Abstract:The interface bonding strength between adjacent melt lines formed in the melt-extrusion-based 3D printing (ME3DP) process largely governs the mechanical properties of the as-printed parts. But this normally leads to mechanical anisotropy of which the mechanism is not very clear. In this work, based on the investigation of the temperature attenuation behavior of newly deposited thermoplastic polyurethane (TPU) melt in a ME3DP process, the mechanical dependence on the interface development was explored. First, the temperature attenuation of a newly deposited melt in an open environment was found to be well fitted by the Power-law function. Then the effect of envelope temperature on the tensile property of the as-printed TPU was studied using an electric-heating bed (EHB) which endowed the whole printed sheets with a temperature near EHB temperature. To explore the mechanism of mechanical anisotropy, tensile testing was then performed for the printed sheets in both longitudinal and transverse directions, respectively. Results showed that the ultimate tensile strength (UTS), as well as the elongation at break measured along the transverse direction, increased with the increase of EHB temperature, which was mainly attributed to the improved interface bonding. In comparison, the UTS along the longitudinal direction kept relatively stable, slightly increasing initially and then followed by a minor decrease. Of note is the fact that the mechanical properties of printed parts were governed simultaneously by both the wall-shear-induced orientation effect of molecular chains at the surface of the deposited melt line and the crystallization morphology inside the deposited molten filament was concluded in this work. A high envelope temperature not only promoted the molecular diffusion around the interface layer, enhanced the interface bonding, and overcome the mechanical anisotropy but also promoted the crystallization kinetics. The printed TPU with developed crystallized morphology exhibited improved yield stress in the longitudinal direction above a critical temperature. This work demonstrates an insight into the mechanical anisotropy of 3D-printed polymers, paving the way to print high-strength parts via ME3DP.

Fabrication of new thermoplastic polyurethane elastomers with high heat-resistance for 3D printing derived from 3,3-dimethyl-4,4'-diphenyl diisocyanate

Rational design of a novel NDI-based thermoplastic polyurethane elastomer with superior heat resistance

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Polyurethanes Based on Polylactic Acid for 3D Printing and Shape-Memory Applications

Properties of thermoplastic polyurethane synthesized from bio‐based diisocyanate for FDM 3D printing

3D Printable Plasmonic Titanium Nitride Nanoparticles Enhanced Thermoplastic Polyurethane Composite for Improved Photothermal De-Icing and Infrared Labeling

Synthesis and Characterization of Crystallizable Aliphatic Thermoplastic Poly(ester Urethane) Elastomers Through a Non-Isocyanate Route

3D hydrangea-like Ti3C2Tx MXene@FeNi layered double hydroxide derived to efficiently inhibit the fire hazard of thermoplastic polyurethane

Design of Rgo-Bn Hybrids for Enhanced Thermal Management Properties of Polyurethane Composites Fabricated by 3D Printing

Synthesis and Characterization of XDI-based Thermoplastic Polyether Polyurehtane Elastomers

Preparation and Properties of Novel Thermoplastic Vulcanizate Based on Bio-Based Polyester/Polylactic Acid, and Its Application in 3D Printing

Mechanical Properties of Additively Manufactured Thermoplastic Polyurethane (TPU) Material Affected by Various Processing Parameters

Preparation, morphology and superior performances of biobased thermoplastic elastomer by in situ dynamical vulcanization for 3D-printed materials

Fabrication of Polydimethylsiloxane-Based Thermoplastic Polyurethanes with Excellent Toughness and Cold Resistance

Medical-Grade PCL Based Polyurethane System for FDM 3D Printing—Characterization and Fabrication

Bio-based Thermoplastic Polyurethane Derived from Polylactic Acid with High-Damping Performance

Mechanical dependence of 3D-printed thermoplastic polyurethane reinforced with minor continuous carbon fibres

Crystallizable and Tough Aliphatic Thermoplastic Polyureas Synthesized Through a Nonisocyanate Route

Direct ink writing-based additive manufacturing of thermoplastic elastomeric materials

Improvement of the Thermal Conductivity and Mechanical Properties of 3D-Printed Polyurethane Composites by Incorporating Hydroxylated Boron Nitride Functional Fillers

An insight into the tensile anisotropy of 3D-printed thermoplastic polyurethane