Abstract:The separation1of H2/CO21is1technologically crucial to1produce clean and renewable H2-based energy. There are several established methods used to separate H2 from CO2, but membrane-based separation is becoming more prominent due to high energy efficiency and cost effectiveness. However, separation efficiency of existing polymeric membranes is limited due to unfavourable diffusivity and selectivity between H2 and CO2. As such, motivated research through investigating the effectiveness of diamine modification towards two different polymeric membrane materials (PSf and P-84) on their performance in H2/CO2 separation. The effects of different operating pressures and modification time on the permeance and selectivity are also studied. Comparison of pure and modified membranes will be subsequently undertaken. The fabrication of membranes is done by using controlled evaporation method. Then, the prepared membranes will undergo diamine modification using BuDA for 10 and 30 minutes reaction times. All samples were analyzed by gas permeation test for separation performance and SEM and FTIR for membranes characterization. From SEM analysis, the images show that both polymers have defect-free surfaces and porous cross-section structures. FTIR spectra validate the cross-linking reaction by observing the existence of adsorption peak at 1529 cm. This specific characteristic peak implies the occurrence of C-N stretch within the membranes. The gas permeation test shows the respective modification towards P-84 and PSf for 10 and 30 minutes reaction times causes H2 permeability to increase drastically. Based on the experimental result, P-84 membrane with 30 minutes BuDA-modification reaction time and 5 bar operating pressure gives the best overall H2/CO2 saperation performance. By increasing the time to 30 minutes, the H2/CO2 selectivity of both polymers were increased to 4.97 and 6.09, respectively compared to its neat membranes.

Diamine modified polymeric membranes for hydrogen/carbon dioxide separation

Diamine Modified Polysulfone and P-84 Symmetric Membranes for Hydrogen / Carbon Dioxide Separation

Improving the Selectivity of ZIF-8/Polysulfone-Mixed Matrix Membranes by Polydopamine Modification for H2/CO2 Separation

Molecular-level manipulation of polyamide membranes for high-performance H2/CO2 separation

CARBON DIOXIDE/METHANE SEPARATION PERFORMANCE BY MIXED MATRIX MEMBRANE FROM POLYSULFONE/ HALLOYSITE NANOTUBES

High-efficiency CO2 separation using hybrid LDH-polymer membranes

Development of a P84/ZCC Composite Carbon Membrane for Gas Separation of H2/CO2 and H2/CH4

Preparation and Separation Performance of PDMS Composite Membranes for CO2 Separation from CO2-DMC System

Enhanced polyphosphazene membranes for CO2/CH4 separation via molecular design

Sorption Behavior and Separation Performance of Novel Facilitated Transport Membranes for CO2/CH4 Mixtures

Novel PMDA-ODA Polyimide / Polystyrene Nanocomposite Membranes for Carbon Dioxide Separation

Enhanced gas separation performance for H 2 purification using MIL-68(ln)-nh 2 /PES mixed-matrix membranes

Advancements in Gas Separation for Energy Applications: Exploring the Potential of Polymer Membranes with Intrinsic Microporosity (PIM)

Experimental and molecular simulation study of a novel benzimidazole-linked polymer membrane for efficient H 2 /CO 2 separation

Polymide/Fe_3O_4-carbonized Membranes for Gas Separation

Performance of Multilayer Composite Hollow Membrane in Separation of CO2 from CH4 in Mixed Gas Conditions

Hybrid Fluoro-Based Polymers/Graphite Foil for H2/Natural Gas Separation

Investigation of the effect of Ni and Cu variant MOF-74 in the Polydimethylsiloxane (PDMS)-based Mixed Matrix Membranes (MMMs) for efficient gas separation applications

ELEVATED H2/N2 SEPARATION PERFORMANCE BY ANNEALING POST-TREATMENT OF POLYSULFONE HOLLOW FIBER MEMBRANE

Poly (Vinyl Alcohol) Composite Membrane with Polyamidoamine Dendrimers for Efficient Separation of CO2/H2 and CO2/N2

High-performance CO2-selective Hybrid Membranes by Exploiting MOF-breathing Effects.