Abstract:Owing to the significant advantages of linear transformer driver (LTD) technology, it becomes a new pulsed power technology for the construct of high-voltage, high-current pulsed-power accelerators. However, the LTD technology requires that the closure of the switches in the cavities are synchronized with the arrival of the electromagnetic pulse propagating downstream and the trigger technology is hard to achieve the stringent demands on the cavity-triggering sequences at present. In this paper, one kind of self-trigger LTD technology which is based on the principle of electromagnetic induction is proposed. In order to explore the feasibility of self-trigger LTD, a circuit model of a self-trigger LTD module composed of 60 1-MA cavities is established in PSPICE. Through simulation of the model, in which the closure of the gas switches in the cavities are depended on the threshold voltages of gas switches, the output pulse shaping capability of a self-trigger LTD module is analyzed. The results demonstrate that the 10%-90% rise time and the peak of output current of the self-trigger LTD module is acceptable compared with the output current of a LTD module, in which the firing sequence of each LTD cavity is synchronized with the speed the electromagnetic pulse propagates along the output line. The self-trigger LTD module can generate synchronous trigger pulses with the 10%-90% rise time of 53ns and the peak voltage of 100kv. The self-trigger LTD modules with different cavity-triggering sequences are simulated and their cavity-triggering sequences have been detected. The peak current at the output of self-trigger LTD module is in the range of 0.91MA to 0.95 MA with the 10%-90% rise time alters in the range of 53ns to 70n.

Investigation of Rise Time and Overshoot in Pulse Transformers with Different Topologies for Electromagnetic Trigger of SCRs

Design of Compact Transmission Line Transformer for High Voltage Nanosecond Pulses

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

Study of Turn-on Characteristics of SCRs for ESD Protection with TDR-O and TDR-S TLPs

The influence mechanism of leakage inductance and distributed capacitance on nanosecond pulse transformer-type trigger

Inverstigation of high turn-on speed MOS-Triggered SCR in 0.13μm CMOS process

Research on Transient Electric Field Distribution of High-Frequency Transformers Based on COMSOL and SIMULINK Co-simulation

Simulation and Analysis of Electromagnetic Properties at the Secondary Port of Electronic Current Transformers Under Very Fast Transient Overvoltage

Study on Novel Air-Core Transformer Type SCFCL with a Trigger Winding

Principle and Influencing Factors of the Transformer Sympathetic Inrush

Key factors affecting trigger voltage of SCRS for ESD protection

On switching transient modeling and analysis of electronic on-load tap-changers based Sen transformer

Improved Marx Pulse Generator With Auxiliary Trigger Topology (2022)

Rectangular Pulse Sharpening of High Voltage Pulse Transformer Based on Magnetic Compression Switch Technology

Investigation of Turn-on Speeds of Electrostatic Discharge Protection Devices Using Transmission-Line Pulsing Technique

Design and Simulation of a Self-Triggering Linear Transformer Driver

Framework and Research Methodology of Short-Timescale Pulsed Power Phenomena in High-Voltage and High-Power Converters

Analysis of Transient Saturation and Sympathetic Inrush of Transformers

Development of All Solid State Nanosecond Pulse Transformer Fault Detection Device Based on Marx Circuit

Model Analysis and Simulation of a Self-Trigger LTD Module

Transient modeling and switching logic analysis of a power-electronic-assisted OLTC based Sen transformer