Abstract:The freeze-dry pulsated orifice ejection method (FD-POEM) can be coupled with plasma spheroidization (PS) as an advanced approach for fabricating spherical refractory powders used in laser additive manufacturing. However, the microstructure evolution of FD-POEM powders, which include components of various melting points, during ultrahigh-temperature PS treatment remains unclear. In this work, the morphology, chemical composition, and microstructure of MoSiBTiC alloy powders, as representative PS powders, were systematically investigated. The mesh-structured FD-POEM powders underwent complete densification, resulting in a 52 % reduction in particle size. The PS powders were composed of coarse solid solution Mo (Mo-ss) and fine eutectic Mo5SiB2/TiC phases, consistent with the composition of additively manufactured MoSiBTiC alloys. With an increase in Si content, the volume fraction of fine Mo5SiB2 phases increased, resulting in increased Vickers hardness. Notably, the oxygen content of FD-POEM powders decreased by > 99 %, owing to the effective elimination of surface oxides on the initial elemental powders during ultrahigh-temperature PS treatment. This research provides an innovative approach for reducing the oxygen content in refractory powders to be used for additive manufacturing. Enhanced understanding of the microstructure evolution of PS powders can facilitate the composition optimization of refractory powders and development of a microstructure-property database for additively manufactured materials.(c) 2023 The Society of Powder Technology Japan. Published by Elsevier BV and The Society of Powder Technology Japan. All rights reserved.

Plasma‐flash sintering: Metastable phase stabilization and evidence of ionized species

Recent Progresses in Material Fabrication and Modification by Cold Plasma Technique

All-Materials-Inclusive Flash Spark Plasma Sintering

Spark plasma sintering in the presence of a liquid phase

Novel liquid–phase flash sintering of lead zirconate titanate piezo‐ceramics

Change in compositional fluctuation in Pb(Zr<SUB>x</SUB>Ti<SUB>1</SUB>−x)O<SUB>3</SUB> solid solution during spark plasma sintering

Flash sintering incubation kinetics

Phase evolution during conventional and reactive flash sintering of (Mg,Ni,Co,Cu,Zn)O via in situ X‐ray diffraction

Recent Developments of High-Pressure Spark Plasma Sintering: An Overview of Current Applications, Challenges and Future Directions

Reactive flash sintering of ceramics: a review

On the athermal origin of flash sintering: Separating field-induced effects from Joule heating using a current ramp approach

Review of flash sintering: materials, mechanisms and modelling

Flash Sintering Research Perspective: A Bibliometric Analysis

Microstructure Evolution of FD-POEM Powders During High-Temperature Plasma Spheroidization

Microstructural evolution of ZnO via hybrid cold sintering/spark plasma sintering

Using the Spark Plasma Sintering System for Fabrication of Advanced Semiconductor Materials

Flash microwave pressing of zirconia

Superfast Densification of Oxide Ceramics by Spark Plasma Sintering

In-Situ Characterization of Pore Formation Dynamics in Pulsed Wave Laser Powder Bed Fusion

Near-Plasma Chemical Surface Engineering

Effects of Plasma Spheroidization Treatment on the Characteristics of MoSiBTiC Powders Fabricated by Freeze-Dry Pulsated Orifice Ejection Method