Abstract:The choice of torque curve in lower-limb enhanced exoskeleton robots is a key problem in the control of lower-limb exoskeleton robots. As a human–machine coupled system, mapping from sensor data to joint torque is complex and non-linear, making it difficult to accurately model using mathematical tools. In this research study, the knee torque data of an exoskeleton robot climbing up stairs were obtained using an optical motion-capture system and three-dimensional force-measuring tables, and the inertial measurement unit (IMU) data of the lower limbs of the exoskeleton robot were simultaneously collected. Nonlinear approximations can be learned using machine learning methods. In this research study, a multivariate network model combining CNN and LSTM was used for nonlinear regression forecasting, and a knee joint torque-control model was obtained. Due to delays in mechanical transmission, communication, and the bottom controller, the actual torque curve will lag behind the theoretical curve. In order to compensate for these delays, different time shifts of the torque curve were carried out in the model-training stage to produce different control models. The above model was applied to a lightweight knee exoskeleton robot. The performance of the exoskeleton robot was evaluated using surface electromyography (sEMG) experiments, and the effects of different time-shifting parameters on the performance were compared. During testing, the sEMG activity of the rectus femoris (RF) decreased by 20.87%, while the sEMG activity of the vastus medialis (VM) increased by 17.45%. The experimental results verify the effectiveness of this control model in assisting knee joints in climbing up stairs.

A Practical and Adaptive Method to Achieve EMG-Based Torque Estimation for a Robotic Exoskeleton

THE INFLUENCE OF TORQUE AND ELBOW POSITION ON WRIST ROTATE ANGLE RECOGNITION BASED SURFACE ELECTROMYOGRAM

A Real-Time Control Method for Upper Limb Exoskeleton Based on Active Torque Prediction Model.

Electromyography-Driven Progressive Assist-as-Needed Control for Lower Limb Exoskeleton

Design of Elbow Rehabilitation Exoskeleton Robot with Semg-Based Torque Estimation Control Strategy

Optimization of Torque-Control Model for Quasi-Direct-Drive Knee Exoskeleton Robots Based on Regression Forecasting

Time-delay Estimation Based Computed Torque Control with Robust Adaptive RBF Neural Network Compensator for a Rehabilitation Exoskeleton.

Force Myography based Torque Estimation in Human Knee and Ankle Joints

EMG-to-torque models for exoskeleton assistance: a framework for the evaluation of in situ calibration

sEMG-Based Joint Force Control for an Upper-Limb Power-Assist Exoskeleton Robot

A Subject-Specific EMG-Driven Musculoskeletal Model for Applications in Lower-Limb Rehabilitation Robotics

Adaptive Computed Torque Control Based on RBF Network for a Lower Limb Exoskeleton

Compliant Training Control of Ankle Joint by Exoskeleton with Human EMG-torque Interface

EMG-Based Continuous and Simultaneous Estimation of Arm Kinematics in Able-Bodied Individuals and Stroke Survivors

Active Interaction Exercise Control of Exoskeleton Upper Limb Rehabilitation Robot Using Model-free Adaptive Methods

Adaptive Cooperative Control Strategy for a Wrist Exoskeleton Using Model-Based Joint Impedance Estimation

Voluntary Control of an Ankle Joint Exoskeleton by Able-Bodied Individuals and Stroke Survivors Using EMG-Based Admittance Control Scheme

Neural Network Robust Control Based on Computed Torque for Lower Limb Exoskeleton

Towards Online Estimation of Human Joint Muscular Torque with a Lower Limb Exoskeleton Robot

Human-robot Cooperative Control Based on Semg for the Upper Limb Exoskeleton Robot

Optimized Impedance Control of a Lightweight Gait Rehabilitation Exoskeleton Based on Accurate Knee Joint Torque Estimation