Abstract:Thermal and non-thermal plasma processes have been considered as potential methods for continuous gas synthesis of graphene in recent years. A novel approach for the preparation of few-layer graphene nano-flakes (GNFs) is presented in this work. The GNFs are continuously synthesized by non-thermal decomposition of hydrocarbons using a magnetically rotating arc at atmospheric pressure. The products are characterized by transmission electron microscopy (TEM), Raman spectrum, BET measurements and X-ray photoelectron spectroscopy (XPS). The effects of arc current, feedstock gas type, feedstock gas flow rate, C/H mole ratio and buffer gas type on the morphologies and microstructures of pyrolysis products are investigated and discussed. Results show that low power, low carbon concentration and high hydrogen concentration are considered the essential condition for the formation of GNFs. The synthesized GNFs are agglomerative flakes, where each flake is between 50 and 300 nm. Material analyses indicate that the GNFs have excellent properties such as a good crystalline structure, a high purity, a low number of layers, and a large specific surface area. Such characteristics suggest that the GNFs could be applied in fuel cells and energy storages. Building on the above results, a possible nucleation mechanism of graphene is proposed. On the one hand, low concentration of graphene nucleating precursor-polycyclic aromatic hydrocarbons (PAHs), is a necessary condition for the formation of GNFs. A process of slow rate of nucleation and rapid surface growth may occur during the GNFs formation[1]. On the other hand, low C/H mole ratio can form mass activated hydrogen atoms which terminate dangling bonds at edge of graphene and prevent the bending of carbon, that promotes the formation of GNFs[2]. Compared with GNFs prepared in other non-thermal plasmas, this method has a lower energy cost (<0.3 kWh/g ) and no pollution while guaranteeing the quality of GNFs. It is anticipated that the method developed in this paper will be highly advantageous for the mass and continuous productions of GNFs. Additionally, the morphologies and microstructures of final products can be adjusted easily by controlling the operating parameters. Figure 1 Schematic diagram of the experimental apparatus

Effects of hydrogen/carbon molar ratio on graphene nano-flakes synthesis by a non-thermal plasma process

Continuous synthesis of graphene nano-flakes by non-thermal plasma with a magnetically rotating arc at atmospheric pressure

Synthesis of Graphene Flakes Using a Non-Thermal Plasma Based on Magnetically Stabilized Gliding Arc Discharge

Continuous synthesis of graphene nano-flakes by magnetically rotating arc at atmospheric pressure

The morphological transformation of carbon materials from nanospheres to graphene nanoflakes by thermal plasmas

In Situ Synthesis of Nitrogen-Doped Graphene Nanoflakes Using Non-Thermal Arc Plasma

Effects of Buffer Gases on Graphene Flakes Synthesis in Thermal Plasma Process at Atmospheric Pressure

Arc plasma-assisted hydrogenation of few-layer graphene in methane-hydrogen atmospheres

Synthesis of Few-Layer Graphene Flakes by Magnetically Rotating Arc Plasma: Effects of Input Power and Feedstock Injection Position

Pressure-dependent synthesis of graphene nanoflakes using Ar/H2/CH4 non-thermal plasma based on rotating arc discharge

Effect of Hydrogen on the Synthesis of Carbon Nanofibers by CO Disproportionation on Ultrafine Fe3O4

Experimental study of graphene synthesis by different gas-doped plasma

Molecular Understanding of the Effect of Hydrogen on Graphene Growth by Plasma-Enhanced Chemical Vapor Deposition

Controlled regulation of the transformation of carbon nanomaterials under H2 mixture atmosphere by arc plasma

Effects Of Buffer Gas On N-Doped Graphene In A Non-Thermal Plasma Process

Experimental Study and Process Evaluation of Coproduction Graphene, Acetylene and Hydrogen from Methane Pyrolysis by Thermal Plasma

Importance of Gas Heating in Capacitively Coupled Radiofrequency Plasma-assisted Synthesis of Carbon Nanomaterials

The Effect of Hydrogen on the Formation of Nitrogen-Doped Carbon Nanotubes Via Catalytic Pyrolysis of Acetonitrile

Study on Formation Mechanism of Three Types of Carbon Nanoparticles During Ethylene Pyrolysis in Thermal Plasmas

Preparation of few-layer graphene nanosheets by radio-frequency induction thermal plasma

Electrospun polyacrylonitrile-based carbon nanofibers and their hydrogen storages