Abstract:Dissolving-grade pulps serve as the primary material for producing regenerated cellulose fibers, and their utilization is steadily increasing. Despite extensive research efforts, it remains necessary to deepen our understanding of the inherent factors that impact pulp reactivity apart from the well-known degree of polymerization. The Fock reactivity test is commonly used to quantify the reactivity of cellulose pulp by measuring the percentage of cellulose that reacts with carbon disulfide. Dissolving pulps typically require a reactivity of over 90%. Hemicellulose content, intrinsic viscosity, cell wall porosity, crystallinity, and accessible area of four different pulps were characterized and distinct treatments were employed to try to separate the effect of different pulp properties and assess their effect on Fock reactivity. Hemicelluloses removal by xylanase and cold caustic treatments (86% removal) increased the Fock reactivity by 30%, from 55.7% to 71.3%. Assuming the hemicelluloses are fully accessible by the CS 2 , cellulose reactivity increased from 35.6% to 69.5%,but at the expense of an intrinsic viscosity decrease from 990 cm 3 /g to 689 cm 3 /g. This unexpected intrinsic viscosity decrease can be due to the cellulose de-shielding effect provoked by hemicellulose removal and some cellulose degradation during cold caustic extraction. Vibrational impact ball-milling applied on a pulp with 5% hemicellulose content notably boosted Fock reactivity by 56%, from 54% to 84.5%, but two pulp properties, intrinsic viscosity, and crystallinity, decreased concurrently due to the high-energy treatment. This phenomenon complicates identifying a direct correlation between heightened reactivity and a single parameter. To address this, endoglucanase treatment was used to separate intrinsic viscosity from crystallinity, clarifying their contributions to changes in Fock reactivity. Unfortunately, the effect of a given physical or bio/chemical pulp treatment affects more than one pulp property, always including the cellulose degree of polymerization, which has made it difficult to isolate the pulp properties that affect Fock reactivity. Several processes have been tested to obtain pulp with dissolving potential.

Rapid Determination of the Reactivity of Dissolving Pulps by Reaction-Based Headspace Gas Chromatography

Analysis of P-Xylene Oxidation Products by Micellar Electrokinetic Capillary Chromatography and Gas Chromatography

Cellulose Modification by Recyclable Swelling Solvents

Evaluation of Xylooligosaccharide Production from Residual Hemicelluloses of Dissolving Pulp by Acid and Enzymatic Hydrolysis

Rapid quantitative detection of glucose content in glucose injection by reaction headspace gas chromatography

More than 1470 manuscripts have been submitted to Ecology in 2014, up about 6% from 2013.

Establishing New Methodology for Determining Water Absorbability of Cellulose-Derived Materials via Vapor-Monitoring Headspace Strategy

An improved, less erroneous protocol for the classical “cuen”, “cuoxam” or “cadoxen” viscosity measurements of pulps

Effect of eucalyptus globulus pulp properties on fock reactivity

Periodate-chlorite oxidation for dicarboxylcellulose (DCC) production: activation strategies for the dissolution and visualization of oxidized groups distribution

Effect of the Dissolving Method on the Dissolution of Dissolving Pulp Cellulose Fibers with Different Dried-States in Different NaOH/Additives Aqueous Solutions

High-throughput monitoring of biomass conversion reaction with automatic time-resolved analysis

Upgrading paper-grade bleached hardwood pulp towards dissolving pulp using γ-valerolactone

Rapid Measurement of Gas Solubility in Liquids Using a Membrane Dispersion Microcontactor

Dissolution kinetics of cellulose in ionic solvents by polarized light microscopy

A simple and efficient headspace gas chromatographic method for the determination of carboxyl groups in nanofibrillated cellulose

Conversion of bleached soda bagasse paper-grade pulp to dissolving-grade pulp using different hemicelluloses removing post-treatments with emphasis on IONCELL-P process

A high-performance anion-exchange chromatographic method for the fast analysis and precise determination of varied glucose-derived acids during biomass biorefinery

Quantitative analysis of total starch content in wheat flour by reaction headspace gas chromatography

Effects of Caustic Extraction on Properties of Viscose Grade Dissolving Pulp

Novel Methodology for Lignocellulose Composition, Polymorphism and Crystallinity Analysis Via Deconvolution of Differential Thermogravimetry Data