Abstract:Improving the mixing homogeneity of heterogeneous powder in real time plays an essential role in ensuring the forming quality of functionally graded materials (FGM) produced by laser-directed energy deposition (L-DED). In order to achieve a high performance of material composition and proportion control as forming FGM parts, this paper investigates the mixing mechanism of several typical powders including 316L and NiCrCoAlY used for the L-DED process driven by compressed gas. An innovative pneumatic powder mixer is designed and optimized by the CFD-DEM simulation method to analyze the mixing characteristics of heterogeneous particles. To improve the real-time mixing homogeneity of different mixing ratios in the conveying process, mixing experiments based on differences in powder properties were conducted by the additive-subtractive composite machining center, and a coefficient of variation method was proposed to describe the mixing homogeneity of non-uniform powders. The results of micro-morphology and EDS indicate that the mixing quality of the two-phase flow is significantly enhanced with the four 45° compression inlets and 2 m/s inlet velocity structure. The results show that the numerical analysis method proposed in this paper can effectively describe the mixing law of heterogeneous particles, and the compressed air intake velocity should not exceed the initial two-phase flow velocity. The horizontal and vertical components generated by the compressed air intake at 45° are more conducive to the formation of favorable perturbations to the two-phase flow, and the number of four and eight compressed air intakes that act uniformly on the flow field is more appropriate. After a certain period of time, the two-phase flow with low error of mixed powder quality can be produced continuously. The mixed powder quality is obviously improved after the disturbance of compressed air intake. The mixing uniformity of powder with low spherical particle proportion can be effectively improved by increasing the preset mixing proportion of non-spherical particles.

Research of Filling Ratio and Fluidization Performance of Dense-Packing Aluminum Powder

Research Progress of Granular Flow and Fluidization Behavior of Coarse Cohesive Particles

Numerical investigation on the densification of granulated porous indium tin oxide powders before compaction

Analysis of Factors Influencing Fluidization Characteristics in Dense Phase Powder Feeder

Effect of Aluminium Content and Processing Parameters on the Microstructure and Mechanical Properties of Laser Powder-Bed Fused Magnesium-Aluminium (0, 3, 6, 9wt%) Powder Mixture

A Coupled DEM/CFD Analysis of Die Filling Process

Numerical simulation of the flow behavior and powder spreading mechanism in powder bed-based additive manufacturing

Evaluation of powder mixing homogeneity for laser-directed energy deposition (L-DED) of functionally graded materials

Experimental study on dynamic response of micron aluminum powder

Revealing the Mechanisms for the Nucleation and Formation of Equiaxed Grains in Commercial Purity Aluminum by Fluid-Solid Coupling Induced by a Pulsed Magnetic Field

Comprehensive evaluation of powder flowability for additive manufacturing using principal component analysis

Reinforcement Effect of Fly Ash with Different Morphologies on Aluminum Foam Prepared Via Powder Metallurgy

Simulation and Experimental Investigation of Fe-based Alloy Powder Production by Gas Atomization

Influence of powder size on defect generation in laser powder bed fusion of AlSi10Mg alloy

Investigation on reduction in compaction of ultrasonic vibration-assisted powder feeding for additive manufacturing

Investigation of nozzle two-phase flow characteristics for nanometer aluminum powder combustion in a metal fuel motor

Study on solid-liquid transition behaviors of cohesive powders and predict the critical arch-breaking gas flow rate

Influence of Process Parameters on Filling Ability of A356 Aluminium Alloy in Expendable Pattern Shell Casting with Vacuum and Low Pressure

Estimation of the effect of rotational speed on flow and mixing quality of particles with different shapes in a rotary drum

Morphology and structure characterization of hollow granule mold powder for continuous casting

Powder flowability characterisation at preheating temperature in additive manufacturing