Abstract:The separation of H2/CO2 is technologically crucial to produce clean and renewable H2-based energy. There are several established methods used to separate H2 from CO2, but membrane based separation is becoming more prominent due to high energy efficiency and cost effectiveness. However, separation efficiency of existing polymeric membranes is limited due to unfavourable diffusivity and selectivity between H2 and CO2. As such, research objective for this work is to investigate the effectiveness of diamine modification towards two different polymeric membrane materials, PSf and P-84, on their performance in H2/CO2 separation. The effects of different operating pressures and modification time on the permeance and selectivity are also studied. Comparison of pure and modified membranes will be further interpreted. The fabrication of membranes is done by using controlled evaporation method. Then, the prepared membranes will undergo diamine modification using BuDA for 10 and 30 minutes reaction times. All samples were analyzed by gas permeation test for separation performance and SEM and FTIR for membranes characterization. From SEM analysis, the images show that both polymers have defectfree surfaces and porous cross-section structures. FTIR spectra validate the cross-linking reaction by observing the existence of adsorption peak at 1529 cm-1. This specific characteristic peak implies the occurrence of C-N stretch within the membranes. The gas permeation test shows the respective modification towards P-84 and PSf for 10 and 30 minutes reaction times causes H2 permeability to increase drastically. Based on the experimental result, P-84 membrane with 10 minutes BuDA-modification reaction time and 5 bar operating pressure gives the best H2 permeability performance. By increasing the time to 30 minutes, the H2/CO2 selectivity of both polymers were increased to 4.97 and 6.09, respectively compared to its neat membranes.

Recent advances in polymeric facilitated transport membranes for carbon dioxide separation and hydrogen purification

CO2 Facilitated Transport Through an Acrylamide and Maleic Anhydride Copolymer Membrane

Recent Progress on Submicron Gas-Selective Polymeric Membranes

Facilitated Transport Membranes With Ionic Liquids for CO2 Separations

Recent Advances in Polymer-Inorganic Mixed Matrix Membranes for CO2 Separation

Polymer Materials for Membrane Separation of Gas Mixtures Containing CO2

Synthesis and optimization of high-performance amine-based polymer for CO2 separation

High-Performance Polymers for Membrane Co2/N-2 Separation

Post‐synthesis Amination of Polymer of Intrinsic Microporosity Membranes for CO2 Separation

Sorption Behavior and Separation Performance of Novel Facilitated Transport Membranes for CO2/CH4 Mixtures

Mixed matrix membranes for CO2 separations by incorporating microporous polymer framework fillers with amine-rich nanochannels

Molecular-level manipulation of polyamide membranes for high-performance H2/CO2 separation

Mechanically stable polymer molecular sieve membranes with switchable functionality designed for high CO2 separation performance

Advances in high permeability polymer-based membrane materials for CO 2 separations

Current Research on The Development of Carbon Separation and Capture with Polymeric Membrane: A State of The Art Review

A Review of the Recent Progress in the Development of Nanocomposites Based on Poly(ether- block-amide) Copolymers as Membranes for CO2 Separation

Diamine modified polymeric membranes for hydrogen/carbon dioxide separation

Recent advances of the interfacial polymerization process in gas separation membranes fabrication

Polyimide/Ionic Liquids Hybrid Membranes with NH 3 -Philic Channels for Ammonia-Based CO 2 Separation Processes

On the transport of CO$_2$ through humidified facilitated transport membranes

Thin film composite membranes for postcombustion carbon capture: Polymers and beyond