Abstract:The human hand plays a role in a variety of daily activities. This intricate instrument is vulnerable to trauma or neuromuscular disorders. Wearable robotic exoskeletons are an advanced technology with the potential to remarkably promote the recovery of hand function. However, the still face persistent challenges in mechanical and functional integration, with real-time control of the multiactuators in accordance with the motion intentions of the user being a particular sticking point. In this study, we demonstrated a newly-designed wearable robotic hand exoskeleton with multijoints, more degrees of freedom (DOFs), and a larger range of motion (ROM). The exoskeleton hand comprises six linear actuators (two for the thumb and the other four for the fingers) and can realize both independent movements of each digit and coordinative movement involving multiple fingers for grasp and pinch. The kinematic parameters of the hand exoskeleton were analyzed by a motion capture system. The exoskeleton showed higher ROM of the proximal interphalangeal and distal interphalangeal joints compared with the other exoskeletons. Five classifiers including support vector machine (SVM), K-near neighbor (KNN), decision tree (DT), multilayer perceptron (MLP), and multichannel convolutional neural networks (multichannel CNN) were compared for the offline classification. The SVM and KNN had a higher accuracy than the others, reaching up to 99%. For the online classification, three out of the five subjects showed an accuracy of about 80%, and one subject showed an accuracy over 90%. These results suggest that the new wearable exoskeleton could facilitate hand rehabilitation for a larger ROM and higher dexterity and could be controlled according to the motion intention of the subjects.

Discrete Motion Prediction Based on EMG Signals

An Upper-Limb Power-Assist Exoskeleton Using Proportional Myoelectric Control

Training Wrist Extensor Function and Detecting Unwanted Movement Strategies in an EMG-controlled Visuomotor Task.

A Real-Time Control Method for Upper Limb Exoskeleton Based on Active Torque Prediction Model.

Continuous Prediction of Lower-Limb Kinematics From Multi-Modal Biomedical Signals

Real time motion intention recognition method with limited number of surface electromyography sensors for A 7-DOF hand/wrist rehabilitation exoskeleton

Functional Variable Selection for EMG-based Control of a Robotic Hand Prosthetic

Real-Time Prediction of Elbow Motion Through sEMG-Based Hybrid BP-LSTM Network

Real-Time Control of an Exoskeleton Hand Robot with Myoelectric Pattern Recognition

Differentiated time-frequency characteristics based real-time motion decoding for lower extremity rehabilitation exoskeleton robot

Hybrid Rehabilitation System with Motion Estimation Based on EMG Signals

A low-cost and portable wrist exoskeleton using EEG-sEMG combined strategy for prolonged active rehabilitation

Control of Newly-Designed Wearable Robotic Hand Exoskeleton Based on Surface Electromyographic Signals

A Novel Wrist Joint Torque Prediction Method Based on EMG and LSTM

A Practical and Adaptive Method to Achieve EMG-Based Torque Estimation for a Robotic Exoskeleton

Improving the Transparency of an Exoskeleton Knee Joint Based on the Understanding of Motor Intent Using Energy Kernel Method of EMG

Research advance on key technology of EMG-based Control for Hand Exoskeleton Robots

Control Method of a 5 DOF Wearable Rehabilitation Robot for Upper Limb

A Novel Method for Detecting Misclassifications of the Locomotion Mode in Lower-Limb Exoskeleton Robot Control

An EMG-Based Deep Learning Approach for Multi-DOF Wrist Movement Decoding

Motion intensity modeling and trajectory control of upper limb rehabilitation exoskeleton robot based on multi-modal information