Abstract:The electrodeposition of a Cu–Sn binary alloy on stainless steel from a cyanide-free alkaline electrolyte containing EDTA·2Na and C4H4O6KNa was investigated to explore the possibility of a cyanide-free double complexing system that maintains the decorative quality and coating performance. The Cu–Sn co-deposition occurred at −0.95 Vvs.Hg|HgO, and the height of cathode peak A from the BR bath was −0.0280 A. EDTA·2Na could simultaneously complex with Cu ions and Sn ions, while C4H4O6KNa could only complex with Cu ions, which was shown through the analysis of the cyclic voltammetry (CV) curves together with the nuclear magnetic resonance (NMR) results. The molar concentration ratio and sum of the two main salts or the two complexing agents, and the pH of the electroplating solutions were shown to influence the surface micromorphology, composition and phase structure of the Cu–Sn coatings. The scanning electron microscopy (SEM) analysis showed that the Cu–Sn coating obtained from the bath with EDTA-tartrate double complexing agents exhibited smaller grain sizes than that obtained from the bath with the single EDTA or tartrate complexing agent, and the smallest grain size of 0.2 μm was obtained from the BR bath. In addition to being smaller than the others, this coating contained uniform particle sizes. The energy-dispersive X-ray spectroscopy (EDS) analysis indicated that the composition of the Cu–Sn coating obtained from the BR bath was 92.8 wt% Cu and 7.2 wt% Sn, and this coating was golden in colour. X-ray diffraction (XRD) showed that the Cu–Sn coatings were crystalline and were composed of a mixture of Cu, Cu6Sn5, [Cu, Sn] and Cu10Sn3 phases, indicating the formation of Cu–Sn binary alloy. These results may provide theoretical guidance for the electrodeposition technology of other alloy coatings.

Cyanide-Free Electrolyte for Au(Iii) and Au(I) Electrodepositing Using Dmh As Complexing Agent

Communication-A Cyanide-Free Electrolyte for Hard Gold (Au-Co) Electrodepositing Utilizing DMH As Complexing Agent

Experimental and theoretical studies of DMH as a complexing agent for a cyanide-free gold electroplating electrolyte

Cyanide-free electrolyte for Au/Co–Au nano-multilayer electrodeposition utilising 5,5-dimethylhydantoin as a complexing agent

Electrochemical Fabrication of Nanoporous Gold

Computational Chemistry and Electrochemical Studies of Adsorption Behavior of Organic Additives during Gold Deposition in Cyanide-free Electrolytes

Novel and Green Chemical Compound of HAu(Cys) 2 : Toward a Simple and Sustainable Electrolyte Recipe for Cyanide-Free Gold Electrodeposition

Study on Composition of Karat Gold Deposition Without Cyanide by Electroforming

Preparation of cyanide-free gold-tin alloys by ultrasonic-assisted pulse electrodeposition

An electrolyte for electrodeposition of hard gold based on choline chloride–urea ionic liquid

Fabrication of gold microelectrodes on polystyrene sheets by UV-directed electroless plating and its application in electrochemical detection

Complexing Agent Study Via Computational Chemistry for Environmentally Friendly Silver Electrodeposition and the Application of a Silver Deposit

Novel Pd-Catalyzed Electroless Au Deposition Method using a Sulfite Solution

Electrochemical behavior of gold dissolution with a novel eco-friendly synthetic gold lixiviant

The study of direct gold electrowinning from dilute cyanide solutions

The electrodeposition of low-Sn imitation gold Cu–Sn alloy from EDTA-tartrate double complexing agents

Sustainable and effective gold(I) separation from aurocyanides wastewater and its mechanism using guanidinium ionic liquids

Highly Efficient Recovery of Au(I) from Gold Leaching Solution Using Sodium Dimethyldithiocarbamate

A comprehensive review of various non-cyanide electroplating baths for the production of silver and gold coatings

DMH and NA–based Cyanide-Free Silver Electroplating Bath: a Promising Alternative to Cyanide Ones in Microelectronics

pH-Dependent selective extraction of gold(iii) from synthetic solution and computer motherboard leachate using a hybrid nanocomposite