Abstract:Deformation twinning is an essential plastic deformation mechanism that realizes the trade–off between strength and ductility. Twins nucleate and grow by the coordinated slip of partial dislocations on consecutive {111}–type slip planes. The route of twin growth is responsible for the evolution of twin morphology, which affects the non–coplanar dislocation slips by adjusting the twinning–associated mean free path. Incorporating such twinning mechanisms is critical for the accurate modelling and simulation of deformation behavior. In this study, a discrete dislocation plasticity (DDP) model was developed by integrating the source introduction methods and source activation criteria of Shockley partial dislocation. In the model, two twin nucleation mechanisms, i.e., the internal source and surface source, were considered concurrently, and the additional effect of stacking fault energy on the motion of partial dislocations was introduced. The evolution of partial dislocation slip–mediated deformation twins in micron–sized pillars of twinning–induced plasticity steel under uniaxial compression was investigated. The predicted twin morphologies and stress–strain curves from DDP simulation both agreed well with the experimental results, highlighting the inherent characteristics of partial–dislocation–based twinning behavior. The simulation results showed that the formation of nanometer–sized sharp twin tips was caused by the strong interaction between the front and rear dislocations on adjacent slip planes. In addition, a novel analytical model verified with the DDP simulation was proposed by considering the kinetics of the newly formed twin embryos. The competition between new twin activation and near–twin merging in determining the evolution of twin thickness was analyzed using the analytical model. The dependence of flow stress and twin morphology on the density and distribution of internal sources was demonstrated by considering the new twinning route. This research thus advances the understanding of partial dislocation slip–mediated twinning mechanisms.

Dislocation dissociation induces secondary twinning in titanium

Interactions Between Dislocations and Penta-Twins in Metallic Nanocrystals

Size-Dependent Dislocation-Twin Interactions

Subsequent growth and sequential twinning induced by the interaction of {332} twins in Ti 15Mo alloy

Discrete Twinning Dynamics and Size-Dependent Dislocation-to Twin Transition in Body-Centred Cubic Tungsten

Size-dependent Formation and Thermal Stability of High-Order Twins in Hierarchical Nanotwinned Metals

Two softening stages in nanotwinned Cu

Slip transmutation between basal 〈a〉 dislocation and {112 ̄1} twinning across {112 ̄4} twin boundary in titanium

Transmission electron microscopy observation of a deformation twin in TWIP steel by an ex situ tensile test

Evolution of dislocation and twin structures in Ti3Al during solidification

The Dislocation-Twin Interaction and Evolution of Twin Boundary in AZ31 Mg Alloy

DISLOCATION FEATURES IN POLYSYNTHETICALLY TWINNED TiAl CRYSTALS AFTER DEFORMATION AT ROOM TEMPERATURE

Microtwinning mechanism revealed by its orientation dependence and tension-compression asymmetry in γ′ precipitate-strengthened Ni-based superalloys

In situ EBSD study of the twinning deformation behaviors in pure titanium

Twinning-induced plasticity with multiple twinning modes and disclinations in Mg alloys

Cross-slip of extended dislocations and secondary deformation twinning in a high-Mn TWIP steel

Effects of Twin-Dislocation and Twin-Twin Interactions on the Strain Hardening Behavior of TWIP Steels

Distribution of dislocation-twin interaction in TWIP steel under different loading modes

Evolution of partial dislocation slip–mediated deformation twins in single crystals: a discrete dislocation plasticity model and an analytical approach

Dislocation Plasticity Reigns in a Traditional Twinning-Induced Plasticity Steel by in Situ Observation

Twin junctions with geometric compatibility and mobility in titanium and magnesium