Abstract:A robust multi-objective wing design optimization procedure using CFD is presented in this work. Instead of directly applying CFD to wing design optimization, a Kriging aerodynamic model that approximates CFD result is proposed to save computational cost. By introducing 6 sigma robust approach as a sub-objective function, multi-objective wing design problems can be solved with aerodynamic robustness. Non-Uniform Rational B-Spline curves (NURBS) are introduced to depict the wing geometry in design optimization process. The most important parameters of the wing geometry can then be screened by design of experiment and treated as design variables due to the local variation property of NURBS. Under this formulation, a multi-objective genetic algorithm based on non-dominated sorting is employed to handle multiple flight conditions in wing design. The optimum wing geometry is selected according to trade-off among design objects on the non-dominated front. To validate the proposed approach, two robust design optimization cases are studied for ONERA-M6-Wing. It turns out that the drag coefficient is insensitive to Mach number between Ma0.8-Ma0.9 after robust optimization. The result also verifies the effectiveness of our method in boosting performance and robustness of multiple flight conditions: the lift curve slope (Ma0.3) of optimum wing and the 6 sigma objective function of transonic drag (Ma0.8-Ma0.9) increase by 11.9% and 25.4%, respectively. Observations in the optimization cases are concluded as follows: 1) For wing aerodynamic design problems, the multi-objective robust optimization can both improve the performance at different flight conditions and provide robustness. 2) The Kriging aerodynamic model derived from CFD result can satisfy the precision requirement of wing design. 3) Even though the optimization result is subject to the weights of the 6 sigma function in sub-object, the influence is not comparable to the trade-off among design objects. 4) The optimum solution obtained by proposed approach is superior to gradient based optimization method, while the computational cost is acceptable.

Multi-point aerodynamic optimization design of a dual-aisle airplane wing

Multi-point aero-structural design optimization of wings considering drag-divergence constraints

Multidisciplinary Optimization of Transonic Wing Using Evolutionary Algorithm

Multi-point Aerodynamic Optimization Design Strategy of Rotor Airfoil With Multi-constrain Conditions

Supercritical Wing Design and Optimization for Transonic Civil Airplane

Multi-objective Aerodynamic Design Optimization of a Flying Wing usin g Su rrogate Model

Multi-objective Optimization Design for Airfoils with High Lift-to-drag Ratio Based on Geometric Feature Control

Robust Multi-Objective Wing Design Optimization Via Cfd Approximation Model

Aerodynamic Design of the Supersonic Aircraft Wing-Shape and Wing-Twist Optimization

Aerodynamic Optimization Method Based on Bezier Curve and Radial Basis Function

Multi-point/objective Optimization Design of High Lift-to-drag Ratio for NLF Airfoils

An Aerodynamic Shape Optimization of Transonic Wing Design Method for Aeroelastic System

Aircraft Wing Structural Design Optimization Based on Automated Finite Element Modelling and Ground Structure Approach

Aerodynamic-structure Multidisciplinary Optimization Design of Wing Based on Response Surface Methodology

A Practical Optimization Design Method for Transport Aircraft Wing/Nacelle Integration

Study on Multimodality in Aerodynamic Airfoil Optimization Design

Inverse Design for Wing of Multi-point Aerodynamic Based on Adjoint Method

An Inverse Design Method for Wing Shape Optimization Guided by Spanwise Lift Distribution

Aero-structural Optimization of Supersonic Wing under Thermal Environment Using Adjoint-Based Optimization Algorithm

Supercritical Wing Aerodynamic Optimization Based on Multi-Strategy Method

Multiobjective aerostructural optimization for efficient transport wing conceptual design