analyzed and tested.The techniques of testing include powder X-ray diffractometry (XRD), Electron Paramagnetic Resonance (EPR)spectrometry and Frourie Transform Infrared (FTIR)spectrometry.The chemical analysis of residual solution show that the CTAB effectively closed the interlayer region of montmorillonite and hindered the Cr3+to occupy this region.However,the Cr3+exchange occurred in NH+4 -montmorillonite and purified montmorillonite.Samples before and after the adsorption of FTIR spectra had significant changes occurred, These suggested that extending to the lower bands in the region of silanol and aluminols in the FTIR spectra resulted from the adsorption mainly occurred in hexagonal cavities of TOT sheets.EPR results also suggested that even a small amount of octahedrons or tetrahedrons. Methods:We used purified montmorillonites and modified montmorillonites to adsorb Cr3++ions in the chromium sulfate solution(0.1mol/L),modified samples were prepared by using NH4Cl and Hexadecyl trimethyl ammonium Bromide (CTAB)to exchanging the interlayer cation.The techniques of testing include powder X-ray diffractometry (XRD),Electron Paramagnetic Resonance (EPR)spectrometry and Frourie Transform Infrared (FTIR)spectrometry were used to study the obtained chromium bearing montmorillonites. Results:The results show before Cr-adorbsorption,the CTAB and NH+4 ions were used to exchange the interlayer cations and the 001 diffraction line shifts from 1.54nm to 2.28 and 1.25nm,respectively.After Cr-absorption,001 reflection of no exchanged and NH4+-exchanged to 1.55nm,the one of CTAB-exchanged kept stead at 2.28 nm.These may suggest that the Cr3+can not exchange the CTAB and may be present the surface of the montmorillonite grains or into the hexagonal cavities of TOT sheets.In first derivative EPR spectra,the intensity of peak centered at g=2.00 increased with the amount of Cr-adsorbed at room temperature.Very slight increase for Cr—CTAB-M and one weak peak at g=1 .98 in second derivative spectra,huge increase for Cr-M and Cr—NH+4 -M.It may suggest that the g =1.97 peak resulted from the [Cr(6H2O)]3+ions in interlayer space or Cr3+in octahedral sheets. Conclusions:Heating can impulse the Cr3+entering the hexagonal cavities and then octahedral sites.Cr3+can exchange the interlayer NH+4 ions,but cannot exchange the CTAB ions.Hence,the CTAB cations protected the interlay regions when the Cr3+adsorbing.It encouraged the Cr3+enter into either hexagonal cavities or octahedral sites.

Cr(VI) Adsorption by Montmorillonite Nanocomposites

Carbon-coated Montmorillonite Nanocomposite for the Removal of Chromium(vi) from Aqueous Solutions.

Adsorptive Removal of Cr(VI) from Aqueous Solutions with an Effective Adsorbent: Cross-Linked Chitosan/montmorillonite Nanocomposites in the Presence of Hydroxy-Aluminum Oligomeric Cations.

Hydrothermal carbonization synthesis of a novel montmorillonite supported carbon nanosphere adsorbent for removal of Cr (VI) from waste water

Synthesis and characterization of magnetic organic montmorillonite: efficient adsorption of hexavalent chromium

Novel montmorillonite/jute composites functionalized with polyethyleneimine and cetyltrimethylammonium bromide for Cr(VI) adsorption

Comparison and discussion on the adsorption capacity of several compounds with layered structure

Influence of Environmental Factors on Hexavalent Chromium Removal from Aqueous Solutions by Nano-Adsorbent Composites

A composite adsorbent of superparamagnetic nanoparticles with sludge biomass derived activated carbon for the removal of chromium (VI)

Cellulose hydrogel coated nanometer zero-valent iron intercalated montmorillonite (CH-MMT-nFe0) for enhanced reductive removal of Cr(VI): Characterization, performance, and mechanisms

Thiourea crosslinked-amino modified graphene nanoflakes as an effective adsorbent to confine Cr(VI) via multiple combination mechanisms

Effective adsorptive uptake of hexavalent chromium ions from aqueous systems utilizing a superior activated nanobentonite@cobalt ferrite@carboxymethylcellulose nanocomposite

The Study of Adsorbing Site in Cr3+-bearing Montmorillonite---Based on the Purified,CTAB-and NH+4 -Exchanging the Interlayer Cation Ones

CTAB-surface-functionalized magnetic MOF@MOF composite adsorbent for Cr(VI) efficient removal from aqueous solution

Impregnated Activated Carbons with Binary Oxides of Iron-Manganese for Efficient Cr(VI) Removal from Water

Preparation of Composite Porous Hydrogel Montmorillonite/Humic Acid/Polyvinyl Alcohol@Polypyrrole Based on Pickering Emulsion Template Method for Enhancing Hexavalent Chromium Ions Adsorption from Aqueous Solution

Amino-Functionalized Silica@Resorcinol-Formaldehyde Nanocomposites for the Removal of Cr(VI) from Aqueous Solutions

Adsorption and DFT investigations of Cr(VI) removal using nanocrystals decorated with graphene oxide

Removal of Cr(VI) from aqueous solution by macroporous resin adsorption

Enhanced removal of hexavalent chromium from aqueous solution by functional polymer-wrapped gamma-alumina composite adsorbent

Montmorillonite clay decorated with Al-Mg LDH as a strong and retrievable nanocomposite for decontamination of wastewater containing chromium(VI) and arsenic(III) toxic ions