Abstract:Conventionally assembled monolithic concrete frame structures achieve structural ductility through beam-end failure, which results in structures that are difficult to repair after an earthquake. To improve the seismic and resilience performance, a prefabricated concrete beam–column joint with replaceable graded-yielding energy-dissipating connectors (RGECs) is introduced. The connectors assembled on the upper and lower sides of the beam end dissipate energy and transfer the beam-end load with the steel hinge device. By adjusting the design bearing-capacity coefficient of RGECs to precast beams, the plasticity and damage of the structure can be centered on the core energy-dissipation bending–shear components (BSCs) and buckling segment (BS) of the RGEC, and the structural function can be quickly recovered by replacing only the damaged RGECs after a seismic disaster. Moreover, compared to the conventional joints, the joint with RGEC can achieve target seismic-performance goals at different seismic-risk levels by designing BSCs and BS with graded yielding. Low-cyclic-loading tests were performed on seven full-scale beam–column joint specimens to investigate the effects of different core energy-dissipating member thicknesses, beam reinforcement ratios and loading protocols on the seismic behavior of the proposed joint. Subsequently, the damaged RGECs were replaced, and the structural-function resilience performance was evaluated in terms of the function-recovery efficiency and quality, indicated by the hysteresis response, strain development, and component energy dissipation. The experimental results proved that the beam–column joint exhibited excellent seismic performance and could realize graded-yielding energy dissipation. The damage to the specimens was concentrated in the RGECs, the key members (beams and columns) were in an elastic state, and the energy dissipation ratio of the RGEC was more than 97 %. This enables the rapid recovery of function after earthquakes. After replacing the RGEC, the hysteresis response, strain development, and component energy dissipation of the specimens were consistent with those of the initial specimens. Compared with the original specimen, the difference in each seismic index of the replaced specimen was less than 10 %. Additionally, the structural function recovered quickly, and the resilient performance was good.

Elastic Displacement Spectrum-Based Design Approach for Precast Concrete Frame with Replaceable Energy-Dissipating Connectors

Performance-Based Seismic Design and Evaluation of Fused Steel Diagrid Frame

Self-centering Eccentrically Braced Frames Using Shape Memory Alloy Bolts and Post-Tensioned Tendons

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Seismic Behavior of Pc Column and Steel Beam Composite Moment Frame with Posttensioned Connection

Experimental investigation and seismic response behavior of a self-centering precast concrete frame with hysteretic dampers

Study of Displacement-Based Seismic Design for RC Frame Structures

A stochastic CSM-based displacement-oriented design strategy for the novel precast SRC-UHPC composite braced-frame in the externally attached seismic retrofitting

Improved Seismic Design Using Bolted End Plate Connections For Steel Reinforced Concrete Composite Structures

Strength reserve-based seismic optimization for precast concrete frames with hybrid semi-rigid connections

Development and application of replaceable self-centering energy dissipative braces

Cyclic Testing on Seismic Behavior of Segmental Assembled CFST Bridge Pier with External Replaceable Energy Dissipator

Parametrized multi-objective seismic optimization for precast concrete frame with a novel post-tensioned energy dissipation beam-column joint

Numerical Investigations on Seismic Behavior of Segmental Assembly of Concrete Filled Steel Tube Piers with External Replaceable Energy-Dissipating Links

Dynamic performance and cross-level damage criteria of strengthened reinforced concrete frames with VE energy dissipation braces

Displacement Control of Existing Steel Moment-Resisting Frame Structures Using Buckling-Restrained Braces

Study on Displacement-Based Design Method for Energy Dissipation Structures

Seismic performance evaluation of a novel resilient steel frame with self-centering rocking columns and replaceable energy-dissipating connections for low-rise structures

Performance-based-plastic-design of damage-control steel MRFs equipped with self-centring energy dissipation bays

Numerical and experimental analysis in seismic performance of post-earthquake reinforced concrete frame retrofitted with ECC

Seismic behavior and resilience assessment of prefabricated beam–column joint with replaceable graded-yielding energy-dissipating connectors