Abstract:It is important to characterize the composition of aerosol particles in air, which causes adverse health effects and millions of deaths each year. Aerosol, or particulate matter (PM), is difficult to characterize because of its wide range of particle sizes; constituents (various organic and inorganic compounds); concentration; morphology; state (liquid or solid); and time-dependent modification. Infrared (IR) spectroscopy is a non-destructive method, which provides useful chemical information about the constituents. Current methods for collecting samples use filters that are made of materials which interferes with the IR spectra and thus lowers detection capabilities. Hence, collection on an IR-transparent substrate is desirable. In order to make a good quantitative measurement of the composition of the aerosol using IR-spectroscopy, a collector design should achieve some objectives. Low size-dependence, low chemical interference, and high collection efficiency are required to collect an aerosol sample that is identical to the aerosol in air. Furthermore, high spatial uniformity in deposition pattern is required to reduce optical artefacts or spectrometer dependence, and high collection mass flux is required to reduce the collection time needed for making a confident claim. Electrostatic precipitation (ESP) is a versatile method of aerosol collection and does not suffer from high pressure drop (which can modify the aerosol chemical composition, for example in filtration), or from bounce-off effects (which preferentially samples the size range and liquids, for example in impaction). ESP devices for particle deposition are present in either a translationally symmetric design (linear system) or a radially symmetric design (radial system). Most ESP designs in the public domain have been designed for different purposes and face limitations for fulfilling objectives stated above. Hence, a new device is necessary to meet performance objectives. Our design is based on an analytical, dimensionless (scalable) mathematical model that embodies the physics of particle migration trajectories due to fluid dynamics and electrostatics that lead to particle capture in a two-stage ESP device. This model allowed us to evaluate the tradeoffs among objectives to arrive at a design optimized across multiple objectives, and across multiple length scales (due to its dimensionless form). We validated this model against numerical simulations using COMSOL Multiphysics software, which is considered to be accurate but can only be run for a limited number of configurations (with respect to geometry and operating parameters) due to its high computational cost. Using the validated analytical model, we investigate the relationship among device geometry, methods of particle introduction, operational parameters, and deposited particle positions (which determines collection efficiency, uniformity, and size dependence), to arrive at a range of designs that meet design criteria. We further report the fabrication of a suitable embodiment using 3D-printing while incorporating ease of operation and handling. Measurement capabilities and limits of the device using different laboratory-generated aerosol are reported.

Apparatus and method for measuring particulate matter by optical method

On-line High-Accuracy Particulate Matter Monitoring Technology Using Multi-Channel Scattering Signals

Measuring Particulate Concentration by Means of Scattered Light Scintillation

Volatile organic compound determination device and method

Total particle detecting device and sampling method

Measurement of Carbonaceous Aerosol with Different Sampling Configurations and Frequencies

A Simple Optical Aerosol Sensing Method of Sauter Mean Diameter for Particulate Matter Monitoring

A portable fiber-optic chemical device for the quantitative determination of carbon monoxide from automobile exhaust emissions

The measuring technique of mass concentration and particle size in particulate emissions

Research on Particle Concentration Detection System Based on Laser Scattering Method

Method and apparatus for quantitative measurement of aerosol composition using controlled collection of airborne particles

A case study evaluating the performance of a cost-effective optical particle counter coupled with a humidity compensation approach for ambient air monitoring of particulate matter

Total particulate matter detection device

Development of Optical Small Particles Counting Device

Direct and Continuous Measuring the Emission Mass Concentration of Smoke and Dust

Detection of Particle Concentration and Particle Size Based on Aerodynamic Particle Size Spectrometer

A miniature system for particulate matter (PM) measurement

Optical remote sensing to quantify fugitive particulate mass emissions from stationary short-term and mobile continuous sources: part I. Method and examples

Community monitoring method of microorganism carried by air particulate matters with multiple particle sizes

A Three-Wavelength Optical Sensor for Measuring the Multi-Particle-Size Channel Mass Concentration of Thermal Power Plant Emissions

Ambient aerodynamic desorption/ionization method for microparticle mass measurement.