Abstract:Enzymatic hydrolysis lignin (EHL), lignosulfonate (LS), alkali lignin (AL), and hydrolysis lignin (HL) residues are mostly burned for heating in industrial production, which greatly wastes resources and pollutes the environment. In this study, we investigated the effects of different temperatures and catalyst-to-biomass mass (C/B) ratios on the relative content of hydrocarbons in the products by microwave-assisted pyrolysis in a fluidized bed. Co and Ni bimetal-loaded molecular sieve with core-shell structure (Co-Ni@H/M) was used as the catalyst. The main component of waste plastic, polyethylene (PE), was pyrolyzed with these four lignin residues to prepare monocyclic aromatic hydrocarbons (MAHs), and the mechanism of synergistic interaction in co-pyrolysis was investigated. It was shown that the maximum liquid phase yield and hydrocarbons relative content were obtained at 550 °C when lignin residues were pyrolyzed alone. Compared with the pyrolysis of lignin residues alone, the liquid phase and gas phase yields of co-pyrolysis were improved, while the solid phase yield decreased. Moreover, the temperature for maximum liquid phase yield and hydrocarbons relative content were reduced to 500 °C. Further exploration of the liquid phase products revealed that the relative contents of hydrocarbons in the four lignin residues and PE (EHL-PE, LS-PE, AL-PE, and HL-PE) co-pyrolysis products at 500 °C were 49.6 %, 33.1 %, 37.7 %, and 43.2 %, respectively, with MAHs as the main components. The results of the effect of different C/B ratios on the distribution of pyrolysis products showed that Co-Ni@H/M promoted the deoxygenation of oxygenated compounds, especially phenolic compounds, and the conversion of aliphatic hydrocarbons into MAHs by cyclization and aromatization.

Co-Pyrolysis Behaviors of the Cotton Straw/PP Mixtures and Catalysis Hydrodeoxygenation of Co-Pyrolysis Products over Ni-Mo/Al2O3 Catalyst

Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

Microwave-assisted catalytic upgrading of co-pyrolysis vapor using HZSM-5 and MCM-41 for bio-oil production: Co-feeding of soapstock and straw in a downdraft reactor

Catalytic Co-Pyrolysis of Cellulose and Polypropylene over All-Silica Mesoporous Catalyst MCM-41 and Al-MCM-41.

Catalytic co-pyrolysis of oil palm trunk and polypropylene with Ni–Mo/TiO2 and Ni/Al2O3: Oil composition and mechanism

In-depth Study of Synergism Between Torrefaction and Catalyst for Balanced Production of Bio-Oil from Rice Husk Pyrolysis Based on Hydrocarbons Production, Energy Yield and Deoxygenation Degree

Catalytic co-pyrolysis of rice straw and ulva prolifera macroalgae: Effects of process parameter on bio-oil up-gradation

Catalytic Co-Pyrolysis of Polycarbonate and Polyethylene/polypropylene Mixtures: Promotion of Oil Deoxygenation and Aromatic Hydrocarbon Formation

Origin of Hydrogen in Aromatic and Olefin Products Derived from (Al-) Mcm-41 Catalyzed Co-Pyrolysis of Glucose and Polypropylene Via Isotopic Labeling

Investigation of a Ni-Modified MCM-41 Catalyst for the Reduction of Oxygenates and Carbon Deposits during the Co-Pyrolysis of Cellulose and Polypropylene

Catalytic hydrotreatment of fast pyrolysis oils using Ni-Cu/Al-MCM-41 catalysts

Gas-phase catalytic hydrodeoxygenation of phenolic compounds derived from lignin pyrolysis for hydrocarbon production using Ni@HZSM-5-γ-Al2O3

Effects of CoMo/γ-Al2O3 Catalysts on Product Hydrocarbon and Phenol Distribution during Hydrodeoxygenation of Oxidized Bio-Oil in a Batch Reactor

Effective suppression of coke formation with lignin-derived oil during the upgrading of pyrolysis oils

Hydrodeoxygenation of Oxygenates Derived from Biomass Pyrolysis Using Titanium Dioxide-Supported Cobalt Catalysts

Catalytic HDO of pyrolysis oil in supercritical ethanol with CoMoP and CoMoW catalysts supported on different carbon materials using formic acid as in-situ hydrogen sources

Hydrocarbon-Rich Bio-Oil Production from Ex Situ Catalytic Microwave Co-Pyrolysis of Peanut Shells and Low-Density Polyethylene over Zn-Modified Hierarchical Zeolite

Co-pyrolysis of pinewood and HDPE: pyrolysis characteristics and kinetic behaviors study

Preparation of monocyclic aromatic hydrocarbons from industrial lignin residue and polyethylene co-pyrolysis by microwave-assisted in fluidized bed based on bimetal-loaded HZSM-5/MCM-41 core-shell catalyst

Effect of Ni/Al2O3 mixing on the coking behavior of bio-oil during its pyrolysis: Further understanding based on the interaction between its components