Abstract:The proton exchange membrane fuel cell （PEMFC） must ensure sufficient hydration of the proton exchange membrane during operation， and it must also avoid condensed liquid water blocking the mass transfer channel. In order to analyze the effect of cathode relative humidity on the membrane water content and output performance of proton exchange membrane fuel cells， the cathode inlet water content （CIWC） model was established. Firstly， the influence of membrane resistance by temperature and water content is considered in this model， the water content calculation formula of the membrane is derived， and the CIWC model is coupled to the computational fluid dynamics software Fluent for calculation. Secondly， a fuel cell test bench was built to conduct experiments when the operating temperature was 60 °C， the relative humidity of the anode was 100%， and the relative humidity of the cathode was 50%， 75% and 100%， respectively. Finally， the simulated data of CIWC model and Fluent built-in model are compared with the experimental values， and the species distribution of membrane water content， membrane conductivity， and molar fraction of water in the catalytic layer were analyzed on the cathode side. The results show that when the cathode relative humidity is 50%， the accuracy of the CIWC model is improved by 17.67% compared to the Fluent model at a voltage of 0.739 V. The maximum relative error between the CIWC model and the experimental value is 5.66% at 100% cathode relative humidity. With the increase of the relative humidity of the cathode， the membrane water content increases continuously at a voltage of 0.75 V and tends to be saturated at a voltage of 0.6 V， and the membrane water content， the proton conductivity and the molar fraction of the water in the catalytic layer gradually increase in the direction of the flow field from the air inlet to the outlet. When the cathode relative humidity is 75%， the fuel cell output power density is up to 272.08 mW/cm 2 ， and the distribution of membrane water content is more uniform.

Effect of cathode recirculation on high potential limitation and self-humidification of hydrogen fuel cell system

Self-humidifying effect of air self-circulation system for proton exchange membrane fuel cell engines

Study on Voltage Clamping and Self-Humidification Effects of Pem Fuel Cell System with Dual Recirculation Based on Orthogonal Test Method

Experimental study on the influence of operating conditions on performance decline with periodic anode purges in a vehicular PEMFC stack

Experimental Study on Dual Recirculation of Polymer Electrolyte Membrane Fuel Cell

Experimental study of voltage uniformity and stability of H 2 /O 2 PEM fuel cell stack with dead-end anode and recirculation cathode

Analysis of the influence of cathode recirculation strategy on proton exchange membrane fuel cell from internal polarization and external characteristics perspectives

Performance analysis and dynamic characteristics of a proton exchange membrane fuel cell with dual recirculation pumps for air-free applications

Optimization strategies to mitigate reactant starvation in a dead-ended hydrogen–oxygen proton exchange membrane fuel cell during cyclic loading

Control-oriented Modeling and Exploration of Hygrothermal Characteristics of Air-Cooled Proton Exchange Membrane Fuel Cell

Comparison of Self-Humidification Effect on Polymer Electrolyte Membrane Fuel Cell with Anodic and Cathodic Exhaust Gas Recirculation

High-potential control for durability improvement of the vehicle fuel cell system based on oxygen partial pressure regulation under low-load conditions

Anode purge management for hydrogen utilization and stack durability improvement of PEM fuel cell systems

Hydrogen Pumping Effect Induced by Fuel Starvation in A Single Cell of A Pem Fuel Cell Stack at Galvanostatic Operation

Visualization study of improving anode water management by variable pressure hydrogen supply in proton exchange membrane fuel cell

Experimental Investigation on the Open Cathode Air-Cooled Proton Exchange Membrane Fuel Cells: Optimum Operating Parameters and Control Strategies

Effect of cathode relative humidity on membrane water content and performance of PEMFC

Mechanistic investigation on the voltage collapse of polymer electrolyte membrane fuel cell under high-temperature and low-humidity conditions

Multiple in-situ measurement of water transport in the bipolar plate of proton exchange membrane fuel cell

Comprehensive performance evaluation of air-assisted atomization humidification for high-power fuel cell systems

Air humidity and water pressure effects on the performance of air-cathode microbial fuel cell cathodes