Abstract:To compare the biomechanical properties of several anterior pelvic ring external fixators with two new configurations in the treatment of Tile C pelvic fractures, in order to evaluate the effectiveness of the new configurations and provide a reference for their clinical application. A finite element model of a Tile C pelvic ring injury (unilateral longitudinal sacral fracture and ipsilateral pubic fracture) was constructed. The pelvis was fixed with iliac crest external fixator (IC), anterior inferior iliac spine external fixator (AIIS), combination of IC and AIIS, combination of anterior superior iliac spine external fixator (ASIS) and AIIS, and S1 sacroiliac screw in 5 types of models. The stability indices of the anterior and posterior pelvic rings under vertical longitudinal load, left–right compression load and anterior–posterior shear load were quantified and compared. In the simulated bipedal standing position, the results of the vertical displacement of the midpoint on the upper surface of the sacrum are consistent with the displacement of the posterior rotation angle, and the order from largest to smallest is IC, AIIS, ASIS + AIIS, IC + AIIS and S1 screw. The longitudinal displacement of IC is greater than that of the other models. The displacements of ASIS + AIIS and IC + AIIS are similar and the latter is smaller. In the simulated semi-recumbent position, the vertical displacement and posterior rotation angle displacement of the midpoint on the upper surface of the sacrum are also consistent, ranking from large to small: IC, AIIS, ASIS + AIIS, IC + AIIS and S1 screw. Under the simulated left–right compression load state, the lateral displacements of the highest point of the lateral sacral fracture end are consistent with the highest point of the lateral pubic fracture end, and the order from large to small is S1 screw, IC, AIIS, ASIS + AIIS and IC + AIIS, among which the displacements of S1 screw and IC are larger, and the displacements of ASIS + AIIS and IC + AIIS are similar and smaller than those of other models. The displacements of IC + AIIS are smaller than those of ASIS + AIIS. Under the simulated anterior–posterior shear load condition, the posterior displacements of the highest point of the lateral sacral fracture end and the highest point of the lateral pubic fracture end are also consistent, ranking from large to small: IC, AIIS, ASIS + AIIS, IC + AIIS and S1 screw. Among them, the displacements of IC and AIIS are larger. The displacements of ASIS + AIIS and IC + AIIS are similar and the latter are smaller. For the unstable pelvic injury represented by Tile C pelvic fracture, the biomechanical various stabilities of the combination of IC and AIIS are superior to those of the external fixators of conventional configurations. The biomechanical stabilities of the combination of ASIS and AIIS are also better than those of the external fixators of conventional configurations, and slightly worse than those of the combination of IC and AIIS. Compared with sacroiliac screw and conventional external fixators, the lateral stabilities of IC + AIIS and ASIS + AIIS are particularly prominent.

Biomechanical Research on Anterior Double‐plate Fixation for Vertically Unstable Sacroiliac Dislocations

Finite Element Analysis of Sacral-Alar-iliac Screw Fixation for Sacroiliac Joint Dislocation.

Computer Aided Design and Evaluation of New Anatomic Fixation System on Entire Pelvic Model

Biomechanical effects of S1 sacroiliac screws versus S2 sacroiliac screws on sacroiliac screws combined with a lumbar iliac fixation in the treatment of vertical sacral fractures: a biomechanical finite element analysis

Biomechanical and Clinical Study of Anterior Transarticular Screw Fixation for Treatment of Traumatic Instability of C1-C2 Joint

Biomechanical Effect of Sacroiliac Screw Fixation with Different Needling, Points on Extorsion Unsta-Hie Pelvis

Biomechanical comparison of four triangular osteosynthesis fixations for unilateral vertical sacral fractures

Biomechanical study of transsacral-transiliac screw fixation versus lumbopelvic fixation and bilateral triangular fixation for "H"- and "U"-type sacrum fractures with traumatic spondylopelvic dissociation: a finite element analysis study

Comparison of stability of two kinds of sacro-iliac screws in the fixation of bilateral sacral fractures in a finite element model

Applied anatomic study of the parameters of screw fixation for the sacroiliac joint

Mechanical comparison between lengthened and short sacroiliac screws in sacral fracture fixation: a finite element analysis

Biomechanical comparative study on external fixators of new configurations in the treatment of Tile C pelvic injury

Comparison of Biomechanical Characteristics and Pelvic Ring Stability Using Different Fixation Methods to Treat Pubic Symphysis Diastasis

Do we need another screw? Sacroiliac screw fixation in open-book pelvic ring injuries (APC type II)

[Study on biomechanical stability in simulated femoral neck fracture fixation by two cannulated screws].

Biomechanical Research on Contour Cage with Transacetabular Screws Fixation in Revision Total Hip Arthroplasty.

Fixation of transforaminal sacrum fractures: a biomechanical study

Double locking plate fixation of sacral fractures in unstable pelvic ring C-type injuries

Experimental study on the biomechanical stability of complex acetabular fractures in the quadrilateral area: application of a dynamic anterior titanium-plate screw system

Biomechanical Comparison of Fixation Systems in Posterior Wall Fracture of Acetabular by Finite Element Analysis

Breakage risk of different sacroiliac screws in unilateral sacral fractures a finite element analysis