Abstract:BackgroundMyoelectric pattern recognition systems can decode movement intention to drive upper-limb prostheses. Despite recent advances in academic research, the commercial adoption of such systems remains low. This limitation is mainly due to the lack of classification robustness and a simultaneous requirement for a large number of electromyogram (EMG) electrodes. We propose to address these two issues by using a multi-modal approach which combines surface electromyography (sEMG) with inertial measurements (IMs) and an appropriate training data collection paradigm. We demonstrate that this can significantly improve classification performance as compared to conventional techniques exclusively based on sEMG signals.MethodsWe collected and analyzed a large dataset comprising recordings with 20 able-bodied and two amputee participants executing 40 movements. Additionally, we conducted a novel real-time prosthetic hand control experiment with 11 able-bodied subjects and an amputee by using a state-of-the-art commercial prosthetic hand. A systematic performance comparison was carried out to investigate the potential benefit of incorporating IMs in prosthetic hand control.ResultsThe inclusion of IM data improved performance significantly, by increasing classification accuracy (CA) in the offline analysis and improving completion rates (CRs) in the real-time experiment. Our findings were consistent across able-bodied and amputee subjects. Integrating the sEMG electrodes and IM sensors within a single sensor package enabled us to achieve high-level performance by using on average 4-6 sensors.ConclusionsThe results from our experiments suggest that IMs can form an excellent complimentary source signal for upper-limb myoelectric prostheses. We trust that multi-modal control solutions have the potential of improving the usability of upper-extremity prostheses in real-life applications.

Real-Time Control of an Exoskeleton Hand Robot with Myoelectric Pattern Recognition

Research on the Control Method of an Upper-limb Rehabilitation Exoskeleton Based on Classification of Motor Imagery EEG

An Upper-Limb Power-Assist Exoskeleton Using Proportional Myoelectric Control

Offline and online myoelectric pattern recognition analysis and real-time control of a robotic hand after spinal cord injury

Control of a Soft Medical Exoskeleton via a Bio-inspired Approach

Control of Newly-Designed Wearable Robotic Hand Exoskeleton Based on Surface Electromyographic Signals

Myoelectric Pattern Recognition for Controlling a Robotic Hand: A Feasibility Study in Stroke

A Brain-Machine Interface Based on ERD/ERS for an Upper-Limb Exoskeleton Control

Research advance on key technology of EMG-based Control for Hand Exoskeleton Robots

EMG Pattern Classification to Control a Hand Orthosis for Functional Grasp Assistance after Stroke

Training Wrist Extensor Function and Detecting Unwanted Movement Strategies in an EMG-controlled Visuomotor Task.

Myoelectric Control of a Soft Hand Exoskeleton Using Kinematic Synergies

Real time motion intention recognition method with limited number of surface electromyography sensors for A 7-DOF hand/wrist rehabilitation exoskeleton

Patient-Active Control of a Powered Exoskeleton Targeting Upper Limb Rehabilitation Training

Hand Exoskeleton Control for Cerebrum Plasticity Training Based on Brain-Computer Interface

A survey on sEMG control strategies of wearable hand exoskeleton for rehabilitation

Development, Dynamic Modeling, and Multi-Modal Control of a Therapeutic Exoskeleton for Upper Limb Rehabilitation Training

Motion intensity modeling and trajectory control of upper limb rehabilitation exoskeleton robot based on multi-modal information

Soft Exoskeleton Glove for Hand Assistance Based on Human-machine Interaction and Machine Learning

Improved prosthetic hand control with concurrent use of myoelectric and inertial measurements

Brain-Controlled Hand Exoskeleton Based on Augmented Reality-Fused Stimulus Paradigm