Abstract:Gold is widely used as the electrode material in different chemi-and biosensing applications while cyclic voltammetry (CV) in sulfuric acid solutions is a commonly employed method for gold surface preparation and characterization. However, as shown herein, chloride leakage from the Ag/AgCl/sat. KCl reference electrode and platinum dissolution from the platinum counter electrode can severely compromise the reproducibility and hence the reliability of the prepared gold electrodes. The aim of this work is to obtain a comprehensive understanding of the separate and interdependent effects of the aforementioned factors on the voltammetric behavior of microfabricated polycrystalline gold electrodes. It is shown that the leakage of chloride gives rise to etching of both the gold working and the platinum counter electrodes and that the chloride concentration has a strong influence on the ratio between the obtained gold and platinum concentrations in the electrolyte. The dissolved gold and platinum are then re-deposited on the gold electrode on the cathodic voltammetric scan, changing the structure and properties of the electrode. It is also demonstrated that the changes in the properties of the gold electrode are determined by the ratio between the co-deposited platinum and gold rather than the absolute amount of platinum deposited on the gold electrode. In addition, the chloride and sulfate adsorption behavior on the gold electrode is carefully investigated. It is proposed that redox peaks due to the formation of the corresponding Au(I) complexes can be seen in the double layer region of the voltammogram. The results show that the chloride leakage from the reference electrode needs to be carefully controlled and that platinum counter electrodes should be avoided when developing gold sensing electrodes. The present comprehensive understanding of the electrochemical performance of gold electrodes prepared using CV should be of significant importance in conjunction with both fundamental investigations and practical applications.

Insights into the Effects of Chloride Ions on Cyanide-Free Gold Electrodeposition

Effect of Sulfate Ions on Anodic Polarization Behavior of Nanocrystalline Copper Bulk

Kinetic Analysis on Anodic Polarization Behavior of Nanocrystalline Copper in Na2SO4 Solution

Revisiting the Factors Influencing Gold Electrodes Prepared Using Cyclic Voltammetry

Suppressing Sulfite Dimerization at a Polarized Gold Electrode/Water Solution Interface for High-Quality Gold Electrodeposition

Novel and Green Chemical Compound of HAu(Cys) 2 : Toward a Simple and Sustainable Electrolyte Recipe for Cyanide-Free Gold Electrodeposition

Computational Chemistry and Electrochemical Studies of Adsorption Behavior of Organic Additives during Gold Deposition in Cyanide-free Electrolytes

A SERS Investigation of Cyanide Adsorption and Reactivity during the Electrodeposition of Gold, Silver and Copper from Aqueous Cyanocomplexes Solutions

Dissolution of gold in chalcopyrite-containing cyanide solutions

Cyanide-Free Electrolyte for Au(Iii) and Au(I) Electrodepositing Using Dmh As Complexing Agent

Electrochemical dissolution behavior of gold and its main coexistent sulfide minerals in acid thiocyanate solutions

Effect of chloride anion on the electrochemical charging of gold nanoparticle films

Mechanism of Electrochemical Oxidation of Gold Surfaces in a Novel Cobalt(ii)-Glycine-thiosulfate Leaching System: an Electrochemical Experiments and DFT Study

Effect of Alkali Metal Cations and Trace Metal Impurities on Cathodic Corrosion of Gold Electrode Surfaces

Preparation of cyanide-free gold-tin alloys by ultrasonic-assisted pulse electrodeposition

Multifaceted insights into Au coatings electrodeposited from a ChCl-EG based Deep Eutectic Solvent (DES): Unravelling the effect of surfactant polarity and current density on the morphology, mechanical properties, and anti-tarnishing efficacy

Effect of lead ions on gold dissolution in the Cu2+ - en - S2O32− system

Effects of four carboxyl-containing additives on imitation gold electroplating Cu-Zn-Sn alloys in an HEDP system

New Insights into the Mechanism of Pyrite Oxidation in Copper(ii)–ammonia–thiosulfate Gold Leaching System: an Electrochemical, AFM, Raman Spectroscopy and XPS Investigation

Electrochemical analysis of copper-EDTA-ammonia-gold thiosulfate dissolution system

A comprehensive review of various non-cyanide electroplating baths for the production of silver and gold coatings