Abstract:High-speed, pressure-compensated variable displacement piston pumps are widely used in aircraft hydraulic systems for their high power density. The swash plate is controlled by the pressure-compensated valve, which uses pressure feedback so that the instantaneous output flow of the pump is exactly enough to maintain a presetting pressure. The oscillation of the swash plate is one of the major excitation sources in the high-speed piston pump, which may cause lower efficiency, shorter service life, and even serious damage. This paper presents an improved model to investigate the influence of the variable displacement mechanism on the swash plate oscillation and introduces some feasible ways to reduce oscillation of the swash plate. Most of the variable structural parameters of the variable displacement mechanism are taken into consideration, and their influences on swash plate oscillation are discussed in detail. The influence of the load pipe on the oscillation of the swash plate is considered in the improved model. A test rig is built and similarities between the experiments and simulated results prove that the simulation model can effectively predict the variable displacement mechanism state. The simulation results show that increasing the volume of the outlet chamber, the spring stiffness of the control valve, the action area of the actuator piston, and offset distance of the actuator piston can significantly reduce the oscillation amplitude of the swash plate. Furthermore, reducing the diameter of the control valve spool and the dead volume of the actuator piston chamber can also have a positive effect on oscillation amplitude reduction.

Analytical Harmonic Method for Modeling High-Frequency Oscillation with Applications to Aircraft Piston Pump Vibration Analysis

Detecting Oscillations Via Adaptive Chirp Mode Decomposition.

A Theoretical Dynamic Model to Study the Vibration Response Characteristics of an Axial Piston Pump

Flow characteristics simulation and low-noise design of fuel piston pump

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

A Hybrid Lumped Parameters/Finite Element/Boundary Element Model to Predict the Vibroacoustic Characteristics of an Axial Piston Pump

Investigation into the Effects of the Variable Displacement Mechanism on Swash Plate Oscillation in High-Speed Piston Pumps

Nonlinear dynamic modeling and analysis for aviation axial piston pump in center spring return mechanism

An Investigation into the Swash Plate Vibration and Pressure Pulsation of Piston Pumps Based on Full Fluid-Structure Interactions

Theoretical and Simulation Investigations on Flow Ripple Reduction of Axial Piston Pumps Using Nonuniform Distribution of Pistons

Investigation Into The Effects Of Index Angle On Fluidborne Noise And Structureborne Noise Of A Tandem Axial Piston Pump

Experimental Investigation on the Noise Reduction of an Axial Piston Pump Using Free-Layer Damping Material Treatment

Dynamic Impact of Hydraulic Systems Using Pressure Feedback for Active Damping

Effects of Index Angle on Flow Ripple of a Tandem Axial Piston Pump

Incremental Harmonic Balance Method for Predicting Amplitudes of a Multi-D.o.f. Non-Linear Wheel Shimmy System with Combined Coulomb and Quadratic Damping

Dynamic Modeling and Vibration Characteristics of Multibody System in Axial Piston Pump

A Novel Pulsation Attenuator for Aircraft Piston Pump

A Robust and Efficient Stability Analysis of Periodic Solutions Based on Harmonic Balance Method and Floquet-Hill Formulation

SPH Method with Applications of Oscillating Wave Surge Converter

Nonlinear dynamic of turbulent bearing-rotor system under quadratic damping with HSFD and active control

Oscillation Characteristic of a Free Piston Linear Alternator