Abstract:Membranes for post-combustion CO2 capture are required to have a high CO2 permeance due to the limited driving force. For facilitated transport membranes synthesized with polyvinylamine (PVAm), a defect-free selective layer of <200 nm is usually required to render sufficient permeance with high CO2/N2 selectivity. In order to meet such a demand through the knife-coating process, the coating solution needs to have a high viscosity at a relatively low concentration to minimize its penetration into the substrate. The demand was met by synthesizing PVAm with an ultrahigh molecular weight (MW) via inverse emulsion polymerization (IEP) in this study. Compared to solution polymerization, IEP isolates the reaction in inverse micelles suspended in a continuous organic phase, which allows excellent dissipation of the heat generated by the reaction and reduces gel formation drastically. The polymerization parameters, including monomer concentration, initiator concentration, and reaction temperature, were investigated to obtain the optimal MW of PVAm for membrane performance. As compared to solution polymerization, IEP enhanced the MW of PVAm from 1.2 to 12.7 MDa, which minimized the penetration of the coating solution into the substrate and hence the extra mass transfer resistance. The effect of MW and degree of hydrolysis of PVAm on the membrane transport properties were studied. Furthermore, by employing PVAm with a MW of 12.7 MDa to strengthen the polymer matrix, the loading of piperazine glycinate in the membrane was increased up to 85 wt%. The resultant membrane achieved a CO2 permeance of 839 GPU and a CO2/N2 selectivity of 161 at the typical flue gas temperature of 57 °C.

Synthesis and optimization of high-performance amine-based polymer for CO2 separation

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by in Situ Polymerization

Post‐synthesis Amination of Polymer of Intrinsic Microporosity Membranes for CO2 Separation

Large-scale preparation of composite membranes for CO2 separation via interfacial polymerization: Monomer selection and processing parameter optimization

Molecular-level manipulation of polyamide membranes for high-performance H2/CO2 separation

Enhancing membrane performance for CO2 capture from flue gas with ultrahigh MW polyvinylamine

Poly (Vinyl Alcohol) Composite Membrane with Polyamidoamine Dendrimers for Efficient Separation of CO2/H2 and CO2/N2

Mixed matrix membranes for CO2 separations by incorporating microporous polymer framework fillers with amine-rich nanochannels

High-performance CO2/CH4 separation membrane fabrication with PVAm modified by the MOFs containing amine groups

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Selective Separation of Low Concentration CO2 Using Hydrogel Immobilized CA Enzyme Based Hollow Fiber Membrane Reactors

Preparation and Characterization of HEMA-co-VAm/PDA@GO/PSf Membrane with Enhanced CO2 Separation

Metal-Organic Framework/Pvdf Composite Membranes with High H-2 Permselectivity Synthesized by Ammoniation

Mechanically stable polymer molecular sieve membranes with switchable functionality designed for high CO2 separation performance

Mixed-matrix membranes comprising porous organic molecular cage for efficient CO2 capture

Enhanced polyphosphazene membranes for CO2/CH4 separation via molecular design

High-Performance Polymers for Membrane Co2/N-2 Separation

High-efficiency CO2 separation using hybrid LDH-polymer membranes

Preparation and Separation Performance of PDMS Composite Membranes for CO2 Separation from CO2-DMC System

Preparation of a PVA/Chitosan/Glass Fiber Composite Membrane and the Performance in CO2 Separation

Sorption Behavior and Separation Performance of Novel Facilitated Transport Membranes for CO2/CH4 Mixtures