Abstract:Background and objective: Complex acetabular fractures involving quadrilateral areas are more challenging to treat during surgery. To date, there has been no ideal internal fixation for these acetabular fractures. The purpose of this study was to evaluate the biomechanical stability of complex acetabular fractures using a dynamic anterior titanium-plate screw system of the quadrilateral area (DAPSQ) by simulating the standing and sitting positions of pelvic specimens. Materials and methods: Eight formal in-preserved cadaveric pelvises aged 30-50 years were selected as the research objects. First, one hip of the normal pelvises was randomly used as the control model (group B) for measurement, and then one hip of the pelvises was randomly selected to make the fracture model in the 8 intact pelvises as the experimental model (group A) for measurement. In group A, acetabular both-column fractures in the quadrilateral area were established, and the fractures were fixed by DAPSQ. The biomechanical testing machine was used to load (simulated physiological load) from 400 N to 700 N at a 1 mm/min speed for 30 s in the vertical direction when the specimens were measured at random in simulated standing or sitting positions in groups. The horizontal displacement and longitudinal displacement of the acetabular fractures in the quadrilateral area were measured in both the standing and sitting simulations. Results: As the load increased, no dislocation or internal fixation breakage occurred during the measurements. In the standing position, the horizontal displacement of the quadrilateral area fractures in group A and group B appeared to be less than 1 mm with loads ranging from 400 N to 700 N, and there was no significant difference between group A and group B (p > 0.05). The longitudinal displacement appeared to be greater than 1 mm with a load of 700 mm in group A (700 N, 2 cases), and the difference was significant between group A and group B (p < 0.05). In the sitting position, the horizontal and longitudinal displacements of the quadrilateral areas were within 0.5 mm in group A and group B, and there was no significant difference between group A and group B (p > 0.05). Conclusion: For complex acetabular fractures in the quadrilateral area, DAPSQ fixation may provide early sitting stability, but it is inappropriate for patients to stand too early.

The Influence in Anterior Column with Posterior Hemi-Transverse Fractures of the Acetabulum Fixed by DPASQ Which Caused by the Stability of the Contralateral Pelvic Ring:A Finite Element Analysis

Finite element analysis into the effect of discectomy on lumbar biomechanical characteristics

Experimental study on the biomechanical stability of complex acetabular fractures in the quadrilateral area: application of a dynamic anterior titanium-plate screw system

Establishment of Finite Element Model of Anterior Cervical Transpedicular System for Reconstruction of Cervical Stabili-Ty after Subtotal Resection of Two Segments of Lower Cervical Spine

Anterior Cervical Transpedicular Screw Fixation System in Subaxial Cervical Spine: A Finite Element Comparative Study.

Biomechanical Comparison of Fixation Systems in Posterior Wall Fracture of Acetabular by Finite Element Analysis

Biomechanical Research on Contour Cage with Transacetabular Screws Fixation in Revision Total Hip Arthroplasty.

A comparative biomechanical analysis of suprapectineal and infrapectineal fixation on acetabular anterior column fracture by finite element modeling

[Use of a test exposing lymphocytes to mitomycin C in the diagnosis of Fanconi's anemia].

Optimization Technique and Fe Simulation for Lag Screw Placement in Anterior Column of the Acetabulum

Antegrade Posterior Column Acetabulum Fracture Screw Fixation via Posterior Approach: A Biomechanical Comparative Study

Respiration and gas exchange during recovery from exercise in the American alligator.

Biomechanical Research on Anterior Double‐plate Fixation for Vertically Unstable Sacroiliac Dislocations

Primary stability of multi-hole acetabular cup combined with posterior column plating for the fixation of complex acetabular fractures in elderly patients: a biomechanical analysis

Stability evaluation of anterior external fixation in patient with unstable pelvic ring fracture: a finite element analysis.

Three-dimensional finite element analysis on different implant fixation for L1 segment burst fracture

Biomechanical Effects of Anterior Decompression and Fusion With Cervical Two-Segments Different Internal Fixation Systems: A Finite Element Study

Computer Aided Design and Evaluation of New Anatomic Fixation System on Entire Pelvic Model

Numerical study of pedicle screw construction and locking compression plate fixation in posterior pelvic ring injuries: Analyzed by finite element method

Importance of the Posterior Plate in Three‐Column Tibial Plateau Fractures: A Finite Element Analysis and Clinical Validation

Modified Pedicle Screw-Rod Versus Anterior Subcutaneous Internal Pelvic Fixation for Unstable Pelvic Anterior Ring Fracture: A Retrospective Study and Finite Element Analysis