Abstract:Computational and experimental studies were conducted to investigate the conjugated convective heat transfer produced by single row of impinging jets inside a confined channel with non-uniform initial crossflow issued from discrete holes. The effects of the crossflow-to-jet Reynolds number ratio and crossflow holes arrangement (inline or staggered in relative to the impinging jet holes) on the jet impingement behaviors were studied providing the same total cooling air mass flowrate. Particular attention was paid to examine the tab-excited jet impingement behaviors in a confined channel with non-uniform crossflow. The results show that the tabbed excitation on the improvement of convective heat transfer in the vicinity of impingement region is not as well as the situation where no initial crossflow is present. For the inline arrangement of crossflow holes, the location corresponding to the peak laterally-averaged Nusselt number is moved downstream and the peak laterally-averaged Nusselt number is decreased significantly under larger crossflow-to-jet Reynolds number ratios. While for the staggered arrangement of crossflow holes, the location corresponding to the peak laterally-averaged Nusselt number is not affected by the crossflow but the peak laterally-averaged Nusselt number is decreased monotonously with the increase of crossflow-to-jet Reynolds number ratio. Under small crossflow-to-jet Reynolds number ratio, the initial crossflow arrangement has little influence on the laterally-averaged Nusselt number distribution. Among three crossflow-to-jet Reynolds number ratios ranged from 0.5 to 2, the maximum relative difference of peak laterally-averaged Nusselt numbers between two different crossflow arrangements is occurred under crossflow-to-jet Reynolds number ratio of 1.

Convective heat transfer of a row of air jets impingement excited by triangular tabs in a confined crossflow channel

Flow and Heat Transfer Characteristics in a Microchannel with a Circular Synthetic Jet

Jet Impingement Heat Transfer Characteristics with Variable Extended Jet Holes under Strong Crossflow Conditions

Movement of Impingement Heat Transfer by A Single Circular Jet with A Confined Wall

Experimental and Numerical Investigations of Extended Jet Effects on Multiple-Jet Impingement Heat Transfer Characteristics

Heat Transfer Distribution of Single Oblique Jet Impingement in Crossflow under Different Inlet Conditions

Numerical Investigation on Conjugate Heat Transfer of Impingement/effusion Double-Wall Cooling with Different Crossflow Schemes

Convective heat transfer of jet impingement inside semi-confined channel

On heat transfer and flow characteristics of jets impinging onto concave surface with varying bleeding arrangements

Numerical Study on Heat Transfer Characteristics of Jet Array Impingement

Experimental Investigation of Local and Average Heat Transfer Coefficients under an Inline Impinging Jet Array, Including Jets with Low Impingement Distance and Inclined Angle

Heat Transfer and Flow Characteristics of the Jet Array Impingement

Jet Impingement Heat Transfer in Narrow Channels with Different Pin Fin Configurations on Target Surfaces

Effect of Crossflow Regulation by Varying Jet Diameters in Streamwise Direction on Jet Impingement Heat Transfer under Maximum Crossflow Condition

Numerical Study on Flow and Heat Transfer Characteristics of 3D Turbulent Impinging Jets

Numerical Study On Flow And Heat Transfer Characteristics Of Jet Impingement

Effect Of Narrow Jet Spacing On Impinging Flow And Heat Transfer

On heat transfer and flow characteristics of jets impingement on a concave surface with varying pin-fin arrangements

An experimental study of impingement cooling on latticework in a wide channel

Effect of the Nozzle Geometry on Flow Field and Heat Transfer in Annular Jet Impingement

On heat transfer and flow characteristics of jets impinging onto a concave surface with varying jet arrangements