Abstract:Flash sintering is a novel field-assisted sintering technology for ceramics that allows a dramatic reduction in processing time and temperature. Since 2010, when flash sintering was first reported, it has been a focus of research interest in the field of materials science. Recent study results have confirmed that the sintering temperature decreases with the strength of the applied electric field; for some ceramics, the sintering temperature can be lowered even to room temperature. This represents an innovative breakthrough for ceramic sintering at ultra-low temperatures. However, once the electric field strength in flash sintering is increased, new questions and challenges arise, such as whether or not partial discharge occurs in the green body if under electro-thermal coupling stress, how to quantitatively analyse the impact of discharge on sintering, and, moreover, whether the sintering mechanism under a strong electric field is consistent with that under a weak electric field. These research questions require knowledge of partial discharge detection, dielectric theory, and other topics that are beyond the scope of materials science. To address this need, this review summarises the work carried out in flash sintering with a strong electric field from the perspective of high voltage and insulation technology. First, the flash sintering process and mechanism are briefly introduced. Then, the published literature on flash sintering with a strong electric field for various ceramic materials is summarised in depth. In addition, experimental phenomena that are observed in flash sintering with a strong electric field, such as flash and blackening, are discussed. Finally, some suggestions for future work are presented. It is anticipated that the knowledge gap between different areas of study can be filled by this review.

On the athermal origin of flash sintering: Separating field-induced effects from Joule heating using a current ramp approach

A practical analysis to predict sample overheating in flash experiments using the current ramp methodology

Flash sintering incubation kinetics

Thermal Runaway, Flash Sintering and Asymmetrical Microstructural Development of ZnO and ZnO-Bi2O3 under Direct Currents

Mechanism of flash sintering with high electric field: In the view of electric discharge and breakdown

Flash sintering can induce an anisotropic microstructure in ceramics. A phase field modeling insight

Enhancing microstructure homogeneity and electrical conductivity in flash-sintered 8YSZ: Impact of electric-current ramp control and thermal insulation

Review of flash sintering: materials, mechanisms and modelling

Review of flash sintering with strong electric field

A simple optimized design of an electrode to conduct flash sintering at room temperature and low onset electric field

Model of the effect of arc on flash sintering at room temperature

Mechanism analysis of arc-induced flash sintering of 3YSZ at room temperature

Thermal Runaway in Mold‐Assisted Flash Sintering

Thermal Runaway in Mold-Assisted Flash Sintering

Flash Sintering of ZnO Ceramics at Room Temperature with Bisectional Electrode Distributions

Effects of processing conditions on flash sintering of commercial ZrN

A Mathematical Model for Flash Sintering

Flash Sintering of ZnO Ceramics at 50 °C under an AC Field

Influence of current density on microstructure and dielectric properties during the flash sintering of strontium titanate ceramics

Electric Field Effects in Flash Joule Heating Synthesis

All-Materials-Inclusive Flash Spark Plasma Sintering