Abstract:Martensitic transformation (MT), strain glass transition (SGT) and the corresponding stress-strain responses in cold-rolled Ti49.2Ni50.8 shape memory alloys (SMAs) at various amounts of cold-rolling deformation are investigated. A phase diagram describing all the strain states and transitions among them is established in the temperature – deformation space. It shows a normal sharp, strong first-order B2 to B19′ MT at low deformation levels (cold-rolling thickness reduction εp < 27%), but a continuous B2 to B19′ SGT at high deformation levels (εp ≥ 27%) upon cooling. Superelasticity with small hysteresis, tunable modulus and functional-fatigue resistance properties are achieved by altering the transition behavior from MT to SGT at εp ≥ 27%. Nanodomains of single variant B19′ martensite at the atomic scale are observed by using aberration-corrected scanning transmission electron microscopy in samples with εp = 27%. Further in-situ loading synchrotron-based high energy X-ray diffraction technique shows that the quasi-linear superelasticity associated with the SGT can be attributed to stress-induced continuous growth of B19′ nanodomains. Geometrical phase analysis of high-resolution transmission electron microscopy image reveals a nanoscale network of severe lattice distortion associated with the accumulated high-density of defects at εp ≥ 27%, which is the microstructural origin of the B19′ strain glass state. This work provides a detailed explanation for the long-standing puzzle of unique quasi-linear superelastic response in plastically deformed TiNi SMAs, and may shed light on achieving novel mechanical properties through defect engineering.

Effects of Strain and Electropulse Duration on Elastic Modulus of TiNi Alloy

Effect of Electropulsing Treatment on the Microstructure and Superelasticity of TiNi Alloy

Effect of Electroplastic Rolling on the Ductility and Superelasticity of Tini Shape Memory Alloy

Effect of Electroplastic Rolling on Deformability and Oxidation of NiTiNb Shape Memory Alloy

The Improved Superelasticity of NiTi Alloy Via Electropulsing Treatment for Minutes

Influence of Strain Rate on Mechanical Behavior of TiNi Shape Memory Alloy under Compression

Achieving Ultralow Elastic Modulus in TiNi Alloy by Controlling Nanoscale Martensite Phase

RETRACTED: Effect of Electroplastic Rolling on Deformability, Mechanical Property and Microstructure Evolution of Ti–6Al–4V Alloy Strip

The Improved Plasticity of NiTi Alloy Via Electropulsing in Rolling

Effect of Strain Rate on Microstructure and Mechanical Properties of Electroplastic Rolled ZrTi Alloy

Effect of mechanical expanding on strain recovery characteristics and microstructures of TiNiNb shape memory alloy

Tailoring Elastic Admissible Strain of TiZr Alloy by Cold Rolling Deformation

Tailoring phase composition of a multielement TiZrAlV alloy via electroplastic rolling

Effect of Strain Rate and Temperature on the Deformation Behavior in a Ti-23.1Nb-2.0Zr-1.0O Titanium Alloy

Enhancement of Ductility, Weakening of Anisotropy Behavior and Local Recrystallization in Cold-Rolled Ti-6Al-4V Alloy Strips by High-Density Electropulsing Treatment

Damping behavior of a cold-rolled TiNi alloy

Neutron Diffraction Study on Strain Rate Dependent Mechanical Response in Superelastic NiTi Alloy: Bulk Structural Evolution and Constitutive Model

Strain states and unique properties in cold-rolled TiNi shape memory alloys

Evolution of deformation mechanisms of Ti–22.4Nb–0.73Ta–2Zr–1.34O alloy during straining

A FEM Study on the Mechanical Responses of Pseudoelastic TiNi Alloys to a Particle Normal Loads

High-temperature tensile deformation behavior and microstructure evolution of Ti55 titanium alloy