Abstract:Direct-ink-writing (DIW)-based 3D-printing technology combined with the direct-foaming method provides a new strategy for the fabrication of porous materials. We herein report a novel method of preparing porous SiC ceramics using the DIW process and investigate their mechanical and wave absorption properties. We investigated the effects of nozzle diameter on the macroscopic shape and microstructure of the DIW SiC green bodies. Subsequently, the influences of the sintering temperature on the mechanical properties and electromagnetic (EM) wave absorption performance of the final porous SiC-sintered ceramics were also studied. The results showed that the nozzle diameter played an important role in maintaining the structure of the SiC green part. The printed products contained large amounts of closed pores with diameters of approximately 100–200 μm. As the sintering temperature increased, the porosity of porous SiC-sintered ceramics decreased while the compressive strength increased. The maximum open porosity and compressive strength were 65.4% and 7.9 MPa, respectively. The minimum reflection loss (RL) was −48.9 dB, and the maximum effective absorption bandwidth (EAB) value was 3.7 GHz. Notably, porous SiC ceramics after sintering at 1650 °C could meet the application requirements with a compressive strength of 7.9 MPa, a minimum RL of −27.1 dB, and an EAB value of 3.4 GHz. This study demonstrated the potential of direct foaming combined with DIW-based 3D printing to prepare porous SiC ceramics for high strength and excellent EM wave absorption applications.

Fabrication and performance of SiO2-based electromagnetic wave penetrating foamed ceramics with dense surface

Preparation and Performance of Electromagnetic Wave Absorbing Foamed Ceramics with High Closed Porosity and Gradient SiC Distribution

Lightweight and Resilient SiOC/SiC Foam with Efficient Electromagnetic Wave Absorption and High‐temperature Stability

Fabrication and properties of Si2N2O ceramics for microwave sintering furnace

Microstructures, Mechanical Properties and Electromagnetic Wave Absorption Performance of Porous SiC Ceramics by Direct Foaming Combined with Direct-Ink-Writing-Based 3D Printing

Fabrication And Properties Of Porous Si3n4-Sio2 Ceramics With Dense Surface And Gradient Pore Distribution

Properties of porous Si3N4 ceramic electromagnetic wave transparent materials prepared by technique combining freeze drying and oxidation sintering

Design and Performance of Lightweight High–temperature Resistant Microwave Penetrating Foamed Ceramics

Formation of closed pore structure in CaO-MgO-Al2O3-SiO2 (CMAS) porous glass-ceramics via Fe2O3 modified foaming for thermal insulation

Mechanical and Dielectric Properties of Porous Si3n4-Sio2 Composite Ceramics

Significantly toughened SiC foams with enhanced microwave absorption via in situ growth of Si3N4 nanowires

Fabrication of foamed ceramics with enhanced compressive strength and low thermal conductivity via a simple route

Porous SiC/melamine-derived carbon foam frameworks with excellent electromagnetic wave absorbing capacity

Ultralight Α–Si3n4w/Sic Foam Ceramics with Superior Microwave Absorption Performance in X- and Ku-Bands

Preparation, microstructure, properties and foaming mechanism of a foamed ceramics with high closed porosity

Ultralight α–Si 3 N 4 w/SiC foam ceramics with superior microwave absorption performance in X- and Ku-bands

RESEARCH ON HIGH-EFFICIENT THERMAL INSULATION CERAMIC MATERIALS

Mechanical and dielectric properties of porous and wave-transparent Si3N4-Si3N4 composite ceramics fabricated by 3D printing combined with chemical vapor infiltration

A Novel Method of Strong and Tough Si3N4 Ceramic from the Particle‐stabilized Foam

Mechanical and dielectric properties of porous Si3N4 ceramics prepared by modified water‐based gel casting

Light and Strong Hierarchical Porous SiC Foam for Efficient Electromagnetic Interference Shielding and Thermal Insulation at Elevated Temperatures.