Abstract:[Abstract] Coupled aerodynamic and structural optimization is performed for the preliminary design of a high-subsonic transport-aircraft wing using surrogate models. The aerodynamic performance of wing/body combination in transonic flow is calculated with full-potential equation in conjunction with viscous correction method. Structural analysis is performed using finite-element method (FEM) to obtain stress and deform distribution. The span, taper ratio, sweep angle and linear twist angle are chosen as design variables that define the aerodynamic configuration of the wing. And another four representing thicknesses of spars and skin are selected as the design variables for structural discipline. After the aeroelastic analysis of the various candidate wings, the aerodynamic and structural performances are obtained such as the lift coefficient, the drag coefficient, and the deformation and equivalent stress of the wing. Based on these sample data, the approximation models for analyzing the aerodynamic and structural performances are established using surrogate models including quadratic response surface method (RSM), kriging model (KM) and radial-basis function (RBF) Network. The modeling accuracy is evaluated by numerical-error analysis. We aim to select the approximation models with best accuracy to replace the complicated and time-consuming analysis in optimization. It is found that KM and RSM has comparative high accuracy and both are more accurate than RBF. Multi-objective optimization for the supercritical wing is performed based on RSM, for maximizing lift-to-drag ratio and minimizing weight. And the optimization is constrained by lift, reference area, deform, equivalent stress. The performance of the optimal design is proven to be improved based on the initial design. And compared with the optimal design without considering aeroelastic effect, lift-to-drag ratio is increased by 5.77% and lift is increased by 19.55%. It is proven by practice that considering aeroelastic effect is necessary in priliminary design of aircraft when optimizing high-aspect-ratio wing.

A Study of Multi-Objective Aerodynamic Optimization Design for Variable Camber Airfoils and High Lift Devices

Multiobjective Shape Optimization of A Hypersonic Lifting Body Using A Correlation-Based Transition Model

Aerodynamic Optimization Design of Airfoil Configurations Based on Cascade Feedforward Neural Network

Multi-objective Optimization Design for Airfoils with High Lift-to-drag Ratio Based on Geometric Feature Control

Multi-point Aerodynamic Optimization Design Strategy of Rotor Airfoil With Multi-constrain Conditions

Two-stage aerodynamic optimization method based on early termination of CFD convergence and variable-fidelity model

Multi-point/objective Optimization Design of High Lift-to-drag Ratio for NLF Airfoils

Multi-objective Aerodynamic Design Optimization of a Flying Wing usin g Su rrogate Model

Multi-point/Objective Design of Low-speed Airfoils Using Optimization

Multi-Objective Optimization Design of Liftbody Aircraft Using Kriging Model

Multidisciplinary Optimization of Transonic Wing Using Evolutionary Algorithm

Optimization Design of Airfoil Based on Hybrid Genetic Algorithm and Compound Form Method

Multi-objective Aerodynamic Design Optimization of Rotor Airfoils Using an Efficient Surrogate-Based Algorithm

Aerodynamic Optimization Method Based on Bezier Curve and Radial Basis Function

Multi-objective and Multi-constrained Optimization Design for a Helicopter Rotor Airfoil

Multi-Objective Aerodynamic Design Optimization Based On Camber Line And Thickness Distribution For A Transonic Compressor Rotor

Global aerodynamic optimization method using genetic algorithms and surrogate model

Aerodynamic Optimization Design of Airfoil and Wing

Coupled Aerodynamic/Structural Optimization of a Subsonic Transport Wing Using a Surrogate Model

Opotimization Design of High-Lift Laminar Airfoil for General Aircraft

Aerodynamic Design Optimization of Cascade Airfoils Based on Multiobjective Genetic Algorithm