Structural Evolution of Amorphous Calcium Sulfate Nanoparticles into Crystalline Gypsum Phase

Caiyun Jia,Luchao Wu,Qiaoshan Chen,Peng Ke,James J. De Yoreo,Baohong Guan

DOI: https://doi.org/10.1039/d0ce01173h

IF: 3.756

2020-01-01

CrystEngComm

Abstract:Growth and orientation of nanocrystalline domains within fused ACS particles generate monocrystalline gypsum phase.

What problem does this paper attempt to address?

Structural Characteristics of Amorphous Calcium Sulfate: Evidence to the Role of Water Molecules

Caiyun Jia,Luchao Wu,John L. Fulton,Xinran Liang,James J. De Yoreo,Baohong Guan

DOI: https://doi.org/10.1021/acs.jpcc.0c10016

IF: 4.177

2021-01-01

The Journal of Physical Chemistry

Abstract:Amorphous calcium sulfate (ACS) is intimately involved in the crystallization of calcium sulfate minerals, a major contributor to sulfur sequestration and a technological hindrance of scale formation, but its structural characteristics remain largely undiscovered. Here, we studied the structure of ACS nanoparticles captured under low CaSO4 concentration conditions. The ACS nanoparticles have a proto-gypsum property ranging from short-range to medium-range order, and water molecules are key structural constituents that are in a disordered state and 8-fold coordinated with Ca in the first coordination shell. More importantly, on a molecular scale, we give evidence concerning the energetic role of water molecules in promoting ions transport, molecule rearrangement, and development of a local coordination environment that facilitates structural evolution of ACS. This work reveals some important structural characteristics of ACS and has significance in providing a better understanding of the crystallization and biomineralization of water-bearing minerals.
Formation of spherical calcium sulfate mesocrystals: orientation controlled by subunit growth

Qiaoshan Chen,Luchao Wu,Yaxiong Zeng,Caiyun Jia,Junming Lin,Matthew Z. Yates,Baohong Guan

DOI: https://doi.org/10.1039/c9ce00982e

IF: 3.756

2019-01-01

CrystEngComm

Abstract:The design and synthesis of highly ordered and oriented hierarchical structures such as mesocrystals is of great interest due to their superior performance. However, the orientation mechanism is not yet fully understood. Here, we report a subcrystallite growth controlled orientation process to synthesize anisotropic alpha-calcium sulfate hemihydrate (alpha-HH) spherical mesocrystals in a Na(2)EDTA-containing ethylene glycol-water system. The spherical mesocrystals consist of rod-like nanoparticles with parallel crystallographic alignment along the c-axis. The time-dependent experiments indicate that the growth of subcrystallites after self-assembly is crucial for mesocrystal formation, which changes the subunits from an irregular shape to a uniform rod-like shape and synchronously aligns them in the same direction. The crystalline growth of subunits mainly results from the supply of lattice ions released from Ca-EDTA complexes. The cross-section observation reveals that the growth and orientation of the subcrystallites start exteriorly and proceed inward step by step. This work deepens the understanding of mesocrystal formation and opens up a potential way for the design and synthesis of complex and highly ordered structures.
The structure of CaSO4 nanorods -- the precursor of gypsum

Tomasz M. Stawski,Alexander E. S. Van Driessche,Rogier Besselink,Emily H. Byrne,Paolo Raiteri,Julian D. Gale,Liane G. Benning,Alexander E.S. Van Driessche

DOI: https://doi.org/10.48550/arXiv.1904.01007

2019-04-01

Materials Science

Abstract:Understanding the gypsum (CaSO4.2H2O) formation pathway from aqueous solution has been the subject of intensive research in the past years. This interest stems from the fact that gypsum appears to fall into a broader category of crystalline materials whose formation does not follow classical nucleation and growth theories. The pathways involve transitory precursor cluster species, yet the actual structural properties of such clusters are not very well understood. Here, we show how in situ high-energy X-ray diffraction experiments and molecular dynamics (MD) simulations can be combined to derive the structure of small CaSO4 clusters, which are precursors of crystalline gypsum. We fitted several plausible structures to the derived pair distribution functions and explored their dynamic properties using unbiased MD simulations based on both rigid ion and polarizable force fields. Determination of the structure and (meta)stability of the primary species is important from both a fundamental and applied perspective; for example, this will allow for an improved design of additives for greater control of the nucleation pathway.
Particle-Mediated Nucleation Pathways Are Imprinted in the Internal Structure of Calcium Sulfate Single Crystals

Tomasz M. Stawski,Helen M. Freeman,Alexander E. S. Van Driessche,Jörn Hövelmann,Rogier Besselink,Richard Wirth,Liane G. Benning

DOI: https://doi.org/10.1021/acs.cgd.9b00066

2019-06-11

Abstract:Calcium sulfate minerals are found in nature as three hydrates: gypsum (CaSO4·2H2O), bassanite (CaSO4·0.5H2O), and anhydrite (CaSO4). Due to their relevance in natural and industrial processes, the formation pathways of calcium sulfates from aqueous solution have been the subject of intensive research, and there is a growing body of literature, suggesting that calcium sulfates form through nonclassical nanoparticle-mediated crystallization processes. We showed earlier (Stawski et al. Nat. Commun.2016, 7, 11177) that at the early stages in the precipitation reaction, calcium sulfate nanocrystals nucleate through the reorganization and coalescence of aggregates rather than through classical unit addition. Here, we used low-dose dark field (DF) transmission electron microscopy (TEM) and electron diffraction and document that these restructuring processes do not continue until a final near-perfectly homogeneous single crystal is obtained. Instead, we show that the growth process yields a final imperfect mesocrystal with an overall morphology resembling that of a single crystal, yet composed of smaller nanodomains. Our data reveal that organic-free calcium sulfate mesocrystals grown by a particle mediated-pathway may preserve in the final crystal structure a "memory" or "imprint" of their nonclassical nucleation process, something that has been overlooked until now. Furthermore, the nanoscale misalignment of the structural subunits within these crystals might propagate through the length-scales, which is potentially expressed macroscopically as misaligned zones/domains in large single crystals. This is akin to observations in some of the giant crystals from the Naica Mine, Chihuahua, Mexico.

chemistry, multidisciplinary,materials science,crystallography
α-Calcium Sulfate Hemihydrate Nanorods Synthesis: A Method for Nanoparticle Preparation by Mesocrystallization

Qiaoshan Chen,Caiyun Jia,Yu Li,Jie Xu,Baohong Guan,Matthew Z. Yates

DOI: https://doi.org/10.1021/acs.langmuir.7b00013

IF: 3.9

2017-01-01

Langmuir

Abstract:The past decades have witnessed great advances in nanotechnology since tremendous efforts have been devoted for the design, synthesis, and application of nano particles. However, for most mineral materials such as calcium sulfate, it is still a challenge to prepare their nanoparticles, especially with uniform size and high monodispersity. In this work, we report a route to regulate the morphology and structure of a-calcium sulfate hemihydrate (alpha-HH) and successfully synthesize and stabilize its mesocrystals for the first time. The ellipsoidal mesocrystals in length of 300-500 nm are composed by a-HH nanoparticles arranged in the same crystallographic fashion and interspaced with EDTA. The time-dependent experiments indicate the a-HH aggregates evolve from irregular structure to mesocrystal structure with the subsequent growth of subunits and then partially fuse into single crystals. Disorganizing the mesocrystal structure before the emergence of fusion reaps alpha-HH nanorods in a length of 30-80 nm and a width of 10-20 nm with high monodispersion. This ingenious concept paves an alternative way for nanoparticle preparation and is readily extended to other inorganic systems.
A Facile Method to Control the Structure and Morphology of Α-Calcium Sulfate Hemihydrate

Qiaoshan Chen,Guangming Jiang,Caiyun Jia,Hao Wang,Baohong Guan

DOI: https://doi.org/10.1039/c5ce01923k

IF: 3.756

2015-01-01

CrystEngComm

Abstract:Synergy effect of CaCl2 and Na2EDTA on the structure and morphology control of α-HH by regulating G/W.
Crystallization at Multiple Sites Inside Particles of Amorphous Calcium Phosphate

Chen-Guang Wang,Jia-Wang Liao,Bao-Di Gou,Jian Huang,Rui-Kang Tang,Jin-Hui Tao,Tian-Lan Zhang,Kui Wang

DOI: https://doi.org/10.1021/cg801069t

IF: 4.01

2009-01-01

Crystal Growth & Design

Abstract:Calcium phosphates are the main minerals in human bone, enamel, atherosclerosis, and dental calculus. Amorphous precursors may play a key role in biomineralization. We studied the formation and transformation of calcium phosphate particles of amorphous phase by stopped-flow spectrophotometry, simultaneous measurements of particle size and solution pH, and high-resolution transmission electron microscopy. Ion pairs and clusters formed in the first few seconds. They then constituted initial amorphous phase containing protonated phosphates and hydrated calcium ions, which was different from that containing Ca-9(PO4)(6). Crystalline domains developed at multiple sites inside the primary particles of the amorphous phase. With the consuming of interdomain constituents, these particles partially collapsed, liberating crystallites and inducing rapid precipitation. This study sheds new light on the understanding of crystallization in amorphous phase, as well as the induction period in precipitation kinetics.
Solid-State Phase Transformation and Self-Assembly of Amorphous Nanoparticles into Higher-Order Mineral Structures

Stanislas Von Euw,Thierry Azaïs,Viacheslav Manichev,Guillaume Laurent,Gérard Pehau-Arnaudet,Margarita Rivers,Nagarajan Murali,Daniel J Kelly,Paul G Falkowski

DOI: https://doi.org/10.1021/jacs.0c05591

2020-07-22

Abstract:Materials science has been informed by nonclassical pathways to crystallization, based on biological processes, about the fabrication of damage-tolerant composite materials. Various biomineralizing taxa, such as stony corals, deposit metastable, magnesium-rich, amorphous calcium carbonate nanoparticles that further assemble and transform into higher-order mineral structures. Here, we examine a similar process in abiogenic conditions using synthetic, amorphous calcium magnesium carbonate nanoparticles. Applying a combination of high-resolution imaging and in situ solid-state nuclear magnetic resonance spectroscopy, we reveal the underlying mechanism of the solid-state phase transformation of these amorphous nanoparticles into crystals under aqueous conditions. These amorphous nanoparticles are covered by a hydration shell of bound water molecules. Fast chemical exchanges occur: the hydrogens present within the nanoparticles exchange with the hydrogens from the surface-bound H2O molecules which, in turn, exchange with the hydrogens of the free H2O molecule of the surrounding aqueous medium. This cascade of chemical exchanges is associated with an enhanced mobility of the ions/molecules that compose the nanoparticles which, in turn, allow for their rearrangement into crystalline domains via solid-state transformation. Concurrently, the starting amorphous nanoparticles aggregate and form ordered mineral structures through crystal growth by particle attachment. Sphere-like aggregates and spindle-shaped structures were, respectively, formed from relatively high or low weights per volume of the same starting amorphous nanoparticles. These results offer promising prospects for exerting control over such a nonclassical pathway to crystallization to design mineral structures that could not be achieved through classical ion-by-ion growth.
Facile Synthesis and Properties Research of Single Crystal Calcium Sulfate Nanotubes Through Reverse Micelle Method

Yun Chen,Qingsheng Wu

DOI: https://doi.org/10.1016/j.colsurfa.2008.04.041

IF: 5.518

2008-01-01

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:Single crystal calcium sulfate nanotubes are controllably prepared via a facile reverse micelles method at room temperature. These nanotubes have diameters of about 20 nm and lengths of about 420 nm. XRD curves indicate that as-obtained nanotubes is end-centered monoclinic phase with lattice parameters of a = 6.284 Å, b = 15.193 Å and c = 5.680 Å, which is consistent with the values reported in JCPDS card no. 33-0311. Study on the optical properties of as obtained nanotubes shows that calcium sulfate nanotubes possess different optical properties from bulk counterpart. When reaction condition is controlled, nanorods with better crystallinity are obtained. A mechanism of the formation process is also discussed.
Trace NaCl and Na2EDTA Mediated Synthesis of Α-Calcium Sulfate Hemihydrate in Glycerol–Water Solution

Caiyun Jia,Qaoshan Chen,Xu Zhou,Hao Wang,Guangming Jiang,Baohong Guan

DOI: https://doi.org/10.1021/acs.iecr.6b02064

2016-01-01

Industrial & Engineering Chemistry Research

Abstract:We report a new class of glycerol–water system to transform FGD gypsum into α-calcium sulfate hemihydrate (α-HH) mediated by trace NaCl and Na2EDTA to regulate the phase transformation rate as well as the crystal morphology to achieve crystals with high mechanical strength. NaCl plays a role in accelerating the nucleation and crystal growth process, whereas Na2EDTA regulates the morphology of α-HH from columnar to lamellar. The paste made from columnar α-HH with higher aspect ratio deserves higher dry bending/compressive strength of 13.6/37.6 MPa, which is comparable with those prepared in nitrate–water medium, chloride–water medium, or by autoclave method. This study provides an improved alternative of glycerol–water system to transform FGD gypsum into α-HH with controlled morphology, high mechanical strength, and less corrosion to the equipment. We also establish the relationship between the mechanical strength of paste and the aspect ratio of α-HH crystals.
Hierarchical synchrotron diffraction and imaging study of the calcium sulfate hemihydrate–gypsum transformation

Michela La Bella,Rogier Besselink,Jonathan P. Wright,Alexander E. S. Van Driessche,Alejandro Fernandez-Martinez,Carlotta Giacobbe

DOI: https://doi.org/10.1107/S1600576723002881

IF: 4.868

2023-05-11

Journal of Applied Crystallography

Abstract:A combined approach of scanning 3D X‐ray diffraction and phase contrast tomography has been used to study the hydration of calcium sulfate hemihydrate to form gypsum. This approach was found to be a powerful tool that permitted – for the first time – coupling of detailed crystallographic and morphological information on the hemihydrate–gypsum transition observed in situ.The mechanism of hydration of calcium sulfate hemihydrate (CaSO4·0.5H2O) to form gypsum (CaSO4·2H2O) was studied by combining scanning 3D X‐ray diffraction (s3DXRD) and phase contrast tomography (PCT) to determine in situ the spatial and crystallographic relationship between these two phases. From s3DXRD measurements, the crystallographic structure, orientation and position of the crystalline grains in the sample during the hydration reaction were obtained, while the PCT reconstructions allowed visualization of the 3D shapes of the crystals during the reaction. This multi‐scale study unfolds structural and morphological evidence of the dissolution–precipitation process of the gypsum plaster system, providing insights into the reactivity of specific crystallographic facets of the hemihydrate. In this work, epitaxial growth of gypsum crystals on the hemihydrate grains was not observed.

chemistry, multidisciplinary,crystallography
Novel morphologies and phase transformation of CaCO3 crystals formed in CDS and urea aqueous solution

Zhaodong Nan,Qianqian Yang,Zhiying Chen

DOI: https://doi.org/10.1016/j.jcrysgro.2009.12.044

IF: 1.8

2010-01-01

Journal of Crystal Growth

Abstract:Calcium dodecyl sulfate (CDS) was used as an anionic surfactant and the source of calcium in the precipitation process of calcium carbonate (CaCO3) crystals. The calcium ions adsorbed onto the surface of CDS self-assemblies are used to simulate the selective enrichment and/or extraction of mineral elements in biomineralization. The polymorphic changes from pure vaterite to a mixture composed of calcite, vaterite, and aragonite, and to pure calcite, were found by changing concentration of urea. The as-obtained vaterite with tabular sphere-shaped, bicone-shaped, dumbbell-shaped and apple-like morphologies, and the calcite-shaped hexagonal platelet, were fabricated, respectively. The transforming processes from vaterite to calcite and aragonite, and from calcite to aragonite, were found. The synergistic effects of the concentration of CO32− and pH value, as well as anionic dodecyl sulfate and positive NH4+, were believed to play an important role in the morphologic selectivity and phase transformation from vaterite to calcite.
Shape-preserving Amorphous-to-crystalline Transformation of CaCO 3 Revealed by in Situ TEM

Zhaoming Liu,Zhisen Zhang,Zhe‐Ming Wang,Biao Jin,Dongsheng Li,Jinhui Tao,Ruikang Tang,James J. De Yoreo

DOI: https://doi.org/10.1073/pnas.1914813117

2020-01-01

Abstract:Organisms use inorganic ions and macromolecules to regulate crystallization from amorphous precursors, endowing natural biominerals with complex morphologies and enhanced properties. The mechanisms by which modifiers enable these shape-preserving transformations are poorly understood. We used in situ liquid-phase transmission electron microscopy to follow the evolution from amorphous calcium carbonate to calcite in the presence of additives. A combination of contrast analysis and infrared spectroscopy shows that Mg ions, which are widely present in seawater and biological fluids, alter the transformation pathway in a concentration-dependent manner. The ions bring excess (structural) water into the amorphous bulk so that a direct transformation is triggered by dehydration in the absence of morphological changes. Molecular dynamics simulations suggest Mg-incorporated water induces structural fluctuations, allowing transformation without the need to nucleate a separate crystal. Thus, the obtained calcite retains the original morphology of the amorphous state, biomimetically achieving the morphological control of crystals seen in biominerals.
Phase- and Morphology-Controlled Crystallization of Gypsum by Using Flue-Gas-desulfurization Gypsum Solid Waste

Xiaofei Zhang,Jinshu Wang,Junshu Wu,Xin-Jian Jia,Yucheng Du,Hongyi Li,Bingxin Zhao

DOI: https://doi.org/10.1016/j.jallcom.2016.03.021

IF: 6.2

2016-01-01

Journal of Alloys and Compounds

Abstract:In this work, we studied the phase- and morphology-controlled crystallization of gypsum by using flue-gas-desulfurization (FGD) gypsum source materials in HCl-H2O solution system at atmospheric pressure. The influence of the crystallization regulator sodium dodecyl sulfate (SDS) on the conversion process was examined. The results indicate that oxide impurities in FGD gypsum are removed by the treatment in this designed solution-phase system. Without the addition of SDS surfactant, calcium sulfate hemihydrate with fiber morphology is obtained and as the addition amount of SDS increases from 0.6 wt% to 5.4 wt%, the prepared sample transforms from column-like calcium sulfate hemihydrate to layer-structured calcium sulfate anhydrite. It is proposed that SDS selectively adsorbs on top (204) facet at a low SDS concentration (0.6 wt%), resulting in the decrease of aspect ratio compared with fiber-like calcium sulfate hemihydrate (without SDS addition). Layered SDS micelles are formed when 5.4 wt% SDS is added, and the soft template function, as well as the hydrophobic interaction of alkyl group in the surfactant, generates the layer-structured calcium sulfate anhydrite. The study provides a facile method for treating solid waste FGD gypsum. (C) 2016 Elsevier B.V. All rights reserved.
Crystallization of smooth amorphous calcium phosphate microspheres to core-shell hydroxyapatite microspheres

Mei-Li Qi,Zhaoxuan Long,Xiao-Cun Liu,Haijun Zhang,Jin Li,Shengkun Yao

DOI: https://doi.org/10.1039/d4ra04078c

2024-08-13

Abstract:Calcium phosphates (Ca-P) represent a significant class of biological minerals found in natural hard tissues. Crystallization through phase transformation of a metastable precursor is an effective strategy to guide the growth of crystalline Ca-P with exceptional functionality. Despite extensive research on Ca-P, the exact process during the crystallization of amorphous particles to hydroxyapatite (HA) remains elusive. Herein, pure HA microspheres with a core-shell structure are crystallized via dissolution and re-crystallization of smooth amorphous calcium phosphate (ACP) microspheres. The transformation is initiated with the increase of the hydrothermal treatment time in the presence of sodium trimetaphosphate and l-glutamic. The underlying mechanisms along with the kinetics of such transformation are explored. Nanocrystalline areas are formed on the smooth ACP microspheres and crystallization advances via nanometre-sized clusters formed by directional arrangement of nanocrystalline whiskers. Our findings shed light on a crucial but unclear stage in the genesis of HA crystals, specifically under the conditions of hydrothermal synthesis.
Amorphous 1-D nanowires of calcium phosphate/pyrophosphate: A demonstration of oriented self-growth of amorphous minerals

Chaobo Feng,Bing-Qiang Lu,Yunshan Fan,Haijian Ni,Yunfei Zhao,Shuo Tan,Zhi Zhou,Lijia Liu,Jordan A. Hachtel,Demie Kepaptsoglou,Baohu Wu,Denis Gebauer,Shisheng He,Feng Chen

DOI: https://doi.org/10.1016/j.jcis.2023.12.002

IF: 9.9

2023-12-04

Journal of Colloid and Interface Science

Abstract:Amorphous inorganic solids are traditionally isotropic, thus, it is believed that they only grow in a non-preferential way without the assistance of regulators, leading to the morphologies of nanospheres or irregular aggregates of nanoparticles. However, in the presence of (ortho)phosphate (Pi) and pyrophosphate ions (PPi) which have synergistic roles in biomineralization, the highly elongated amorphous nanowires (denoted ACPPNs) form in a regulator-free aqueous solution (without templates, additives, organics, etc). Based on thorough characterization and tracking of the formation process (e.g., Cryo-TEM, spherical aberration correction high resolution TEM, solid state NMR, high energy resolution monochromated STEM-EELS), the microstructure and its preferential growth behavior are elucidated. In ACPPNs, amorphous calcium orthophosphate and amorphous calcium pyrophosphate are distributed at separated but close sites. The ACPPNs grow via either the preferential attachment of ∼2 nm nanoclusters in a 1-dimension way, or the transformation of bigger nanoparticles, indicating an inherent driving force-governed process. We propose that the anisotropy of ACPPNs microstructure, which is corroborated experimentally, causes their oriented growth. This study proves that, unlike the conventional view, amorphous minerals can form via oriented growth without external regulation, demonstrating a novel insight into the structures and growth behaviors of amorphous minerals.

chemistry, physical
Microemulsion synthesis of anhydrous calcium sulfate nanowhiskers with calcium acetate solution and its surface structure stable and crystal phase evolution after modification

Shun Chen,Jianjian Fu,Xingyang He,Ying Su,Guoqing Xiong,Qiao Liu,Zhengyu Huang,Youzhi Jiang

DOI: https://doi.org/10.1007/s11051-020-04934-3

IF: 2.533

2020-07-01

Journal of Nanoparticle Research

Abstract:Methods obtaining gypsum whiskers via calcining dihydrate or hemihydrate gypsum perform high energy consumption. It also performs potential environmental impacts. New methods with energy-saving, high-efficiency, and environmentally friendly perform great challenges, which aim at fabricating gypsum whiskers even nanowhiskers. In this study, we used high-concentration calcium acetate solution and dilute sulfuric acid to fabricate anhydrite calcium sulfate nanowhiskers with microemulsion solution at room temperature. For further research on regulation and modification of its surface, calcium sulfates were modified by silicone quaternary ammonium salt and fatty acid methyl ester sulfonate in order to study their surface structure and crystal evolution during modification. After characterization, it indicated that the phase of calcium sulfate transmitted from anhydrite phase into dihydrite phase with a slight change on the surface layers. Benefiting from stability and activity properties of calcium sulfate nanowhiskers after modified, the compressive strength of cement paste with only 1% calcium sulfates performed increased absolutely 10.1% and 4.3% at conservation age of 3 days and 28 days.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Calcium Sulfate Polymorph Evolution Dominated by Competitive Nucleation in Gypsum Metastable Zone

Hailu Fu,Caiyun Jia,Qiaoshan Chen,Guangming Jiang

DOI: https://doi.org/10.1016/j.jcrysgro.2017.04.028

IF: 1.8

2017-01-01

Journal of Crystal Growth

Abstract:Calcium sulfate polymorph evolution during spontaneous precipitation was probed in 1.75m CaCl2 solutions at 85.0°C. Metastable calcium sulfate dihydrate (DH) and unstable α-hemihydrate (α-HH) precipitated concomitantly with the dominant phase presenting an order of DH→α-HH→DH upon supersaturation. Competitive nucleation assisted with heterogeneous nucleation of relatively less stable phase at lower supersaturations accounts for such a polymorph evolution. Lower interfacial energy and higher supersaturation result in the DH formation, while heterogeneous nucleation triggers the α-HH formation. Increment in CaCl2 concentration favors α-HH precipitation by decreasing the water activity and narrowing the supersaturation gap between DH and α-HH. This work presents a facile rule manipulating the polymorph evolution and provides a control strategy for selective synthesis of α-HH in industry.
Calcium carbonate crystals with different morphologies nucleated on the self-assembled monolayer

Qing Liu,Haishui Wang

DOI: https://doi.org/10.7503/cjcu20130628

2013-01-01

Abstract:One crystalline phase can exhibit different morphologies and growth orientations. Unit cell is the basic unit for the construction of crystals and the growth directions of the crystals are related to the macroscopic morphologies and properties of the crystals significantly. By combining the crystallography theory, experimental results and software simulation, we discussed the mechanism for the formation of different morphologies of calcium carbonate crystals nucleated on the self-assembled monolayer of L-cysteine. SEM images and XRD data demonstrated that the calcites from the(001) crystallographic plane are dominated. The structural match between the organic surface [the (root 3- root 3)R30 degrees structure] and that of the (001) crystal plane of calcite may account for the nucleation from these two planes.
In situ Observation of Structural Evolution and Phase Engineering of Amorphous Materials during Crystal Nucleation

Xiao Han,Geng Wu,Yiyao Ge,Shaokang Yang,Dewei Rao,Zhiyan Guo,Yan Zhang,Muyu Yan,Haoran Zhang,Lin Gu,Yuen Wu,Yue Lin,Hua Zhang,Xun Hong

DOI: https://doi.org/10.1002/adma.202206994

IF: 29.4

2022-10-14

Advanced Materials

Abstract:The nucleation pathway determines the structures and thus properties of the formed nanomaterials, which is governed by the free energy of the intermediate phase during nucleation. The amorphous structure, as one of the intermediate phases during nucleation, plays an important role in modulating the nucleation pathway. However, the process and mechanism of crystal nucleation from amorphous structures still need to be fully investigated. Here, we employ in situ aberration‐corrected high‐angle annular dark‐field scanning transmission electron microscopy (HAADF‐STEM) to conduct real‐time imaging of the nucleation of ultrathin amorphous nanosheets (NSs). Our results indcate that their nucleation contains three distinct stages, i.e., aggregation of atoms, crystallization to form lattice‐expanded nanocrystals, and relaxation of the lattice‐expanded nanocrystals to form final nanocrystals. In particular, we systematically investigate the crystallization processes of various amorphous materials to form corresponding nanocrystals with unconventional crystalline phases, including face‐centered cubic (fcc) Ru, hexagonal close‐packed (hcp) Rh and a new intermetallic IrCo alloy. In situ electron energy‐loss spectroscopy (EELS) analysis unveils that the doped carbon in the original amorphous NSs can migrate to the surface during the nucleation process, stabilizing the obtained unconventional crystal phases transformed from the amorphous structures, which is also proven by density functional theory (DFT) calculations. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

Structural Evolution of Amorphous Calcium Sulfate Nanoparticles into Crystalline Gypsum Phase

Structural Characteristics of Amorphous Calcium Sulfate: Evidence to the Role of Water Molecules

Formation of spherical calcium sulfate mesocrystals: orientation controlled by subunit growth

The structure of CaSO4 nanorods -- the precursor of gypsum

Particle-Mediated Nucleation Pathways Are Imprinted in the Internal Structure of Calcium Sulfate Single Crystals

α-Calcium Sulfate Hemihydrate Nanorods Synthesis: A Method for Nanoparticle Preparation by Mesocrystallization

A Facile Method to Control the Structure and Morphology of Α-Calcium Sulfate Hemihydrate

Crystallization at Multiple Sites Inside Particles of Amorphous Calcium Phosphate

Solid-State Phase Transformation and Self-Assembly of Amorphous Nanoparticles into Higher-Order Mineral Structures

Facile Synthesis and Properties Research of Single Crystal Calcium Sulfate Nanotubes Through Reverse Micelle Method

Trace NaCl and Na2EDTA Mediated Synthesis of Α-Calcium Sulfate Hemihydrate in Glycerol–Water Solution

Hierarchical synchrotron diffraction and imaging study of the calcium sulfate hemihydrate–gypsum transformation

Novel morphologies and phase transformation of CaCO3 crystals formed in CDS and urea aqueous solution

Shape-preserving Amorphous-to-crystalline Transformation of CaCO 3 Revealed by in Situ TEM

Phase- and Morphology-Controlled Crystallization of Gypsum by Using Flue-Gas-desulfurization Gypsum Solid Waste

Crystallization of smooth amorphous calcium phosphate microspheres to core-shell hydroxyapatite microspheres

Amorphous 1-D nanowires of calcium phosphate/pyrophosphate: A demonstration of oriented self-growth of amorphous minerals

Microemulsion synthesis of anhydrous calcium sulfate nanowhiskers with calcium acetate solution and its surface structure stable and crystal phase evolution after modification

Calcium Sulfate Polymorph Evolution Dominated by Competitive Nucleation in Gypsum Metastable Zone

Calcium carbonate crystals with different morphologies nucleated on the self-assembled monolayer

In situ Observation of Structural Evolution and Phase Engineering of Amorphous Materials during Crystal Nucleation